• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.139-144
• /
• 2000

This study was conducted to obtain the basic information to increase the practical use of soil survey data through the subdividing of valley shapes with soil sequences due to different parent rocks, and to study the relationship between the valley shapes and parent rock. The various rocks such as sedimentary(gray shale and sand stone) and igneous rocks(granite, granite gneiss and andesite porphyry) which are the major parent rocks in Yeongnam area were investigated. The characteristics of valleys formed and the kinds of soils derived from different rocks were analysed by using aerial photographs and topographical maps scaled 1:5,000. The rill density in igneous rock area was as high as 40. But the rill bifurcation ratio of first order stream was higher in the sedimentary than the igneous rocks except granite area. The mean slope of valleys in igneous areas was about 8%, which was higher than that of the sedimentary areas. The variability of valley width in the complexly metamorphosed rock, such as granite gneiss, and andesite porphyry, was greater than in sedimentary and in granite rocks. Based on the variability of valley widths and valley slopes, it was possible to classify the valleys into two types. The "Uterus-shaped valleys" had wide variability of valley width and were located in the areas of granite gneiss and andesite porphry rocks. while the "Roots-shaped valleys" had narrow variability of valley width and were located in the sedimentary areas. "Uterus-shaped valleys" were typified by having land forms of mountain foot slopes and alluvial fans, and the soil drainage sequences also had complexities. So that, we concluded that the variability of valley width and valley slopes was associated with kinds of parent rocks and metamorphism which influences soil sequence and characteristics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.804-811
• /
• 2010

The lower portion of sloping paddy fields normally contains excessive moisture and the higher water table caused by the inflow of ground water from the upper part of the field resulting in non-uniform water content distribution. Four drainage methods namely Open Ditch, Vinyl Barrier, Pipe Drainage and Tube Bundle for multiple land use were installed within 1-m position from the lower edge of the upper embankment of sloping alluvial paddy fields. Knowledge of the spatial variability of soil water properties is of primary importance for management of agricultural lands. This study was conducted to evaluate the effect of drainage in the soil on spatial variability of soil water content using the geostatistical analysis. The soil water content was collected by a TDR (Time Domain Reflectometry) sensor after the installation of subsurface drainage on regular square grid of 80 m at 20 m paddy field located at Oesan-ri, Buk-myeon, Changwon-si in alluvial slopping paddy fields ($35^{\circ}22^{\prime}$ N, $128^{\circ}35^{\prime}$). In order to obtain the most accurate field information, the sampling grid was divided 3 m by 3 m unit mesh by four drainage types. The results showed that spatial variance of soil water content by subsurface drainage was reduced, though yield of soybean showed the same trends. Value of "sill" of soil water content with semivariogram was 9.7 in Pipe Drainage, 86.2 in Open Ditch, and 66.8 in Vinyl Barrier and 15.7 in Tube Bundle.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.151-162
• /
• 2021

The recent trend of using ornamental grasses as essential landscaping plants has become more prominent, while the demands for today's gardens are to solve the challenges of climate change, biodiversity loss, and urban ecosystem services. Nowadays, the interest in ornamental grasses in South Korea is dramatically increasing, as is the number of available species and varieties. To find the better use of ornamental grasses in urban green spaces, more research should be conducted to understand the current state of ornamental grasses and their characteristics in South Korea. and a practical way of applying ornamental grasses to urban gardens should be devised. For that purpose, this research carried out a survey on the current state of ornamental grasses distributed in the landscaping plants market in South Korea. The grasses were analyzed according to the growing conditions, including habitats, ecological, and horticultural growth characteristics. As a result, 40 genera, 104 species, and 264 taxa of ornamental grasses were verified to be distributed in the market for garden plants in South Korea in August 2021. Poaceae and Cyperaceae are 69.7% and 28.4% among them, respectively. Juncaceae and Typhaceae are of little importance. No Restionaceae is supplied yet. Most of the Poaceae ornamental grasses prefer sunny open land, but others from various habitats are used too. The majority of the Cyperaceae ornamental grasses originate from woodlands, woodland edges, water's edges, and marshes. The market supplies fourteen genera of cool-season and sixteen genera of warm-season grasses. According to life-types of grasses, thirty-eight species are evergreens or semi-evergreens. Thirty-four species are deciduous. Seven species are summer-dormant. According to the growth habits of the grasses, thirty-three species are runners and fifty-one species are clumpers. There are fifteen taxa of ornamental grasses recently selected that have become native grasses.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.199-210
• /
• 2022

