• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.50-56
• /
• 2009

This study was carried out to determine the optimum extraction conditions for Ishige okamurai by comparing the yields, total phenolic compound content (TPC), and antioxidant properties of its 95%, 70%, 50% fermented ethyl alcohol and water extracts. Additionally, the effects of heat and pH treatments on the antioxidant properties of the extracts were evaluated by their TPC and 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical scavenging capabilities. The yields of the extracts were greatest in the order of water > 50% > 70% > 95% fermented ethyl alcohol, and the TPC of the 70% (26.18%) and 50% fermented ethyl alcohol (27.56%) extracts were higher than those of the others. However, in terms of DPPH radical scavenging and ferrous-reducing power, the 70% fermented ethyl alcohol extract of Ishige okamurai showed the highest antioxidant effects. Additionally, in the results for the heat and pH treatments, the antioxidant properties of the 70% fermented ethyl alcohol extract were not influenced by the treatment conditions except at pH 10.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.126-135
• /
• 2002

Plate bonding technique has been widely used in strengthening of existing concrete structures, although it has often a serious problem of premature falure such as interface separation and rip-off. However, this premature failure problem has not been well explored yet especially in view of local failure mechanism around the interface of plate ends. The purpose of the present study is, therefore, to identify the local failure of strengthened plates and to derive a separation criterion at the interface of plates. To this end, a comprehensive experimental program has been set up. The double lap pull-out tests considering pure shear force and half beam tests considering combined flexure-shear force were performed. The main experimental parameters include plate thickness, adhesive thickness, and plate end arrangement. The strains along the longitudinal direction of steel plates have been measured and the shear stress were calculated from those measures strains. The effects of plate thickness, bonded length, and plate end treatment have been also clarified from the present test results. Nonlinear finite element analysis has been performed and compared with test results. The Interface properties are also modeled to present the separation failure behavior of strengthened members. The cracking patterns as well as maximum failure loads agree well with test data. The relation between maximum shear and normal stresses at the interface has been derived to propose a separation failure criterion of strengthened members. The present study allows more realistic analysis and design of externally strengthened flexural member with steel plates.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.585-591
• /
• 2006

We measured the litterfall quantity and investigated the nutrient dynamics in decomposing litter for three years at the LTER sites installed in a deciduous broadleaf natural forest in Mt. Gyebangsan, South Korea. Litterfall production was significantly different among the sampling dates, whereas it was not significantly different among the years. The total annual mean litterfall production for three years was 6,593 kg $ha^{-1}$ $yr^{-1}$ and leaf litter accounted for 82.6% of the litterfall. The leaf litter quantity was highest in Quercus mongolia, followed by leaf of other species, Betula schmidtii, Kaplopanax pictus, Acer pseudo-sieboldianum, etc., which are dominant tree species in the site. The mass loss from the decomposition of leaf litter was fastest in Cortinus controversa (100%), followed by A. preudo-sieboldianum, K. pictus, and B. schmidtii. 100% of litter for C. controversa, 96.1% for A. pseudo-sieboldianum, 92.8% for K. pictus decomposed, while 66.2% of litter for Q. mongolia decayed for 1,003 days. The lower rate of the mass loss in the litter of Q. mongolia may be attributed to the difference in substrate quality, such as lower nutrient concentrations compared with those of other tree species. The concentrations of N, P, and Ca for five litter types increased over time, while the concentrations of K and Mg decreased over time. Compared with the nutrients in the litter of Q. mongolia, the nutrients (N, P, K, Ca, Mg) in the litter of other species, C. controversa, A. pseudo-sieboldianum, and K. pictus, were released more rapidly. The results showed that the mass loss and the nutrient dynamics in the litter are variable depending on the tree species even in the same site conditions.

