• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.525-527
• /
• 2005

The LED light source has many excellent advantages for the application of LCD backlight module. As we know, the operational temperature can significantly influence the characteristics of LEDs. Heat can decrease LED's output light intensity and make its dominant wavelength (${\lambda}d$) drift. These two factors make display's color temperature change and induce different NTSC results. Here, we perform an important relation between NTSC and the above two factors of LED-LCD display.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.186-188
• /
• 1994

Fundamental characteristics of Giant Magnetostrictive Alloy Terfenol-D$(Tb_{0.3}Dy_{0.7}Fe_{1.9\sim1.95})$ were measured by experiments. Magnetostrictions of Terfenol-D samples whose lengths are 15 and 25 mm have been measured under compressive stress from 0 to 14 MPa, when the applied magnetic field was up to 1200 Oe. The relationship between magnetostriction and field is shown graphically in the form of $H-{\lambda}$, curve. For the experiment, solenoid magnet and lever-arm-type stress equipment were designed and fabricated. The magnetostriction is measured by laser displacement measuring system and the stress applied to the sample is measured by load cell.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.45-51
• /
• 2006

We conducted simultaneous, small-angle, X-ray scattering/differential scanning calorimetry (SAXS/DSC) and simultaneous, wide-angle, X-ray scattering (WAXS)/DSC measurements for a polymer blend of poly($\varepsilon$-caprolactone)/poly(ethylene glycol)(PCL/PEG). The time-dependent SAXS/DSC and WAXS/DSC results, measured while the system was quenched below the melting temperature of PCL from a melting state, revealed the competitive behavior between liquid-liquid phase separation and crystallization in the polymer blend. The time-dependent structural evolution extracted from the SAXS/WAXS/DSC results can be characterized by the following four stages in the PCL crystallization process: the induction (I), nucleation (II), growth (III), and late (IV) stages. The influence of the liquid-liquid phase separation on the crystallization of PCL was also observed by phase-contrast microscope and polarized microscope with 1/4$\lambda$ compensator.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.69-81
• /
• 2002

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP-centric signaling and control architecture based on the generalized multi-protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross-connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS-based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user-network interface and network-network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to generalized MPLS signaling.

• Journal of ILASS-Korea
• /
• v.5 no.3
• /
• pp.9-16
• /
• 2000

In a SI engine, three-way catalyst converter has the best efficiency when A/F ratio is near the stoichiometry. The feedback control using oxygen sensors in the commercial engine has limits caused by the system delays. So it is necessary to control fuel quantity in accordance with intake air amount in order to reduce exhaust emission and improve the specific fuel consumption. Precise A/F ratio control requires measurement of air amount with respect to the cylinder and injection fuel according to the air amount In this paper, we applied nonlinear fuel injection model and developed the algorithm of A/F ratio control. This algorithm includes the methods of measurement of transient air mass flowing into each cylinder, of calculation of injection pulse width for measured air mass, and the method of feedback and engine control by using lambda sensor. Also we developed control program for IBM-PC by using C++ Builder, and tested it in the commercial engine.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.72-75
• /
• 2016

스마트폰, 센서, 소셜미디어, 웹 서비스 등으로부터 발생되는 데이터의 폭증으로 인하여 빅데이터의 분석 및 활용에 대한 요구가 커져가고 있다. 특히 스마트 기기의 발달과 사용자 이용 패턴의 변화로 인하여 스트림 데이터는 끊임없이 발생되고 있지만, 기존의 하둡을 이용한 분석 시스템은 응답시간이 지연되어 빠르게 결과를 조회할 수 없는 단점으로 인하여 데이터를 실시간으로 분석하여 바로 활용할 수 있는 시스템에 대한 요구가 점점 더 증가하면서 람다 아키텍쳐가 등장하였다. 람다 아키텍쳐는 데이터 처리 과정을 배치 레이어와 스피트 레이어로 나누고, 스피드 레이어에서는 배치 결과가 나오기 전까지 스트림으로 유입되는 데이터를 실시간으로 분석하여 가장 최근의 데이터를 빠르게 조회 할 수 있도록 결과를 제공한다. 본 논문에서는 람다 아키텍쳐를 활용하여 연속적으로 유입되는 대용량의 스트림 데이터를 효과적으로 처리하여 실시간 분석과 동시에 배치 분석을 제공하는 데이터 처리 시스템을 설계하고 구현한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.75-80
• /
• 2001

Holographic polymer dispersed liquid crystals (HPDLCs) have fabricated by irradiating an Ar-ion laser ( ${\lambda}$=514nm) at various intensity on LC/acrylate monomer mixtures which were sandwitched between two ITO coated glass plates. Monomer systems were composed of dipentaerythritol-hydroxy penta acrylate (DPHPA, f=5)/monofunctional acrylate monofunctional monomers. The LC used in this system was E7 (BL001, Merck). Gratings were fabricated by periodic interference of twobeams. Reflection efficiency-irradiation intensity-monomer type relationships were obtained from the UV-visible spectra of the HPDLC films. Peaks were found at a bit smaller wavelength than 514nm, due to the shrinkage of mixture volume upon polymerization. Real time measurements of diffraction efficiency have been obtained according to monomer types and LC contents.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.455-457
• /
• 2011

PIN type의 LED(${\lambda}=630nm$)와 photo TR을 이용하여 PPG 센서를 제작하였다. 이 때, LED의 광출력은 window 통과 후, 약 $240{\mu}W$이다. 그리고 인체에서 흡수 및 반사가 이루어진 후의 광파워는 더욱 작기 때문에 이를 보완하기 위해 photo TR을 LED 양측으로 배치하여 주변으로 반사하는 광을 측정하였다. 측정 된 신호는 filter와 OP amp.를 이용하여 1차 처리과정을 거치고, 알고리즘을 이용하여 2차 처리 하였다. 또한 알고리즘은 평상시를 포함하여 운동시에도 측정이 가능하도록 설계하였다.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.438-440
• /
• 2003

This paper resents an application of an Artificial Neural Network(ANN) technique to forecast the short-term system marginal price(SMP). The forecasting of SMP is a very important factor in an electricity market for the optimal biddings of market participants as well as for the market stabilization of regulatory bodies. The proposed neural network scheme is composed of three layers. In this process, input data are set up to reflect market conditions. And the $\lambda$ that is the coefficient of activation function is modified in order to give a proper signal to each neuron and improve the adaptability for a neural network. The reposed techniques are trained validated and tested with the historical real-world data from korea Power Exchange(KPX).

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.472-473
• /
• 2014

본 논문에서는 직렬운전 소형풍력발전시스템의 해석 방법과 최대 파워를 추종하는 MPPT(Maximum Power Point Tracking)기법을 제안한다. 소형풍력 발전시스템은 개별 발전기에서 생성되는 역기전력이 낮아 배터리 충전과 같은 독립적인 부하에 전원을 공급하는 용도로 쓰이나 발전기를 N개 직렬연결하면 계통연계가 가능하다. 일반적인 풍력발전 시스템에서의 블레이드 출력은 출력 계수($C_p$) 곡선의 형태에 의해서 결정되고, 출력계수 곡선은 주속비(${\lambda}$)의 함수로 표현된다. N개의 발전기를 직렬연결 하는 경우 각기 다른 풍속에 대하여 출력파워 해석이 곤란하므로, 직렬 운전 시 발전기토크를 기준으로 한 해석과 이에 적합한 MPPT 방법을 제안한다.