This study aimed to develop a cropping system to use limited crop-land with optimum efficiency, while considering management from farmers. To establish the cropping system involving a two-year rotation of three crops, three types of cropping system were evaluated in Suwon (Seogcheon series) and Anseong (Geumcheon series) in the middle plain area using six crops from 2018 to 2019: maize-perilla-onion, potato-sesame-garlic, and maize-sesame-onion. The crop productivity and income of the cropping systems involving food-, oilseed-, and horticultural crops were analyzed, and the optimal cropping system was reviewed. The total yield of each crop was as follows: maize 1,281 kg, potato 4,837 kg, perilla 125 kg, sesame 120 kg, onion 6,503 kg, and garlic 1,027 kg per 10a. However, in terms of gross profit, the potato was more than 3.8 times more profitable than corn, sesame was 1.8 times more profitable than perilla, and garlic was more than 2.8 times more profitable than onions. As a result, in terms of net income, the potato-sesame-garlic cropping system produced the highest income per unit area. Sesame seedlings were planted after the potato harvest, thereby solving the problem of competition between the first and last crops. Overall, this study confirmed that the potato-sesame-garlic cropping system, a two-year rotation of three crops, contributed to the improvement of upland crop productivity and farmers' income and was an overall effective cropping system.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.45-56
• /
• 2023

In stream ecosystem assessment, RIVPACS, which makes a simple but clear evaluation based on macroinvertebrate community, is widely used. In this study, a preliminary study was conducted to develop a RIVPACS-type model suitable for Korean streams nationwide. Reference streams were classified into two types(upstream and downstream), and a prediction model for macroinvertebrates was developed based on each family. A model for upstream was divided into 7 (train): 3 (test), and that for downstream was made using a leave-one-out method. Variables for the models were selected by non-metric multidimensional scaling, and seven variables were chosen, including elevation, slope, annual average temperature, stream width, forest ratio in land use, riffle ratio in hydrological characteristics, and boulder ratio in substrate composition. Stream order classified 3,224 sites as upstream and downstream, and community compositions of sites were predicted. The prediction was conducted for 30 macroinvertebrate families. Expected (E) and observed fauna (O) were compared using an ASPT biotic index, which is computed by dividing the BMWPK score into the number of families in a community. EQR values (i.e. O/E) for ASPT were used to assess stream condition. Lastly, we compared EQR to BMI, an index that is commonly used in the assessment. In the results, the average observed ASPT was 4.82 (±2.04 SD) and the expected one was 6.30 (±0.79 SD), and the expected ASPT was higher than the observed one. In the comparison between EQR and BMI index, EQR generally showed a higher value than the BMI index.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.104
• /
• pp.70-100
• /
• 2023

The celadon made in the Goryeo era, a time when Buddhism was flourishing in Korea, naturally contains many elements of Buddhist culture. Among them, inlaid celadon with Sanskrit inscriptions bears a close relationship with esoteric Buddhism. However, the research on deciphering the Sanskrit inscriptions has made little progress due to the small number of extant examples. However, the four recent excavations at the No. 23 kiln site in Sadang-ri, Gangjin have yielded new materials that allow the existing materials to be categorized into several types. The results obtained through the reading and interpretation of the inscriptions are as follows: First, the Sanskrit characters inlaid on the celadon were parts of mantras. Inscriptions where only one character is apparent cannot be deciphered, but scholars have revealed that others are written in the manner of a wheel mantra represent the "Mantra for Purifying the Dharma-Realm," "Six-Syllable Mantra of the Vidyaraja," "Sweet Dew Mantra," "Jewel Pavilion Mantra," "Mantra of the Savior Bodhisattva," "Dharani of the Mind of the Budha of Infinite Life," and "Mantra for Extinguishing Evil Rebirth." Each mantra was written in Siddham script. Second, they are believed to have been produced during the thirteenth and fourteenth centuries based on the arrangement of the inscriptions and the way the "Sweet Dew Mantra" is included in the "40 Hands Mantra." In particular, the celadon pieces with a mantra inlaid in a concentric manner are dated to the late thirteenth and early fourteenth centuries based on their production characteristics. Third, the interpretation of the inlaid mantras suggests that they all refer to the "Shattering Hell" and "Rebirth in the Pure Land." Based on this, it can be concluded that some of these inlaid celadon wares with mantras may have been used in Buddhist rituals for the dead, such as the ritual for feeding hungry ghosts (施餓鬼會). Also, because the Sadang-ri No. 23 kiln site and the "ga" area of the site are believed to have produced royal celadon, it is likely that these rituals were performed at the royal court or a temple under its influence. Fourth, this inlaid Goryeo celadon with Sanskrit mantras was not a direct influence of the ceramics of Yuan China. It emerged by adopting Yuan Chinese Buddhist culture, which was influenced by Tibetan Buddhism, into Goryeo Korea's existing esoteric practices. Fifth, the celadon wares inlaid with a Sanskrit mantra reveal a facet of the personal esoteric rituals that prevailed in late Goryeo society. Changes in esotericism triggered by the desire for relief from anxieties can be exemplified in epitaph tablets and coffins that express a shared desire for escaping hell and being born again in paradise. Sixth, the inlaid celadon with Sanskrit mantras shares some common features with other crafts. The similarities include the use of Siddham Sanskrit, the focus on Six-Syllable Mantra of the Vidyaraja, the correspondence with the contents of the mantras found on Buddhist bells, wooden coffins, and memorial tablets, and their arraignment in a similar manner with rooftiles. The major difference between them is that the Mantra for Extinguishing Evil Rebirth and the Sweet Dew Manta have not yet been found on other craftworks. I believe that the inscriptions of Sanskrit mantras are found mainly on inlaid celadon vessels due to their relatively low production cost and efficiency.