• 한국수자원학회논문집
• /
• 제55권12호
• /
• pp.1125-1135
• /
• 2022

적설에 의한 피해는 자주 발생하지 않지만 발생하면 광범위한 지역에 피해를 준다. 적설에 의한 피해를 예방하기 위해서는 지역별로 피해를 유발하는 적설심을 미리 파악해 둘 필요가 있다. 하지만 관측하고 있는 적설심은 특정 관측지점으로 한정되어 피해를 유발하는 지역별 피해유발적설심을 파악하는데 어려움이 있다. 이를 극복하기 위한 일반적인 방법은 관측지점의 적설을 보간하여 공간적으로 확대하는 것이다. 하지만 이것은 매우 적은 자료를 가지고 고도 등 지형적인 특성이 다른 넓은 영역을 통계적으로 추론해야 하는 한계로 인해 지역에 대한 피해유발 피해유발적설심의 구명에 더 혼란을 주기도 한다. 이를 보완하기 위해서는 넓은 영역을 관측하는 위성영상을 활용할 수 있으며, 그 중에서도 합성개구레이더(Synthetic Aperture Radar; SAR)를 이용한 위상차분 간섭기법(DInSAR)을 활용할 수 있다. 위상간섭영상은 두 개의 다른 시기에 측정된 합성개구레이더 영상의 위상간섭을 이용한 것으로 일반적으로 미세한 지형의 변화를 추적할 때 사용되기도 한다. 본 연구에서는 유럽우주국(ESA)에서 운영하는 Sentinel-1B 위성의 dual polarimetric IW 모드 C-band SAR 데이터를 사용하여 DInSAR 분석을 수행하여 적설심의 공간분포를 추정하였다. 또한 정지궤도복합위성 천리안 2호(GK-2A)의 L2 적설심 추정 자료를 이용하여 비교하였다. 적용 결과, 적설예측의 정확도는 격자별로 계산할 경우, DInSAR 는 약 0.92%, GK-2A 는 약 0.71% 를 나타내 DInSAR의 적용성이 높게 나타났다. 즉, DInSAR 방법을 이용하여 계산된 적설심과 기상관측소에서 관측된 적설심을 공간보간하여 비교한 결과, 적설의 분석 결과 적설심을 과대추정하는 경우가 발생하기는 했으나, 적설심의 공간분포를 추정하는데 충분한 정보를 제공했으며, 이러한 방법으로 파악된 적설심의 공간분포는 실제 피해발생지역의 적설심을 보다 정확하게 추정하는데 기여할 수 있으며, 이것은 지역별 피해유발적설심을 파악하는데 도움이 될 것이다.

• 한국작물학회지
• /
• 제68권4호
• /
• pp.335-342
• /
• 2023

벼, 콩, 옥수수와 밀을 이모작하여 작부체계가 경질밀인 금강밀과 조경밀의 생육 및 품질에 어떤 영향을 미치는지에 대하여 조사하였다. 1. 밀 이모작에서 하작물에 의한 밀의 생육기 및 수량 차이는 나타나지 않았으나 경장에 유의한 차이를 나타내었고, 경장은 벼와의 작부체계에서 가장 컸으나, 경장이 밀품질에는 영향을 미치지 않았다.. 2. 밀 품질 요소들 중 단백질함량은 콩을 심은 후 재배한 밀에서 가장 컸으며, 품종에 따라 단백질함량의 증감 정도에 차이가 있었다. 품종특성으로 비교했을 때 상대적으로 단백질 함량이 적은 조경밀이 상대적으로 단백질 함량이 많은 금강밀보다 콩과의 작부체계에 의한 단백질 함량 증가가 크게 나타났다. 3. 작부체계에 따른 토양 중량수분함량에 차이가 있었으며, 밭 상태로 작부체계를 하는 콩과 옥수수의 경우보다 재배시 물을 가둬야하는 벼를 재배했을 때 공극내 액상비율이 증가하였고, 이러한 토양환경 변화는 밀 품질 변화에 영향을 미쳤을 것으로 사료된다. 4. 토양 화학성에서 인산과 칼슘의 함량이 작부체계에 따라 유의하게 변화한다고 판단되었으며, 가장 밀 품질을 향상시켰던 콩 재배시 토양 내 인산이 가장 많이 감소하였으므로 토양 인산함량과 밀 품질과의 관계에 대한 연구가 필요하다. 이상의 결과를 통해 국내 품종에서 콩과의 이모작이 경질밀로서 우수한 품질의 밀을 생산하는데 도움이 될 것으로 예상되며, 하작물의 재배가 밀에 어떤 영향을 끼치는지에 대한 생리적 실험 진행에 근거가 될 것으로 판단된다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.17.2-19
