• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.57-63
• /
• 2012

The purpose of this study is to evaluate the welding distortion of the circular type lap joint in STS304L of 0.7mm thickness by using FEA. In order to do it, a heat input model for GTA welding process with non-consumable electrode was established through comparing the molten pool shapes and temperature distributions obtained by both FEA and experiment. With the heat input model, the welding distortion of the circular type lap joint was evaluated by 3-D FEA. From FEA results, it was found that 3-D FEA with proper heat input model can be used for the evaluation of the excessive distortion of the circular type lap joint of STS304L thin plate. In addition, the root cause of the excessive distortion in the weld was also identified as the excessive compressive residual stress in the tangential direction of the weld.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.829-850
• /
• 2012

In this paper, we adopt symmetric interior penalty discontinuous Galerkin (SIPG) methods to approximate the solution of nonlinear viscoelasticity-type equations. We construct finite element space which consists of piecewise continuous polynomials. We introduce an appropriate elliptic-type projection and prove its approximation properties. We construct semidiscrete discontinuous Galerkin approximations and prove the optimal convergence in $L^2$ normed space.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.2
• /
• pp.387-400
• /
• 2014

We prove that the set of k-type nonwandering points of a Z2-action T can be decomposed into a disjoint union of closed and T-invariant sets $B_1,{\ldots},B_l$ such that $T|B_i$ is topologically k-type transitive for each $i=1,2,{\ldots},l$, if T is expansive and has the shadowing property.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.30-30
• /
• 2023

한국산 체꽃속(Scabiosa L.)의 외부형태형질을 바탕으로 구분한 5가지 변이 유형[솔체꽃(S. comosa) Type 1-2, 체꽃(S. tschiliensis f. pinnata) Type 3-4, 구름체꽃(S. tschiliensis f. alpina) Type 5]에 대해 잎 표피와 화분의 미세구조를 관찰하였다. 잎 표피세포의 크기는 향축면은 평균 12.4 × 6.7 ㎛로, Type 1이 가장 작고 Type 3가 가장 컸으며, 배축면은 평균 9.4 × 4.6 ㎛로 모든 유형이 비슷하게 나타났다. 모용은 단세포성 선상 모용이 일부 유형에서, 다세포성 비선상 모용이 모든 유형에서 관찰되었다. 선상 모용은 향축면에서 Type 1과 5에만 있었으며, 두 유형 중 Type 5의 모용이 길이 72.2 ㎛로 더 길고, 단위면적 (0.01 mm²) 당 개수도 5개로 더 많았다. 배축면에서는 Type 1, 3 및 5에 있고, 단위면적 당 개수가 Type 1과 5는 3~6개로 비슷하였으나, Type 3은 1개 이하로 매우 드물게 나타났다. 기공복합체는 부등형으로 양면에 분포하며, 향축면의 공변세포 크기는 평균 4.4 × 2.7 ㎛로 너비는 유사하나 길이는 Type 1과 5가 3.1 ㎛, 3.9 ㎛로 나머지에 비해 작았다. 단위면적 당 기공의 수는 향축면과 배축면이 평균 40.2개, 149.2개이고, 양면 모두 Type 1이 66.3개와 177.2개로 가장 많았다. 화분은 모두 단립으로 삼구형이고, 극축 길이(P)와 적도면 지름(E)의 비율은 0.83~1.12로 모양은 아단구형~약장구형이다. 표면무늬는 과립상 표면에 자상 돌기가 있고, Type 3과 4에서만 유공상이 확인되었다. 이상의 결과에서, 솔체꽃 유형인 Type 1과 2가 잎 표면의 선상 모용 유무 및 기공의 수에 뚜렷한 차이를 보여 Type 1은 솔체꽃과는 다른 새로운 변종 또는 품종일 가능성이 있다고 생각된다. 또한 체꽃 유형인 Type 3과 4의 경우, Type 3의 잎 배축면에 털이 드물게 있으나, 두 유형의 화분 표면무늬가 동일하고, 다른 형질들도 모두 중복되어 연속적인 변이로 보이며, 구름체꽃 유형인 Type 5는 나머지 유형과 뚜렷이 구분되었다.

• Microbiology and Biotechnology Letters
• /
• v.5 no.1
• /
• pp.13-17
• /
• 1977

We isolated lactobacillus phage hosting L. casei strains, and examined distribution of the phages and resistance to the sanitary reagent treatment in drainages fo Korea plant. 1) There were Type 1, 11, 111, and 1v of the phage J$_1$in plantdrainages and the order of distribution was Type 1v>Type 11>Type 1>$^1$Type 111. 2) All the phages in plantdrainages were completely removed by spreading the invert soap. 3) Sodium hypochloride, invert soap and dresol were most effective sanitary reagents, and isopropyl alcohol and ethyl alcohol were sanitary reagents.

