• 제목/요약/키워드: LAB color

검색결과 426건 처리시간 0.027초

Color Capture Device의 저조도 감도 향상 방안 (Sensitivity Improvement Method for Color Capture Device At Low Illumination Conditions)

  • 김일도;전재성;최병선;박상규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2007년도 하계종합학술대회 논문집
    • /
    • pp.235-236
    • /
    • 2007
  • CCD(Charge-Coupled Device) 혹은 CMOS (Complementary Metal Oxide Semiconductor)와 같은 소자를 이용하여 빛을 전기적 신호인 Image로 재구성하는 촬상소자(Color Capture Device)는 촬영환경이 어두워지면 Dynamic Range가 작아지고, Noise가 상대적으로 심해진다[1][2]. 본 논문에서는 촬영 환경이 어두울 때, Resolution을 Preserving하는 Pixel Pitch가 큰 촬상 소자와 Motion Blur를 억제하는 Exposure Time이 긴 촬상 소자의 조합을 신호처리로 구현하여, 신호의 Power를 향상시켜 Dynamic Range를 키우고 Noise의 Boost-up을 억제하여 SNR(Signal to Noise Ratio)을 향상시키는 방식으로, 촬상 장치의 감도를 향상시켜 화질을 개선하는 방법을 제안한다.

  • PDF

도포법 및 침전법을 이용한 지르코니아의 색조 재현성 비교 연구 (Comparative study of color reproducibility of zirconia using a dipping method and coating method)

  • 이희정;김재홍;김웅철;김지환;김혜영
    • 대한치과기공학회지
    • /
    • 제35권3호
    • /
    • pp.185-192
    • /
    • 2013
  • Purpose: The aim of this study was to compare with color reproducibility of the coating method and dipping method using a colour liquid. Methods: Two groups of square-shaped specimens ($10mm{\times}10mm$ in diameter, 1.5mm thickness) were prepared for analysis(n=15/group). The CM(Coating Method) group was fabricated as full zirconia specimens with the coating coloring method and Group DM(Dipping Method) was prepared as specimens of 0.7 mm-thick zirconia plate using the dipping coloring method and veneered with 0.8mm-thick porcelain. Color parameters were measured with ShadeEye $NCC^{(R)}$ spectrophotometer and color differences were calculated using the equation ${\Delta}E^*= \{({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2\}^{1/2}$. Non-parametric statistical methods, the Mann-Whitney test, and the Kruskal-Wallis test were used to analyze the data. Type one error rate was set at 0.05. Results: Color difference values larger than 7 were observed between specimens with the coating method and the dipping method, which were detectable difference in a clinical setting. Conclusion: Cautious application of the coating coloring method in a clinical setting and further researches to standardize the coating method are needed.

부항자극에 대한 배수혈 어혈평가를 위한 색소침착 변화분석 (Analysis of Hyperpigmentation Change for Extravasated Blood Evaluation by Cupping Stimulation)

  • 김수병;이나라;주예일;이용흠;정병조
    • Korean Journal of Acupuncture
    • /
    • 제28권1호
    • /
    • pp.53-60
    • /
    • 2011
  • Objectives : Cupping therapy has been used as various treatment methods in oriental medicine clinic for a long time. Specially, Cupping stimulation caused skin hyperpigmentation which has been used as diagnosis method for extravasated blood & inner organs functional disease. But it was difficult to quantitatively measure and analyze the interrelation between extravasated blood and skin hyperpigmentation. The aim of this study is to measure the acupoint's RGB and melanin change pattern by stimulating under fixed 80kPa negative pressure and to evaluate the extravasated blood. Methods : To evaluate extravasated blood, 10 acupoints (left/right BL13, BL15, BL18, BL20, BL23) were stimulated by treatment 80kPa negative pressure for 1 minute. And then we measured the acupoints' skin color change patterns using the color meter, followed by RGB analysis and melanin change pattern. Results and Conclusions : We could observe the correlation of the acupoints' skin color condition related with RGB change pattern. All acupoints' color change degree were different. Regardless of acupoints' color degree due to extravasated blood, we observed in common the fact that RGB values decreased after stimulation and steadily increased according to time. We observed that melanin index increased after stimulation and recovered before stimulation-condition after the lapse of time. In other words, we confirmed the correlation between raised color change degree and $L^*a^*$ index change pattern. Therefore we observed the possibility of charting the $L^*a^*$ index following extravasated blood.