• /
• 1982

중이 병변에 관한 수술적 처치는 그 병소 부위가 고막에 국한되어 있거나 중이 강 전벽부 및 내면부의 경우 수술시야가 좋아서 그 처치가 용이하며 술후 청력개선 및 치유경과도 만족할만하며 다양한 수술적 처치방법이 연구되어 널리 시행되고 있다. 그러나 아직도 중이강 후벽이나 상고실에 있는 병소의 처리방법에 대하여서 많은 문제점을 노출시키고 있으며 그 이유로서는 첫째 수술 시야의 장애, 둘째 안면신경 손상의 위험, 셋째 등골 주변부 병소 조작에 의한 외임프의 유출 및 미로 손상의 위험, 넷째 상고실 부위가 너무 협소하여 수술시 병변 확인이 힘든 경우등을 들수 있다. 특히 Staged operation (단계수술)과 Intact Canal Wall Typanoplasty(외청도 보존형 유양동 삭개술)이 소개된 이후로는 더욱더 중이강후벽에 대한 해부학적 지식이 더욱 절실하게 되었으며, 두개골의 인종적 차이를 감안 할때 한국인에 대한 중이강 후벽의 구조적 연구를 필요로 하게 되었다. 중이강의 후벽(유돌벽)은 Reichert's 연골에서 기원되며 제 2새궁(Second branchial arch)에서 발생되며 이 후벽의 구조물중 Sinus tympani는 이관의 내피와(endothelial pouch) 중 후낭 (Saccus posticus) 에서 함기화 (pneumatization)된 중이봉소로서 이부위 병변의 제거가 중이수술시 중요한 의의를 갖는 이유는 만성중이염에 의해 염증성반응이 오래 지속되면 비 후된 점막에 의해 Sinus tympani가 밀폐되고, 지속되는 자극에 의해 주로 안면신경관의 골성부와 등골 및 후반규관(Posterior Semicircular Canal)의 골성부에 육아조직을 형성하기 쉬울뿐더러 진주종에 의해 이 부위의 침식성 파괴를 이르켜 각각의 조직을 노출시킴으로 인해 중요한 합병증을 초래하기 쉬우며 수술로 인한 중대한 후유증이 병발하기 쉬운 곳이므로 임상면에서 중요하다. 그러므로 오래 전부터 이곳 병변의 안전한 제거를 위해 여러사람의 끊임없는 연구가 있었다. Amjad (1968), Donaldson (1970)등은 각각 24개, 20개의 측두골 계측을 실시하여 Sinus tympani의 형태 해부하적 구조에 대하여 연구한 결과 Sinus tympani의 크기와 모양은 여러형태로 변형이 많으며, 특히 주위 중요한 조직과 연관성이 많은 Sinus tympani의 가장 은밀한 심부 (Deepest portion)는 거의 대부분 후부로 신전되는 경우의 변형이 많아 주위조직의 손상없이 Sinus tympani의 병변을 제거하기 힘든 형태라는 결론을 내리고 이곳의 수술적 처리에서 발생 할 수 있는 여러 문제점을 지적하였다. Jako (1965) 등은 Sinus tympani병소의 안전한 제거를 위해 Sinus tympani를 확인할 수 있는 광학거울 (Fine-grade optical mirror)을 이 부위에 넣고 반사시야에서 수술적 처치를 시행할 것을 주장했으나, 수술시의 출혈등에 의한 명료시야의 확보에 문제점이 있어 널리 시행되지 않았다. Saito(1971)등은 Sinus tympani의 접근방법으로서 종래의 중이강내에서 접근방식 (Tympani approach) 보다 유양동을 통한 접근(mastoid approach)이 보다 편리하고 확실한 방법일 것이라는 생각으로 42개의 측두골에 대한 미세해부학적 계측을 실시하였다. 그러나 연구결과에서 그는 Sinus tympani의 상부는 안면신경과 지나치게 가까운 거리에 있어 접근이 용이하지 않았고 후부는 이낭(Otic capsule)에서 발생한 중치밀골(Hard compact bone)로 되어 있으며 안면신경 과 후반규관 사이가 협소하여 수술시 micro-drill burr로서 제거하기가 용이치 않다는 사실을 밝혀내고 mastoid approach로는 Sinus tympani 접근이 힘들다는 결론을 지었다. Goodhill (1973)등은 술자의 위치에서 수술의 전 과정을 시행하는 보편적인 방법에서는 Sinus tympani의 병변제거가 힘들므로 술자의 위치의 반대방향에서 현미경적 시야를 확보함으로써 은밀한 부위의 병변제거가 용이하다는 Circumferential approach 방법을 주장하였으나 수술부위의 감염성이 높다는 점이 문제점으로 지적되었다. 