• Journal of Gastric Cancer
• /
• v.7 no.3
• /
• pp.167-173
• /
• 2007

Purpose: Mistletoe (Viscum album L.) extract is one of the most widely used agents in alternative cancer therapeutic regimens in Europe. This study was conducted to determine the effect of mistletoe extract on immune function in gastric cancer patients. Materials and Methods: Ten patients that had undergone a curative gastrectomy were enrolled in the prospective study. ABNOBAviscum $Q^{(R)}$ was injected subcutaneously three times a week from postoperative-day 7 to week 16 with an increasing dose. All of the patients simultaneously received chemotheraphy with mitomycin, oral 5-FU and a cisplatin regimen. The WBC count, differential count, lymphocyte/WBC ratio and the level of cytokines (IL-$1{\beta}$, IL-2, IL-6, IFN-$\gamma$, TNF-$\alpha$) were checked in the peripheral blood preoperatively, at postoperative week 8 and at postoperative week 16. Results: The WBC and neutrophil counts significantly decreased after treatment on week 8 and week 16 (P=0.001), but the total eosinophil count was slightly increased (P=0.15). The total lymphocyte count also decreased during treatment but the lymphocyte/WBC ratio was slightly increased without statistical significance (P=0.91). The cytokine levels did not significantly change during treatment. Conclusion: It is somewhat difficult to determine the direct effect of mistletoe therapy on immune function as the effect may be compromised by the concurrent chemotherapy. It can be assumed that the slightly increased lymphocyte/WBC ratio and eosinophil count may be a result of the immunomodulatory effect of the mistletoe extract.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.322-326
• /
• 2012

Recently, researches related to plant factory system has been activated and production of Ssam-vegetables using artificial lighting has been increasing. In South Korea, Ssam-vegetables are very popular and the consumption is increasing every year. Because leaf vegetables cultivated under hydroponic systems are more preferable rather than those cultivated by soil culture in Korea, the plant factory system would be more effective in production of Ssam-vegetables. Therefore, this study was carried out in order to analyze the yield and vitamin C contents in red mustard (Brassica juncea L.) and pak-choi (Brassica campestris var. chinensis), which are used a lot for the Ssam-vegetables in South Korea, as influenced by different concentrations of the nutrient solution in a plant factory system. As a results, there was no significant differences in the plant height among the treatment of EC in the nutrient solution, but for red mustard plants, the number of leaves tended to decrease in the treatment with higher EC. Leaf area of pak-choi plants was significantly increased in the higher EC, while the fresh weight had a tendency to increase along with increasing EC in the nutrient solution for both crops. The photosynthetic rates did not show a distinct tendency by EC levels for red mustard plants, but for pak-choi plants, it tended to be higher at the high EC. The contents of ascorbic acid in leaves were higher with decreasing EC concentration in the nutrient solution for red mustard plants, while the content was the highest at EC $2.0dS{\cdot}m^{-1}$ for pak-choi plants. In summary, considering the marketable yields and vitamin C at different nutrient concentrations in a plant factory, the optimal concentration for red mustard and pak-choi plants was thought to be EC $2.0{\sim}2.5dS{\cdot}m^{-1}$.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.2
• /
• pp.111-119
• /
• 1999

