• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.141-146
• /
• 2012

본 논문에서는 영상 기반 자동 착륙 시스템 개발과 이 시스템을 사용하는 멀티로터 플랫폼 개발에 대해서 소개 한다. 멀티로터 플랫폼은 뉴턴 오일러 개념을 근간으로 하는 강체 운동 모델링을 하였고, LQR 제어 기법을 통한 제어기 튜닝 및 시뮬레이션을 하였다. 영상기반 자동 착륙 시스템은 멀터로터 시스템에 탑재된 단일 카메라를 사용하여 추가적인 임무장비 없이 증강 현실 알고리즘을 사용하여 마커를 탐지하고 정밀한 착륙을 유도하도록 GCS와 연동 코드를 구현 하였다.

• 한국운동역학회지
• /
• 제20권3호
• /
• pp.311-318
• /
• 2010

This study examined the double piked dismount among the landing techniques of parallel bars based on three-dimensional motion analysis. Four male national gymnasts were the subjects. This study was performed to provide quantitative data highlighting players strengths and weaknesses to enable more stable landing technique. The variables analyzed were the position and velocity of center of gravity(CG) and angles of shoulder joints, hip joints, and trunk. The results are as follows: S1 secured the height of flight with fast vertical rise. After the easy spin in the air, he conducted a stable landing maintaining a proper hip joints angle. S2, S3, and S4, however, began the backward somersault already before leaving the bars, so they moved backward greatly making it more difficult to achieve a higher flight path. As a result, they couldn't control the velocity of their backward movement at landing. For a stable landing, they have to maintain the negative shoulder angle when rising, minimize both antero-posterioror side-to-side movements by doing a strong tap using hip joints, to secure the height of flight before the somersault. Results also show that at the descent, they should conduct rapid spinning by increasing their shoulder and hip joints to the maximum while controlling their velocity.

• 한국항공우주학회지
• /
• 제40권7호
• /
• pp.601-607
• /
• 2012

착륙장치는 완충장치를 이용하여 항공기 착륙 시의 충격을 흡수하는 역할을 한다. 군용 헬기를 비롯한 일부 항공기에서는 비상 착륙시 탑승원의 생존성과 안전성을 향상시키기 위해, 착륙장치에 내추락 요구조건을 부여하기도 한다. 이 논문에서는 관련 규정에서 요구하고 있는 내추락 요구조건을 충족하는 착륙장치 설계 개념을 제시하고, 성능해석 및 낙하시험을 통한 입증 과정을 소개한다. 추락 시 착륙장치 충격흡수 능력과 거동은 낙하시험 시 측정한 다양한 센서 데이터 및 고속 카메라로 촬영한 동영상 분석을 통해 확인할 수 있다.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.138-148
• /
• 1999

Thermal deformations of tension mask under localized heating are analyzed using finite element method and electron beam landing shifts are predicted by the analysis results. In CRT, electron beam landing shifts due to thermal deformations of the tension mask make the color purity of screen worse. In order to get the final results of thermal deformations, firstly the tension processes of the mask and following welding processes between the tensional mask and rail must be analyzed sequentially. And then, nonlinear transient thermo-elastic finite element analysis is performed on every part inside CRT including tension mask, wherein thermal radiation is a main heat transfer mechanism. Because the tension mask has numerous slits, the effective thermal conductivity and effective and effective elastic modulus is calculated, and the tension mask is modeled as a shell without slits. From the displacement results of tension mask, electron beam landing shifts is calculated directly. Experiments are performed to confirm our analysis results. Temperature distributions and beam landing shifts of tension mask are measured and the results are in good agreement with those of analyses.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.87-94
• /
• 2006

본 연구에서는 헬리콥터 스키드형 강착장치에 대한 비선형 충돌해석을 수행하였으며, 실제 운용중인 헬리콥터(SB427)의 강착장치 시스템이 해석에 고려되었다. 재료의 소성 거동특성과 두께변화를 고려한 3차원 유한요소 모델을 구축하였으며, LS-DYNA(Ver.970)를 활용하여 다양한 충돌 조건에 대한 전산충돌해석을 수행하여 특성을 검토하였다. 지면충돌에 기인한 강착장치의 비선형 천이응답이 설계요구조건에 대해 검토되었다. 다양한 충돌조건에 대해 비선형 충돌해석으로 예측한 최대 구조 변형량을 실험결과와 정량적으로 비교하였으며, 마찰의 영향을 고려하는 것이 해석결과의 정확성에 매우 중요함을 보였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.356-368
• /
• 2013