한편 Sinus tympani와 함께 수술시 문제점이 될 수 있는 후벽구조의 일부인 facial recess는 내피와(Endothelial pouch)중 상낭(Saccus superior)과 내낭(Saccus medius)에서 발생한다. 최근 Intact Canal Wall Tympanoplasty에 대한 활발한 연구가 진행되고 이에 따라 단계수술을 시행하는 빈도가 증가함에 따라 이 수술의 성공여부에 관건이 되는 중이강과 유양동의 통기(Ventilation)를 유지시키기 위해서 facial recess에 대한 많은 연구가 있었다. Sheehy(1967)등은 facial recess를 개방하는 이유로서는 첫째 facial recess의 병변이 제거되고 둘째 골성고실륜(bony annulus)을 손상시키지 않고 난원창과 중이강 후부를 노출시킬 수 있으며 셋째 atticotomy를 시행치 않고도 안면신경의 일부와 상고실 (epitympsnum) 을 노출시키는 것이 용이하며 넷째 수술후 유양동의 통기를 유지시키는 Posterior tympanotony를 주장하였다. 중이수술을 성공적으로 시행하려면 중이강후벽의 정확한 형태해부학적 구조를 이해하고 이 부위 병변을 제거하는 용이한 접근방법에 대한 술자의 고도의 기술이 요구되므로 이에 저자는 다양한 해부학적 변형에 대하여 연구할 필요성을 느껴 Sinus tympani와 facial recess를 중심으로 한국인 정상성인의 중이강후벽의 크기와 모양을 계측하였다. 연구대상은 측두골 35개 대상으로 능형융기 (pyramidal eminence) 안면신경, 등골 및 반규관등을 중심으로 주변부 구조의 계측을 시도하였다. 계측의 정확성과 정밀성을 높이기 위해 각각의 은밀한 부위에 Elastic impression material 인 PERMLASTIC$^{(R)}$ (type 1 Polysul_fide base class 2 Regular body)을 삽입한뒤 1 시간 경과 후 그 주위에 복잡한 구조가 양각된 주형물을 분리하여 계측을 실시하였다. 각부위와의 거리는 1/20mm까지 측정가능한 부척이 있는 척도계인 Matui$^{(R)}$ caliper를 사용하여 수술현미경하에서 시행하여 다음과 같은 결과를 얻었다. 1) 능형융기의 전부에서 Sinus tympani의 후부 및 Sinus tympani의 후부와 상부의 최대 신전 거리는 각각 2.54(1.05~5.40)mm, 3.22(1.25~7.45)mm, 0.67(0.40~l.75)mm 였다. 2) Sinus tympani는 상하경계가 난원창하부에서 정원창상부인 경우가 29예 (82.9 %)로 가장 많았다. 3 ) Sinus tympani의 후부는 심부(Deepest portion)가 ponticulus와 subiculum 사이인 경우가 22예(62.9 %)로 가장 많았다. 4) Facial recess의 침골와(Fossa incudis)로부터 하고실(hypotympanum)까지의 사선거리와 난원창과 정원창사이 중앙부에서의 횡선거리 및 침골와에서의 횡선거리는 각각 8.13 (7.90~9.55)mm 3.00 (2.85~3.45)mm 1,81 (1.40~2.15)mm 였다. 5) 안면신경관의 골결손 (bony dehiscence)은 5예 (14.3 %)에서 있었다. 6) 등골족판(footplate)의 전후거리 및 시상돌기(Cochleariform process)와 정원창까지의 거리는 각각 2.98(2.85~3.05)mm, 1.42 (1.35~l.55)mm, 1.85(1.45~2.10)mm 였다.