• The Plant Pathology Journal
• /
• v.15 no.1
• /
• pp.38-43
• /
• 1999

Mutants of the monopartite geminivirus beet curly top virus (BCTV) have been screened for infectivity, systemic movement, replication and symptom development in Arabidopsis thaliana. As known by coding for coat protein, R1 mutant was not infectious and did not move systemically. R2, R3 and L2/L3 mutants produced milder symptoms compared to wild type BCTV but the infectivity was reduced by 40% to 60%. R2 ORF is thought to be involved in the regulation of ssDNA and dsDNA accumulation because only dsDNA was accumulated on R2-infected organs. Disruption of ORF L4 resulted in reduced infections, but the viral DNA was accumulated in infected organs from roots to shoot tips as much as wild type BCTV on Sei-O. In addition, 4 mutants did not produce callus-like tissues on infected organs, suggesting that L4 ORF may play a role in the induction of host cell divisions by virus infection. This result was supported by the patterns of mRNA expression and promoter analysis of the cell cycle marker gene, cycl, on Arabidopsis. cycl mRNA was accumulated on symptomatic organs by wild type BCTV infections but not by L4 mutant. We conclude that the BCTV L4 ORF is essential for symptom developments, specially callus-like formation on infected organs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1406-1411
• /
• 2005

The creep rupture data for type 316LN stainless steels were collected through literature survey or experimental data produced in KAERI. Using these data, polynomial equations for predicting creep life were obtained by Larson-Miller (L-M), Orr-Sherby-Dorn (O-S-D) and Manson-Haferd (M-H) etc. time-temperature parametric (TTP) methods. Standard error of estimate (SEE) values for the each parameter was obtained with different temperatures through the statistical process of the creep data. The results of L-M, O-S-D and M-H methods showed good creep-life prediction, but M-H method showed better agreement than L-M and O-S-D methods. Especially, it was found that SEE values of M-H method at $700^{\circ}C$ were lower than that of L-M and O-S-D methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.74-80
• /
• 2005

A number of creep rupture data for type 316LN stainless steels were collected through literature survey or experimental data produced in KAERI. Using these data, polynomial equations for predicting creep life were obtained by Larson-Miller (L-M), Orr-Sherby-Dorn (O-S-D) and Manson-Haferd (M-H) parameters using time-temperature parametric (TTP) methods. Standard error of estimate (SEE) values for the each parameter was obtained with different temperatures through the statistical process of the creep data. The results of L-M, O-S-D and M-H methods showed good creep-life prediction, but M-H method showed better agreement than L-M and O-S-D methods. Especially, it was found that SEE values of M-H method at $700^{\circ}C$ were lower than that of L-M and O-S-D methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.29-35
• /
• 2002

This study was carried out to investigate the characteristics of shattering habit and germination of offtype rice plants collected in Korea which were classified into seven groups based on grain characteristics. In the long-grain red rice group, the short-grain red rice group, the long-grain normal rice group, and the long-grain waxy rice group, the tensile strength of grain and primary rachis branch was relatively low and the fiber cell of the primary rachis branch was short. Characteristics of shattering-related traits and germination in relation to grain and esterase isozyme zymogram type of off-type rice plants. In most lines of the extremely late and sterile rice group, the tensile strength of grain was low, while that of primary rachis branch was high, and the fiber cell was long. However, in the type 1 esterase isozyme zymogram(EIZ) lines among the long-grain normal rice group and the type 6 and 5+6 EIZ plants among the extremely late and sterile rice group, the tensile strength of grain was relatively higher. The long-grain waxy rice group and the type 3 EIZ lines among the long-grain red rice group, showed higher germinability than did cultivars which are known to germinate well even in low-temperature. The other off-type rice group, except for the short-grain waxy rice group and type 1 and 7 EIZ lines among the long-grain normal rice group, had higher germination speed than that of the cultivars.

• The Korean Journal of Zoology
• /
• v.37 no.1
• /
• pp.49-57
• /
• 1994

In the course of an investigation on the morphological variation of Korean striped bittering, Acheilognathus vamatsutae Mori, two kinds of morrholoflical types were found. Some morphological characters were compared between them and multivariate analysis was conducted. Since the difference of the barbel length between them was very significant (p < 0.01,1-test), they should be designated as L-and 5-type Hshes: fishes with long barbels and those with should barbels, respectively. Lateral line scales, snout length and prepectoral length showed a tendency that the observation could be distinguished from each other (p < 0.05, Duncan's multiple range tests. There were no individuals over 70 mm BL in S-type and so S-type fishes were somewhat dwarf than L-type fishes. The two types were also clearly distinguished by multivariate analyses using cluster and discriminant analyses. According to the observation on the four populations of the Naktong River, the blue-green stripe on the body side and the white band on the margin of anal fin in males of S-type fishes were well developed through the year but those of males of L-type fishes completely disappeared or became slender during nonbreedins season as that of females. Of the seven localities surveved, there were no places that the two types cohabit. S-type fishes are limited only in the Kumho and Wichon River of the Naktong River system but L-type fishes are distributed more widely In the Hongchon, Mangvons, Somjin, Mirang and Panbyon River.