• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.130-136
• /
• 2002

A novel ozonizer has been developed using a high frequency surface discharge and a high purity Ti-Si-Al ceramic catalyst as its dielectric component. A cylindrical thin compound ceramic catalyst in reactor is adhered to inside of the film-like outside electrode. And, when experiment condition are oxygen gas temperature of 20 ［$^{\circ}C$］, inner reactor pressure of 1.6 atm 600［Hz］ and flow late of 2［l/min］. the ozonizer can easily produce ozone concentration(50～60［g/㎥］for oxygen) and power efficiency(180［g/kWh］for oxygen) without using a special enrichment means. At 2［l/min］, 20［$^{\circ}C$］, 1.6［atm］, 600［Hz］and 40［W］, the result of simulation to gas temperature of reactor using general code Phoenics, the maximum temperature of reactor was 132［$^{\circ}C$］in reactor. Ant the result electric field simulation of Ti-Si-Al type reactor using general code Flux 2D, maximum electric field was 0.131E.08［V/m］.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.593-602
• /
• 2018

The purpose of this study was to investigate the coloring properties of non-mordant dyes by examining local literature on silk fabric dyeing using red-colored natural dyes. Natural dyes can be prepared from the following 8 materials: purple-fleshed sweet potato, Impatiens balsamina, mulberry, fruits of Ligustrum japonicum Thunb, guava leaves, dansam, hibiscus flowers, and pruned branches of Prunus persica. To examine the surface color calculated $L^*$, $a^*$, $b^*$, ${\Delta}E^*$, and K/S value and H V/C. The variables considered in the dyeing experiment were dye concentration, dyeing temperature, dyeing time, and number of dyeing iterations, which were varied to evaluate the dyeing properties and color characteristics. As a result, the abovementioned variables, dye affinity, and red color expression were directly proportional to one another. In this study, it was found that red coloring can be obtained with natural dyes; moreover, excellent dyeing was achieved without the need for repeated dyeing or mordanting processes, which cause environmental pollution.

• Mass Spectrometry Letters
• /
• v.11 no.4
• /
• pp.71-76
• /
• 2020

While montelukast (ML), a cysteinyl-leukotriene type 1 receptor (CysLT1) antagonist is widely used to treat symptoms of rhinitis or asthma, its formulations are mainly limited to solid preparation due to its instability. Recently, there have been attempts to develop various ML dosage forms, and this situation increases the demand of sensitive and creditable methods to determine ML in various samples such as plasma. Thus, here, a simple and efficient method to determine ML in rat plasma using liquid-liquid extraction (LLE) and multiple reaction monitoring was presented. The mixture of DCM:EtOAc (25:75, v/v), the optimized extract solvent for LLE was found to be effective to extract ML without hydrophilic salts and proteins from the sample with limited volume. Also, the use of zafirlukast, instead of expensive ML-d6, as the internal standard makes the present method economical. The developed method was successfully validated in terms of selectivity, matrix effects (-14.8--6.9%), linearity (r230.998 within 0.5-500 ng/mL), sensitivity (the limit of detection and the lower limit of quantitation, ≤0.5 ng/mL), accuracy (88.4-100.6%), precision (3.0-13.3%), and recovery (80.8-86.3%) by following the FDA guidelines. Finally, the applicability of the validated method to pharmacokinetics (PK) studies was confirmed by the successful determination of PK parameters through it following oral administration of Singulair® granule in rats. Therefore, the present method can contribute to the development of new ML formulations through its performance to determine ML in rat plasma efficiently and sensitively.