• Journal of the Korean Wood Science and Technology
• /
• 제2권2호
• /
• pp.5-7
• /
• 1974

본 논문은 필자가 미국 미쉬간대학에 유학중 실시된 연구로서 동대학 목재가공학과에 설치된 소형 목재인공건조장치를 사용하여 일정한 건조조건(건구 온도 $150^{\circ}F{\risingdotseq}65.5^{\circ}C$, 습구온도 $1250^{\circ}F{\risingdotseq}51.7^{\circ}C$, 관계습도 48%, 평형함수율 6.9%)하에 공기 순환속도를 매분당 250ft., 400ft, 및 650ft.로 변경할 때 얻어지는 건조속도를 측정하고, 시간당 건조율을 산출하여 비교 검토한 것이다. 본 실험에 사용한 수종은 북미산소나무 Northern white pine (Pinus strobus L.)로서 시편의 크기는 길이 60cm, 넓이 12.5mm(5in.), 두께 18.7mm(3/4in.)이며 공시목의 표면은 증발조건을 균일히 하기 위하여 포삭하였으며, 마구리(end grain)에는 end coating 하였다. 또한 공기순환속도 측정은 상기대학에 비치된 velometer를 사용하였다. 1. 목재의 섬유포화점(함수율 30%) 이상에 있어서 공시목의 건조율은 건조실내 공기순환속도의 증가에 따라서 증가된다. 즉 공시목의 건조율 증감은 공기 순환속도에 대략 비례한다. 그러나 섬유포화점 이하에 있어서는 공기순환속도의 증강은 건조율 증감에 거의 영향을 이치지 아니한다(그림 1, 2 참조). 2. 실험한 건조조건하에 있어서는 공시목의 초기 함수율이 높을수록 높은 건조율을 얻을 수 있다. 즉 공시목의 초기 함수율(MC30% 이상)이 동일하지 아니한 경우에도 공기순환속도를 증가하면 건조 최종기에 있어서 비교적 빨리 대체로 같은 함수율의 공시목을 얻을 수 있다(실험한 초기 함수율, 건조조건 및 공기순환 속도등은 심한 건조 결함을 유발하지 아니하였음). 3. 본연구 결과에 의하면 공시목의 건조율은 섬유포화점(대략 MC30%)에 있어서 현저한 변화를 나타내고 있다. 즉 공시목의 함수율에 대한 건조율 곡선은 그림 3으로 표시된 바와 같이 섬유포화점 이상에 있어서는 건조율 곡선은 X축(MC)에 대하여 요(凹)형(concave)을 나타냈는데, 섬유포화점 이하의 함수율 범위 30%에서 20%에 있어서는 건조율 곡선은 X축에 대하여 철(凸)형(convex)을 나타냈으며 함수율 20% 이하에 있어서는 재차 심한 요(凹)형을 나타내고 있음을 알 수 있다. 이와감은 결과를 요약표시한 원문 그림4에 있어서, 건조율 곡선의 반곡점은 대략 섬유포화점인 MC 30%와 MC 20%에 위치하고 있음을 알 수 있다. 이와같이 섬유 포화점으로 알려져 있는 MC 30%와 20%에 있어서 건조율이 급변하는 반곡점 즉 한계점을 표시하는 것은 다음과 같은 야유에 의한 것으로 고려된다. 즉 세포막에 흡수된 결합수의 증발은 세포강, 세포간격 및 기타의 미세한 공간에 존재하는 자유수의 증발보다 훨씬 곤란하므로, 함수율 30%에서 20%의 범위에 있어서는 철(凸)형을 나타낸다. 즉 함수율 30%에서 20% 의 범위에 있에서 세포막의 모세관 응축수(capillary-condensed water)의 증발은 대략 동일한 감소율을 나타내나, 공시목의 함수율이 20%에 접근됨에 따라서 한층 강한 결합상태하에 있는 수분(표면 결합수 및 그 부근에 있는 수분)이 증발하게 되나, 그와 같은 수분의 증발은 한층 곤란하므로 함수율 20% 이하에 있어서 건조율곡선은 재차 요(凹)형을 표시하는 것으로 사료된다. 이상의 관계를 요약 표시한 원문 그림 4에 있어서, 반곡점을 가지지 아니한 점선 곡선 AC 와 2개의 반곡점을 가지는 실선곡선 BD를 비교하면, BD곡선은 AC곡선보다 함수율범위 30%에서 20%에 있어서 그 건조율은 현저히 감소되고 또한 D점을 반곡점으로 해서 그 건조율은 가일층 감소되고 있음을 알 수 있다. 이상을 요약하면 생재에서 함수율 30%(섬유포화점)까지는 큰 건조율을 표시하니 함수율 범위 30%에서 20%에 있어서는 그 건조율은 점감되고 함수율 20% 이하에 있어서는 그 건조율은 현저히 감소됨을 표시한다.