The Korea Aerospace Research Institute plans to launch a lunar module by 2025, and so is carrying out a preliminary study. Landing stability on the lunar surface is a key design factor of a lunar module. In this paper, a 1/6 scale model of a lunar module is investigated, for its landing stability on non-level surfaces. The lunar module has four tripod legs, with aluminum honeycomb shock absorbers in each leg strut. ADAMS$^{TM}$, the most widely used multi-body dynamics and motion analysis software, is used to simulate the module's lunar landing. Three types of dampers in the struts (rigid, viscous, and aluminum honeycomb dampers), and two types of lunar surfaces (rigid and elastic) are considered. The Sforce function is adopted, to model the aluminum honeycomb dampers. Details on the modeling and analysis of the landing stability of the 1/6 scale lunar module and the simulation results are provided in this paper.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.1-12
• /
• 2004

The purpose of this study is to provide training materials for practical use by investigating the kinematical variables of the successful landing by the type of the salto backward such as Tuck, Pike. For this study, the subjects are 4 male national gymnasts using 3-dimensional cinematographic method. Based on the results of this study, the conclusions are drawn as follows. 1. In flight phase, Tuck and Pike show fast extension after completing minimum angle of hip joint passing through the peak. It is very important factor to control body with gaining time before landing while decreasing the velocity of flight rotaion. 2. In Landing phase, the angles of each joint for successful landing are shown as $92deg{\sim}100deg$ for knee angle, $52deg{\sim}57deg$ for hip angle, and $56deg{\sim}70deg$ for shoulder angle. 3. Tuck and Pike dramatically decrease the height of COG, and horizontal/vertical velocity of COG from TD to LD. Also, it is shown that the knee angle, the hip angle and the shoulder angle decrease drastically. On the other hand, the angular velocity of trunk rotation shows negative direction and due to this, the angle of trunk rotation is shown as re-flexion.

• 한국운동역학회지
• /
• 제23권1호
• /
• pp.63-76
• /
• 2013

The purpose of this study was to investigate the effects of knee joint muscle fatigue and overweight on the angular displacement and moments of the lower limb joints during landing. Written informed consent forms, which were approved by the human subject research and review committee at Dong-A University, were provided to all subjects. The subjects who participated in this study were divided into 2 groups: a normal weight group and an overweight group, consisting of 15 young women each. The knee joint muscle fatigue during landing was found to increase the dynamic stability by minimizing the movements of the coronal and horizontal planes and maintaining a more neutral position to protect the knee. The effect of body weight during landing was better in the normal weight group than in the overweight group, with the lower limbs performing their shock-absorbing function in an efficient manner through increased sagittal movement. Therefore, accumulated fatigue of knee joint muscles or overweight may be highly correlated with the increase in the incidence of injury during landing after jumping, descending stairs, and downhill walking.

• Advances in aircraft and spacecraft science
• /
• 제5권3호
• /
• pp.319-334
• /
• 2018

In this study, the failure mode and energy absorption capabilities of a composite shock absorber device, during an emergency landing are evaluated. The prototype has been installed and tested in laboratory simulating an emergency landing test condition. The crash absorber presents an innovative configuration able to reduce the loads transmitted to a helicopter fuselage during an emergency landing. It consists of a composite tailored tube installed on the landing gear strut. During an emergency landing this crash absorber system should be able to absorb energy through a pre-designed deformation. This solution, compared to an oleo-pneumatic shock absorber, avoids sealing checks, very high values of the shock absorber pressure, and results to be lighter, easy in maintenance, inspect and use. The activities reported in this paper have become an attractive research field both from the scientific viewpoint and the prospect of industrial applications, because they offer benefits in terms of energy absorbing, weight savings, increasing the safety levels, and finally reducing the costs in a global sense.

• 한국운동역학회지
• /
• 제29권3호
• /
• pp.137-143
• /
• 2019

Objective: Ligament laxity and hypotonia are characteristics of Down syndrome patients. The aim of this study was to compare the landing pattern between Down syndrome patients and typically developing subjects. To compare the landing pattern, variables related to ligament laxity and hypotonia i.e. vertical stiffness and lower extremities kinematics were investigated. Method: Five subjects with Down syndrome (age: $14.6{\pm}1.8years$, mass: $47.6{\pm}6.94kg$, height: $147.9{\pm}6.0cm$) and six able-bodied subjects (age: $13.2{\pm}0.4years$, mass: $54.7{\pm}6.7kg$, height: $160.1{\pm}9.8cm$) participated in this study. Results: The vertical displacement of the center of mass, vertical reaction force, leg stiffness and range of ankle angle range among Down syndrome patients were significantly different than typically developing group. The youth with Down's syndrome appeared to receive greater vertical impact force at landing than normal youth. Conclusion: The differences in the biomechanical characteristics suggest the delay in motor development among Down syndrome patients and an increased risk of injury to the lower extremity during movement execution such as drop landing.