Purpose: As mesial temporal lobe epilepsy (TLE) shows hypometabolism of medial and lateral temporal lobe, we investigated whether symmetric uptake of F-18-FDG in medial temporal lobes can differentiate mesial from lateral TLE. Materials and Methods: In 113 patients (83 mesial TLE, 30 lateral TLE) who underwent anterior temporal lobectomy and/or corticectomy with good surgical outcome, we performed F-18-FDG PET and compared F-18-FDG uptake of medial and lateral temporal lobes. All the patients with mesial TLE had hippocampal sclerosis except one congenital abnormal hippocampus. Patients with lateral TLE revealed cerebromalacia, microdysgenesis, arteriovenous malformation, old contusion, and cortical dysplasia. Results: Sensitivity of F-18-FDG PET and MR for mesial TLE was 84% (70/83) and 73% (61/83), respectively. Sensitivity of F-18-FDG PET and MR for lateral TLE was 90% (27/30) and 66% (20/30), respectively. Twelve patients were normal on F-18-FDG PET. 101 patients had hypometabotism of lateral temporal lobe. Among 88 patients who showed hypometabolism of medial temporal lobe as well as lateral temporal lobe, 70 were mesial TLE patients and 18 were lateral TLE on pathologic examination. Positive predictive value of medial temporal hypometabolism for mesial TLE was 80%. Among 13 patients who showed hypometabolism of only lateral temporal lobe, 4 were mesial TLE and 9 were lateral TLE. Positive predictive value of hypometabolism of lateral temporal lobe for the diagnosis of lateral TLE was 69% (9/13). Normal MR findings stood against medial TLE, whose negative predictive value was 66%. Conclusion: Lateral temporal lobe epilepsy should be suspected when there is decreased F-18-FDG uptake in lateral temporal lobe with normal uptake in medial temporal lobe.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.2
• /
• pp.131-142
• /
• 1999

Purpose: Either gated myocardial perfusion SPECT or attenuation corrected SPECT can be used to improve specificity in the diagnosis of coronary artery disease. We investigated in this study whether gating or attenuation correction improved diagnostic performance of rest/stress perfusion SPECT in patients having intermediate pre-test likelihood of coronary artery disease. Materials and Methods: Sixty-eight patients underwent rest attenuation-corrected T1-20l/dipyridamole stress gated attenuation-corrected Tc-99m -MIBI SPECT using an ADAC vertex camera (M:F=29:39, aged $59{\pm}12$ years, coronary artery stenosis ${\geq}70%$, one vessel: 13, two vessel: 18, three vessel: 8, normal: 29). Using a five-point scale, three physicians graded the post-test likelihood of coronary artery disease for each arterial territory (1:normal, 2: possibly normal, 3:equivocal, 4. possibly abnormal, 5: abnormal). Sensitivity, specificity and area under receiver-operating-characteristic curves were compared for each operator between three methods : (A) non-attenuation-corrected SPECT; (B) gated SPECT added to (A): and (C) attenuation-corrected SPECT added to (B). Results: When grade 3 was used as the criteria for coronary artery disease, no differences in sensitivity and specificity were found between the three methods for each operator. Areas under receiver-operating-characteristic curves for diagnosis of coronary artery disease revealed no differences between each modality (p>0.05). Conclusion: In patients at intermediate risk of coronary artery disease, gated SPECT and attenuation- corrected SPECT did not improve diagnostic performance.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.706-713
• /
• 2012

This study was carried out to investigate the contents of monacolin K and citrinin, along with the sensory quality and antioxidant activity of mulberry leaf tea fermented by $Monascus$ $pilsous$ (FMM). Total monacolin K content of FMM was 0.058%, but citrinin was not detected. Redness of brewed FMM was remarkably higher than that of unfermented mulberry leaf tea (UFM). In sensory evaluation of brewed FMM, while astringent taste and savory taste were lower, flavor, color, and overall acceptability were significantly higher than those of UFM. Total polyphenol contents of UFM and FMM were 83.1 and 23.61 mg/g (dry basis), total flavonoid contents of UFM and FMM were 17.96 and 3.99 mg/g (dry basis), respectively. Xanthine oxidase (XO) inhibitory activity and superoxide dismutase (SOD)-like activity of FMM were lower than those of UFM. Electron-donating ability and ferric-reducing antioxidant power of FMM were slightly lower than those of UFM. However, the antioxidant activities of FMM per polyphenol content were markedly higher than those of UFM. These results suggest that FMM may scavenge excessive reactive oxygen spices (ROS) via inhibition of XO and SOD-like activity. Furthermore, FMM demonstrated relatively higher acceptability and antioxidant ability along with functionality of $Hongguk$ (red yeast rice), and therefore could be utilized to prevent various ROS-induced diseases.