• Radiation Oncology Journal
• /
• 제22권1호
• /
• pp.40-54
• /
• 2004

목적 : 정상 흰쥐의 심장에 방사선을 조사한 군과 captopril과 방사선 조사를 병용한 군의 병리학적 소견과 $TNF-{\alpha}$ (tumor necrosis factor-alpha), $TGF-{\beta}1$ (transforming growth factor-beta), PDGF (platelet-derived growth factor), FGF (fibrobiast growth factor)-2의 발현상태를 비교 관찰함으로써 심장의 조기 방사선손상에서 captopril의 효과와 보호기전에서의 사이토카인의 역할을 알아보고자 하였다. 대상 및 방법 : 실험동물(Sprague-Dawley-Dawley 흰쥐)은 대조군, 방사선 조사 단독군, captopril과 방사선 조사 병용군으로 분류하였다. 방사선 조사 단독군은 12.5 Gy의 X-선을 좌흉곽에 단일 조사하였다. Captopril과 방사선 조사 병용군은 1일 50 mg/kg의 captopril을 방사선조사 1주 전부터 실험종료 시인 8주 후까지 식수에 섞어 음용시켰다. 실험 결과는 방사선조사 2주와 8주 후에 심방과 심실의 병리조직 소견을 비교 관찰하였고 면역조직화학염색으로 $TNF-{\alpha}$, $TGF-{\beta}$1, PDGF, FGG-2의 발현을 관찰하였다. 결과 : 방사선조사 2주 후 병리조직 소견상 대조군에 비해 심한 심방 심장막(pericardium) 섬유소 침착(p=0.093), 심실 혈관주위(perivascular space) 부종(p=0.082)과 혈관주위 및 사이질(interstitium)의 섬유소 침착(p=0.018)이 보였으며, 심방 심장막의 섬유소 침착은 심실에 비해 현저하였다(p=0.009). 방사선 조사 후 8주의 변화는 2주 소견에 비해서 부종 및 섬유소 침착은 소멸되었고, 섬유화가 관찰되었는데 이는 심실보다 심방의 심장막에서 현저하게 나타났다. Captopril과 방사선 병용군은 방사선에 의한 심장손상이 감소되어 병리학적 소견상 대조군과 비교 시 유의한 차이가 없었고, 방사선 조사 단독군과 비교하여 특히 2주 후에 심방의 심내막(endocardium) 섬유소 침착(p=0.047)과 심실의 사이질 섬유소 침착(p=0.019) 및 부종(p=0.042)이 현저히 감소되었다. 방사선조사 2주 후에 $TNF-{\alpha}$, $TGF-{\beta}$1, PDGF, FGF-2의 발현이 방사선 조사 단독군에서 대조군과 비교하여 증가되었으며, 특히 심방의 심장막 및 심장내막에서 현저하게 증가되었다. 방사선조사 8주 후에는 심장막의 $TNF-{\lapha}$, $TGF-{\beta}$1이 계속 증가되었으며 $TGF-{\beta}1$는 심방 심내막(p=0.015)과 사이질(p=0.025)에서 특히 증가되었으나, PDGF와 FGF-2는 감소되었다. Captopril과 방사선조사 병용군은 2주에 방사선 조사 단독군에 비하여 $TNF-{\alpha}$, $TGF-{\beta}$l, PDGF의 발현이 감소되었으며, 8주에는 심방과 심실의 심장막에서 $TNF-{\alpha}$가 현저히 감소되었고(p=0.049, p=0.009) $TGF-{\beta}1$, PDGF의 경우 감소되는 경향을 보였으나 유의한 차이는 없었다. 결론 : 흰쥐의 심장에 captopril을 방사선과 병용 투여하여 병리조직 소견을 관찰한 결과 방사선에 의한 조기 심장 손상이 감소됨을 확인할 수 있었다. 또한 방사선조사 후 2주 및 8주에 병용군에서 단독군에 비하여 $TNF-{\alpha}$, $TGF-{\beta}1$, PDGF 등의 발현이 감소하는 양상이 관찰되어, captopril이 사이토카인의 발현을 억제함으로써 방사선에 의한 심장손상을 감소시킬 수 있을 것으로 생각된다.