• Journal of Veterinary Science
• /
• v.21 no.3
• /
• pp.35.1-35.11
• /
• 2020

Background: Despite common use of tylosin in turkeys, the pharmacokinetic (PK) data for this drug in turkeys is limited. Within a few months of growth, PK of drugs in turkeys undergoes changes that may decrease their efficacy due to variable internal exposure. Objectives: The objective of this study was to investigate the influence of age on the PK of a single intravenous (i.v.) and oral administration of tylosin to turkeys at a dose of 10 and 50 mg/kg, respectively. Methods: Plasma drug concentrations were measured using high-performance liquid chromatography with UV detection. The PK parameters were assessed by means of non-compartmental approach and were subjected to allometric analysis. Results: During a 2.5-month-long period of growth from 1.4 to 14.7 kg, the median value for area under the concentration-time curve after i.v. administration increased from 2.61 to 7.15 mg × h/L and the body clearance decreased from a median of 3.81 to 1.42 L/h/kg. Over the same time, the median elimination half-life increased from 1.03 to 2.96 h. For the oral administration a similar trend was noted but the differences were less pronounced. Bioavailability was variable (5.76%-21.59%) and age-independent. For both routes, the plasma concentration of the major tylosin metabolite, tylosin D, was minimal. Protein binding was age-independent and did not exceed 50%. Allometric analysis indicated a relatively poor predictivity of clearance, volume of distribution and elimination half-life for tylosin in turkeys. Conclusions: Age has a significant impact on tylosin PK in turkeys and dosage adjustment may be needed, particularly in young individuals.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.8
• /
• pp.1392-1400
• /
• 2017

Galactooligosaccharides (GOSs) are known to be selectively utilized by Bifidobacterium, which can bring about healthy changes of the composition of intestinal microflora. In this study, ${\beta}-GOS$ were synthesized using bifidobacterial ${\beta}-galactosidase$ (G1) purified from recombinant E. coli with a high GOS yield and with high productivity and enhanced bifidogenic activity. The purified recombinant G1 showed maximum production of ${\beta}-GOSs$ at pH 8.5 and $45^{\circ}C$. A matrix-assisted laser desorption ionization time-of-flight mass spectrometry analysis of the major peaks of the produced ${\beta}-GOSs$ showed MW of 527 and 689, indicating the synthesis of ${\beta}-GOSs$ at degrees of polymerization (DP) of 3 and DP4, respectively. The trisaccharides were identified as ${\beta}-{\text\tiny{D}}$-galactopyranosyl-($1{\rightarrow}4$)-O-${\beta}-{\text\tiny{D}}$-galactopyranosyl-($1{\rightarrow}4$)-O-${\beta}-{\text\tiny{D}}$-glucopyranose, and the tetrasaccharides were identified as ${\beta}-{\text\tiny{D}}$-galactopyranosyl-($1{\rightarrow}4$)-O-${\beta}-{\text\tiny{D}}$-galactopyranosyl-($1{\rightarrow}4$)-O-${\beta}-{\text\tiny{D}}$-galactopyranosyl-($1{\rightarrow}4$)-O-${\beta}-{\text\tiny{D}}$-glucopyranose. The maximal production yield of GOSs was as high as 25.3% (w/v) using purified recombinant ${\beta}-galactosidase$ and 36% (w/v) of lactose as a substrate at pH 8.5 and $45^{\circ}C$. After 140 min of the reaction under this condition, 268.3 g/l of GOSs was obtained. With regard to the prebiotic effect, all of the tested Bifidobacterium except for B. breve grew well in BHI medium containing ${\beta}-GOS$ as a sole carbon source, whereas lactobacilli and Streptococcus thermophilus scarcely grew in the same medium. Only Bacteroides fragilis, Clostridium ramosum, and Enterobacter cloacae among the 17 pathogens tested grew in BHI medium containing ${\beta}-GOS$ as a sole carbon source; the remaining pathogens did not grow in the same medium. Consequently, the ${\beta}-GOS$ are expected to contribute to the beneficial change of intestinal microbial flora.