High resolution 5" full color field emission displays with new aging technique

  • Kim, J.M.;Hong, J.P.;Park, N.S.;Ryu, Y.S.;Jung, J.E.;Hong S.S.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1998년도 제14회 학술발표회 논문개요집
    • /
    • pp.23-23
    • /
    • 1998
  • High resolution field emission dispplay(FED) devices of 5 inch diagonal in size are fully developped for the applications of near-future flat ppanel dispplays. Under the unique gate-switching drive scheme electron trajectory pprofiles are simulated and tested by considering leakage effects of each ppixel. Uniquely-pprinted sppacer with high asppect ratio are fabricated on real ITO glass for high vacuum ppackaging. In addition new gas aging scheme of stabilizing field emitting array are extensively investigated during the sealing and exhausting pprocess in order to pprevent oxidation effects on the micro tipp. Finally fulll color images of 64 gray scale will be demonstrated.

  • PDF

여객선의 선원 작업공간 색채디자인에 관한 연구 (A Study of Color Design with Passenger Ship's Working Space)

  • 김홍태;박진
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2020년도 추계학술대회
    • /
    • pp.64-65
    • /
    • 2020
  • 현대화펀드를 통한 여객선 건조 지원을 통해 거주구 실내공간 디자인 수준은 향상되었지만, 여전히 선원이 활동하는 작업공간은 크게 개선되지 않는 상태이다. 본 연구는 여객선 선원 작업공간 중 조타실과 기관실의 색채환경을 조사한다. 선박 작업공간 환경의 실내디자인 특수성을 제시하고 이에 맞는 색채환경, 제안하는 색값을 통해 선원의 정신건강 증진과 안전한 근무환경을 조성하는 것에 있다.

  • PDF

The Influence of Oxygen on Czochralski Growth of Oxide Single Crystals

  • D. S. Chung;Park, B. H.
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
    • /
    • pp.179-181
    • /
    • 1997
  • When grown the oxide single crystal including Li-ion, optimum oxygen condition is needed. Color and crack are caused in single crystal according too the change in the condition of the oxygen. LiTaO₃ crystals grown from off-composition of congruent melt composition under oxygen deficieny condition didn't generate any crack. LiNbO₃. LiTaO₃ crystals grown from congruent melt composition under optimum oxygen condition caused pale yellow color or colorless with no crack. Color gradually became colorless and generated cracks according to Oxygen excess.

  • PDF

DEVELOPMENT OF CHLOROPHYLL ALGORITHM FOR GEOSTATIONARY OCEAN COLOR IMAGER (GOCI)

  • Min, Jee-Eun;Moon, Jeong-Eon;Shanmugam, Palanisamy;Ryu, Joo-Hyung;Ahn, Yu-Hwan
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.162-165
    • /
    • 2007
  • Chlorophyll concentration is an important factor for physical oceanography as well as biological oceanography. For these necessity many oceanographic researchers have been investigated it for a long time. But investigation using vessel is very inefficient, on the other hands, ocean color remote sensing is a powerful means to get fine-scale (spatial and temporal scale) measurements of chlorophyll concentration. Geostationary Ocean Color Imager (GOCI), for ocean color sensor, loaded on COMS (Communication, Ocean and Meteorological Satellite), will be launched on late 2008 in Korea. According to the necessity of algorithm for GOCI, we developed chlorophyll algorithm for GOCI in this study. There are two types of chlorophyll algorithms. One is an empirical algorithm using band ratio, and the other one is a fluorescence-based algorithms. To develop GOCI chlorophyll algorithm empirically we used bands centered at 412 nm, 443 nm and 555 nm for the DOM absorption, chlorophyll maximum absorption and for absorption of suspended solid material respectively. For the fluorescence-based algorithm we analyzed in-situ remote sensing reflectance $(R_{rs})$ data using baseline method. Fluorescence Line Height $({\Delta}Flu)$ calculated from $R_{rs}$ at bands centered on 681 nm and 688 nm, and ${\Delta}Flu_{(area)}$ are used for development of algorithm. As a result ${\Delta}Flu_{(area)}$ method leads the best fitting for squared correlation coefficient $(R^2)$.

  • PDF

조위관측기록지 이미지에서 그래프 영역 검출 기법 (The Detection Scheme of Graph Area from Sea Level Measurements Recording Paper Images)

  • 유영중;김영주;박성호
    • 한국정보통신학회논문지
    • /
    • 제14권11호
    • /
    • pp.2555-2562
    • /
    • 2010
  • 본 논문에서는 수작업을 최소화하면서 조위 기록지로부터 조위 기록 그래프를 추출하는 방법을 제안한다. 사용자가 그래프 상의 하나의 픽셀을 선택하면, 선택된 픽셀과 나머지 픽셀들과의 LAB 색상 공간상에서의 관계를 이용해 자동으로 대부분의 배경 픽셀들을 결정한다. 배경 픽셀들이 결정되면, 각 세로줄에서 그래프 영역으로 판단되는 한개의 픽셀을 추출하고, 이 픽셀을 시작 위치로 하여 나머지 그래프 영역을 추출한다. 실험 결과는 다양한 종류의 조위 기록지로부터 최소한의 수작업만으로 조위 기록 그래프 영역을 검출할 수 있음을 보여준다.