• 한국결정학회지
• /
• 제8권1호
• /
• pp.6-14
• /
• 1997

제올라이트 X에 $Sr^{2+}$와 $K^+$ 이온이 교환된 $Sr_{31}K_{30}-X$와 $Sr^{2+}$와 $Tl^+$ 이온이 교환된 $Sr_{8.5}Tl_{75}$의 결정구조를 공간군 Fd3로 $21(1)^{\circ}C$에서 단결정 X선 결정학적 방법으로 해석하였다. 각각의 결정은 $Sr(ClO_4)_2$와 (K 혹은 Tl)$NO_3$의 몰 비가 1 : 5인 용액을 사용해서 흐름 법으로 5일 동안 이온 교환시키고 $360^{\circ}C$에서 진공탈수 시켜 두 결정을 얻었다. 이들 결정은 회절강도가 $I>2{\sigma}(I)$인 293개와 351개의 회절반사를 사용하여 최종오차인자가 $R_1=0.072,\;R_w=0.057$과 $R_l= 0.058,\;R_w=0.044$까지 각각 정밀화하였다. $Sr_{31}K_{30}-X$결정에서 $Sr^{2+}$ 이온과 $K^+$ 이온은 모두 다섯 개의 서로 다른 결정학적 자리에 존재하였다. 단위세포당 16개의 $Sr^{2+}$ 이온은 결정학적 자리 I인 D6R의 중심에 각각 위치하고 D6R 모두를 채우고 있다. 나머지 15개의 $Sr^{2+}$ 이온과 17개의 $K^+$ 이온은 큰 동공 속에 있는 결정학적 자리II에 위치하고 세 개의 산소이온이 이루는 평면에서 각각 $0.45{\AA},\;1.06{\AA}$ 큰 동공속으로 이동하여 위치하고 골조산소와 결합거리는 각각 $2.45(1){\AA},\;2.64(1){\AA}$이다. 13개의 $K^+$ 이온은 두 개의 다른 결정학적자리 III'에 위치하며 인접한 산소와의 결합거리는 각각 $2.88(7){\AA}$와 $3.11(10){\AA}$이다. $Sr_{8.5}Tl_{75}-X$에서는 $Sr^{2+}$이온과 $Tl^+$ 이온이 역시 다섯 개의 서로 다른 결정학적 자리에 위치한다. 약 8.5개의 $Sr^{2+}$ 이온은 결정학적 자리 I에 있으며, 15개의 $Tl^+$ 이온은 D6R의 3회 전축상의 소다라이트내에 있는 결정학적 자리 I'에 있다. 이 $Tl^+$ 이온은 골조산소와의 결합거리가 $2.70(2){\AA}$이며 세 개의 산소가 이루는 평면에서 $1.68{\AA}$ 소다라이트내로 이동하여 위치한다. 32개의 $Tl^{+}$ 이온은 결정학적 자리 II에 존재하고 있으며 산소와의 결합거리를 $2.70(1){\AA}$을 유지하면서 큰 동공속으로 $1.48{\AA}$ 이동하여 위치한다. 약 18개의 $Tl^+$ 이온은 결정학적 자리III에, 또 다른 10개의 $Tl^+$ 이온은 결정학적 자리III'에 존재하고 골조 산소와 각각 $2.86(2){\AA},\;2.96(4){\AA}$의 결합거리를 이룬다.