• Korean Journal of Weed Science
• /
• v.5 no.2
• /
• pp.96-102
• /
• 1985

A study on the competition-ecological classification of the 10 prominent paddy weed species around bulrush (Scirpus juneoides) to simplify the weed problem concept for the rice production. A serial assessments on the competition ability in space and dry matter production(nutrient depletion) of respective weed species and paddy rice, and the data were used to compute the phenotypic similarity by Single Link Clustering method. Both growth response of weed species in mono- and under the paddy rice standing was very similar (r = 0.969), but the reduction rate as affected by paddy rice standing was negatively correlated with the ability in space-competition(r=-0.513). Dendrogram of 10 weed species based on the phenotypic similarity computed in 4 characters in mono- and under the paddy rice standing was also similar, as Echinochloa c., Ludwigia p., Cyperus s., and Scirpus m. in I-group, Eleocharis k., Scirpus j, in II-group, and Juncus e., Potamogeton d. in III-group, respectively. Also, that of paddy rice to 10 weed species showed Fimbristylis m., Scirpus j., Eleocharis k., Scirpus m., Juncus e. in I-group, and Ludwigia p., Potamogeton d., Monochoria v. in II-group, respectively. The integrated dendrogram by the above two data indicate the I-group with Fimbristylis m., Scirpus j., Eleocharis k. and Juncus e., as higher growth response with relatively lower competition ability to paddy rice, II-group with Cyperus s., Echinochloa c., Potamogeton d., and Ludwigia p., as higher both in growth and competition, and the last, III-group with Monochoria v., and Scirpus m., as lower growth but higher competition, respectively.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.52-57
• /
• 1998

The objective of this study was to investigate the effect of cow manure as additive material on the ripening of sewage s sludge for vermistabiJization. The changes of the waste properties by ripening for 50days were observed as a function of the v various mixture ratios of sewage sludge ‘and cow manure. The pH values of the mixture wastes decreased from 7.5-7.67 to 6_ 9~7.2 by the ripening for 50days, and the mixture ratio made dIfferent pH values. The initial value of oxidation-reduction p potential (Eh) of the mixture waste was a negative (-) value indicating an unfavorable condition for earthworm after, but the v values of Eh increased with the opening time. The Increase rate at Eh value was prop$\alpha$rtional to the mixture ratio of cow m manure. The value of alkalinity was also changed into the favorable range for earthworm after 50days except for non-use of 1 the cow manure When the mixture ratio of the cow manure increased from 10% to 30%, the growth of earthworms increased h from 63.7% to 88.3 % tor the survival rate, 265% to 321% for the liveweight increasing rate and 66.7_7% to 91% for hatching f rate of the cocoons. It can be concluded that the proper content of tbe cow manure in the sewage sludge to ensure effective v vermistabilization was over 20%, when the mixture was ripened during 50 days. The quantity of ingestion and 며ectian at 20%-30% was found to be O.15--i.L18g sludge and 0 1l--O.14g solid per capacity earthworm per day, respectively.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.631-636
• /
• 2002

Lethality of high intensity light pulse on the pre-determined microbial populations has been investigated. Prior to the treatment, Lactobacillus plantarum, Lactobacillus brevis, Leuconostoc mesenteroides and Pediococcus pentosaceus were cultivated separately onto the surface of Lactobacilli MRS agar. Pre-determined microbial populations were applied to the test media and these sample were exposed to high intense light source with an exposure time ranging from 1 to $2500\;{\mu}s$. Results showed that at least 200 light pulses of $1\;{\mu}s$ duration were required to reduce L. Plantarum cells by 90% at 25 kV, the greater the number of light pulses, the larger the reduction in viable cell numbers. Viable cells of L. plantarum and the others were reduced by more than 5 and 6 log cycles at the upper exposure level of $750\;{\mu}s$, respectively. These study shows that pulsed light emissions can significantly reduce populations of lactic acid bacteria on exposed surface with exposure times. Killing efficiency for L. plantarum significantly increased with decreasing the distance between the lamp and the surface of samples.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.620-627
• /
• 2008