• 한국전통조경학회지
• /
• 제41권2호
• /
• pp.35-45
• /
• 2023

첫째, 본 연구는 지역 원림국이 집계한 한단시 노거수의 수종과 수령 등 기본 정보를 결합해 노거수의 공간적 분포 특징을 ArcGIS 그림으로 분석하였다. 수종의 유형, 수령분포, 소유권 현황, 성장세 및 다양성 현황을 종합적으로 분석하였다. 통계적으로 콩나무과의 회화나무속, 아카시아속, 쥐엄나무속, 자귀나무속이 다수의 비중을 차지하였고, 이중 회화나무은 가장 높은 비중을 차지하였다. 회화나무는 한단시 각 현 및 구에 이르기까지 널리 또한 집중적으로 군락을 이루어 분포되어 있었다. 수령 및 분포를 보면 1000년 이상의 노거수는 회화나무, 느티나무, 향나무, 산뽕나무, 황단나무, 쥐엄나무, 황련목, 측백나무가 주를 이루었다. 둘째, 각 유형의 노거수 현황에서 발견한 바와 같이 다양한 유형의 노거수의 현황을 조사한 결과, 한단시 노거수보호 관리 체계, 보호 관리 과정 및 보호 관리 이점을 연구하여 자연성지 보호 관리에서 한단시 노거수의 역할을 분석하여, 노거수의 보호는 주로 지역사회를 주체로 하는 문화, 신앙적 보호형태를 보이며 보호상태는 성장환경과 밀접한 관련이 있다. 현재 노거수 보호의 핵심 동력은 주로 노거수에 대한 숭배이다. 그 신성함을 노거수에 기탁하여 자연이 노거수에 부여한 자연적 성품을 사회 활동의 지도의식으로 승화시켜 자연의 '미(美)'와 인격의 '선(善)'이 잘 결합되어 있다. 노거수의 보호 상태는 주변 환경과의 상호 작용 정도 및 여러 문화 및 주체의 참여와 밀접한 관련이 있다. 장기간의 노거수 성장 과정에서 점차 주변 환경과 지속적으로 상호 작용하여 상향식 및 하향식의 교차 지역, 다문화 및 다중 주체가 참여하는 '자연-문화-경관' 시스템이 자발적으로 구축되는 과정에서 노거수를 중심으로 자연성지가 형성된 것으로 보인다. 셋째, 중국은 노거수보호와 회복 조치를 중점으로 하였지만, 노거수 자원의 관리 과정에서 노거수에 대한 역사, 문화적 가치, 식물 다양성 의의 및 사회적 가치에 대한 종합적인 고려가 부족하여 보호 관리시스템이 허술하다. 공간의 지역적 특징, 재산권 및 보호 상 특징, 가치상 특징의 세 가지 지표는 한단시 노거수의 자연성지 평가에 있어서 노거수를 중심으로 하여 자발적으로 형성 중인 자연성지를 발견할 수 있으며, 이는 전통 의식 관리, 자원 보호 실천, 신앙 체계 구축, 생명공동체 가치 실현 면에서 높은 가치가 있다. 이들을 장기간 보호하고 발전시킬 수 있는지에 대해서는 체계적인 관리 체계가 뒷받침되어야 한다. 넷째, 현재 중국에서는 보호 구역에 대한 인식이 아직 성숙하지 않아 '자연성지'는 자연보호구역 체계가 구축되는 과정에서 중요한 연구 내용으로 다루어야 한다. 상향식 지역사회 참여를 주체로 하는 자연성지 관리 형태는 현재 중국의 하향식 자연보호구역 관리 유형에 대한 강력한 보완이다. 이를 기초로 하여 노거수 보호를 자연보호구역 체계에서 천연기념물이라는 자연보호구역 형태에 포함해야 한다. 또한 자연보호구역 주변 지역 주민도 생물 다양성 보전의 주체 중 하나가 되어야 한다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.