STATEMENT OF PROBLEM: A biochemical approach for surface modification has offered an alternative for physicochemical and morphological methods to obtain desirable bone-implant interfaces. PURPOSE: The purpose of the present study was to investigate cell responses to poly (D,L-lactide-co-glycolide) (PLGA)/$1{\alpha}$,25-(OH)$_2D_3$ coating with reference to cellular proliferation and differentiation in vitro. MATERIAL AND METHODS: 96 titanium discs were fabricated and divided into four groups. Group 1 was anodized under 300 V as control. Group 2, 3 and 4 were anodized then coated with 3 ml PLGA/$1{\alpha}$,25-(OH)$_2D_3$ solutions. Amount of the solutions were 2 ul, 20 ul and 200ul respectively. The osteoblast-like Human Osteogenic Sarcoma (HOS) cells were seeded and cultured for 1, 3 and 7 days. MTSbased cell proliferation assay and ALPase activity test were carried out. RESULTS: PLGA nanoparticles were observed as fine, smooth and round and HOS cells attached to the anodized surfaces through strand-like and sheet-like filopodia. After 3 days of culture, the dendritic filopodia were exaggerated and sheet-like cytoplasmic projections covered the coated titanium surfaces. After 3 days of culture, all of the groups showed increased cellular proliferation and the lowest proliferation rate was measured on group 2. Higher amount of incorporated $1{\alpha}$,25-(OH)$_2D_3$ (Group 3 and 4) improved cellular proliferation but the differences were not significant statistically (P > .05). But they increased the rate of ALP activities than the control group at day 3 (P < .05). CONCLUSION: Biodegradable PLGA nanoparticles incorporated with vitamin D metabolite positively affected proliferation and differentiation of cells on the anodized titanium surface.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.318-324
• /
• 2004

Purpose: Philips GEMINI is a newly introduced whole-body GSO PET/CT scanner. In this study, performance of the scanner including spatial resolution, sensitivity, scatter fraction, noise equivalent count ratio (NECR) was measured utilizing NEMA NU2-2001 standard protocol and compared with performance of LSO, BGO crystal scanner. Methods: GEMINI is composed of the Philips ALLEGRO PET and MX8000 D multi-slice CT scanners. The PET scanner has 28 detector segments which have an array of 29 by 22 GSO crystals ($4{\times}6{\times}20$ mm), covering axial FOV of 18 cm. PET data to measure spatial resolution, sensitivity, scatter fraction, and NECR were acquired in 3D mode according to the NEMA NU2 protocols (coincidence window: 8 ns, energy window: $409[\sim}664$ keV). For the measurement of spatial resolution, images were reconstructed with FBP using ramp filter and an iterative reconstruction algorithm, 3D RAMLA. Data for sensitivity measurement were acquired using NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves after we confirmed that dead time loss did not exceed 1%. To measure NECR and scatter fraction, 1110 MBq of F-18 solution was injected into a NEMA scatter phantom with a length of 70 cm and dynamic scan with 20-min frame duration was acquired for 7 half-lives. Oblique sinograms were collapsed into transaxial slices using single slice rebinning method, and true to background (scatter+random) ratio for each slice and frame was estimated. Scatter fraction was determined by averaging the true to background ratio of last 3 frames in which the dead time loss was below 1%. Results: Transverse and axial resolutions at 1cm radius were (1) 5.3 and 6.5 mm (FBP), (2) 5.1 and 5.9 mm (3D RAMLA). Transverse radial, transverse tangential, and axial resolution at 10 cm were (1) 5.7, 5.7, and 7.0 mm (FBP), (2) 5.4, 5.4, and 6.4 mm (3D RAMLA). Attenuation free values of sensitivity were 3,620 counts/sec/MBq at the center of transaxial FOV and 4,324 counts/sec/MBq at 10 cm offset from the center. Scatter fraction was 40.6%, and peak true count rate and NECR were 88.9 kcps @ 12.9 kBq/mL and 34.3 kcps @ 8.84 kBq/mL. These characteristics are better than that of ECAT EXACT PET scanner with BGO crystal. Conclusion: The results of this field test demonstrate high resolution, sensitivity and count rate performance of the 3D PET/CT scanner with GSO crystal. The data provided here will be useful for the comparative study with other 3D PET/CT scanners using BGO or LSO crystals.