• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.111-122
• /
• 2018

The purpose of this study was to investigate the bodice prototype method suitable for the upper body shape of old-old aged women using the 3D anthropometric data. And it was to provide the basic data for the upper body garments of old-old aged women. In the overall appearance evaluation, the B pattern was rated as 4.00, and it was evaluated as the most suitable for the bodice prototype of the old-old aged woman. The E pattern was rated lower than normal, and the L pattern and the S pattern were found to be inadequate for older female bodice prototypes. As a result of the measurement of the waist and bust air gap of bodice prototype, the air gap of the bust was not significantly different between the patterns. But the waist air gap showed the largest difference between the L pattern and the S pattern. As a result of evaluating the appearance, the amount of space in the state of 3D simulation, and the air gap, the pattern B appeared to be the most appropriate prototype for the old-old aged women's body shape. However, there is a tendency that the shoulder end point is biased toward the back, so it is necessary to set the inclination of the back shoulder line to be more gentle. Conversely, the front shoulder should be more inclined. In the case of the 3D simulation, the B pattern showed that the other parts generally fit well. In the case of the 3D simulation program used in this study, it was evaluated that it is suitable only for the normal body shape because it is impossible to set the isometric angle which is one of the characteristics of the older female body shape. A study on the bodice prototype suitable for the bent body shape should be carried out through experiments on the actual body shape of various elderly women. In order to cope with the increase of elderly people who are familiar with digital, I think it is necessary to develop an avatar that reflects the old female body shape.

• Journal of Aquaculture
• /
• v.12 no.3
• /
• pp.193-196
• /
• 1999

In order to obtain the basic data for the effective seed production of Ureshis unicinctus sediment preference, burrow shape and burrowing depth in sediment were investigated in the laboratory. The highest valus in both sediment preference and burrowing rate of U. unicinctus were shown at fine and (0.11~0.50mm in the mean diameter). U. unicinctus made various types of burrows, such as J, L, S and U shapes. Generally only one individual inhabits in burrow with head-up.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.562-567
• /
• 2006

Micro-alloyed steel or heat-treatment-free used in clean technology have been replacing for conventional quenched-and-tempered structural steels since the micro-alloyed forging steel was developed in early 1970s in Germany for saving money of heat treatment, simplified process, short delivery and good productivity. In this paper, ball stud assembled in steering system for automobile was selected to compare conventional process making heat treatment with new process using high strength micro-alloyed steel without heat treatment. The conventional process for ball stud was composed of a total of 6 steps including upsetting, forward extrusion, machining, burnishing and tread rolling with heat treatment and shot blasting. As opposed to conventional process, newly proposed process for ball stud using the clean technology without heat treatment is simplified such as forward extrusion, heading, upsetting, forming having a flange shape and tread rolling. Also net shape forming process to achieve specified process not to include machined step fur manufacturing the ball stud was applied to newly simplified process since micro-alloyed steel is difficult to be formed.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.367-373
• /
• 2013

In this study, the penetration characteristic from the cubic and cylindrical penetrator consisting of tungsten material with the velocity of 2,300 m/s is evaluated and the penetration possibility into the target is confirmed. The design of shape and size of penetrator is directly related to space and weight of the warhead. AUTODYN-3D simulation is used to study the penetration effect of penetrator. The purpose of numerical analysis is to verify the penetration characteristic with various L/D penetrator. The penetration performance of penetrator with identical weight due to the shape is also confirmed. The cylindrical and cubic penetrator has enough penetration energy on constant target body. Because the possibility of 2'nd penetration is important factor after 1'st penetration into target body, residual velocity of residual mass must be existed as much as possible. As geometrical shape ratio increases, penetration performance is confirmed to improve.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.25-30
• /
• 2000

Bacterial wilt(Ralstonia solanacearum) is one of the major diseases of flue-cured tobacco (Nicotiana tabacum L.) in the world. This study was conducted to investigate degree of dominance, selection, and correlation between leaf shape and degree of bacterial wilt resistance in flue-cured tobacco. The degree of disease caused by bacterial wilt was evaluated in parents, F$_1$, F$_2$ and F$_3$ populations of two crosses, BY 4 x NC 95 and BY 4 x Coker 86, in the infected field. The leaf shape index was also measured in parents and F$_2$ population of BY 4 x NC 95. The incidence of bacterial wilt was observed in the middle of June and peaked in late July, when the highest value of pathogen density reached 1.0 x 10$^{6}$ colony forming unit per gram. It was concluded that the inheritance mode of risestance to bacterial wilt in the above two crosses of susceptible and resistant varieties was recessive and polygenic. The resistance to bacterial wilt was significantly correlated with leaf shape in F2 generation of BY 4 x NC 95. But certain plants having narrower leaves were also resistant to bacterial wilt. It is considered that the bacterial wilt resistant lines having narrower leaves could be selected. The selection for bacterial wilt resistance in the F$_2$ population might be effective.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1684-1687
• /
• 1997

In this paper, a three-dimensional algorithm for the insulation design of the high-voltage equipment is presented. In general, the insulation design consists of two steps. They are electric field calculation and correction of the shape to be designed. In the proposed algorithm, the combination method of charge simulation and surface charge simulation is used to calculate the three-dimensional electric fields. As for the correction of the shape, indirect control provided by rational B-spline is more useful than direct control. The use of rational B-spline reduces in the number of design variables and garrantees the smooth curvature of the designed shape. The proposed algorithm is applied to the design of the shape of the shield ring which has been designed by the method of trial and error.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.4
• /
• pp.380-390
• /
• 2015

The morphological characters were observed in six taxa in the genus Dioscorea of Korea (D. polystachya, D. japonica, D. nipponica, D. quinqueloba, D. tenuipes, and D. dokoro). The underground structure and the formation of bulbil were useful characters for separating sect. Enanatiophyllum from sect. Stenophora. The important characters for discriminating taxonomic entities were as follows: the position of the anther and the shape of the pistil in the microstructural characters, including the protuberance of the base of the petiole, the shape and color of the flower, the shape of the fruit, and the shape of the seed wing. Based on the results, a key to Korean Dioscorea is provided and the distribution of these species in Korea is described.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.71-77
• /
• 2005

This study aims to find the safe vent area to prevent a destruction of building by gas explosion in a building. Explosion vessel which used in this experiment is 1/5 scale down model of simple livingroom and its dimension is 100cm in length 60cm in width and 45cm in height. Liquified petroleum gas(LPG) was injected to the vessel to the concentration of 4.5vol%, and injection rate were varied in 1L/min or 4L/min. Gas mixture was ignited by the 10kV electric spark. For analysis the characteristics of vented explosion pressure according to the vent size and vent shape, its size and shape were varied. From the experiment, it was found that explosion pressure in the vented explosion :in affected by the gas injection rate, vent area and vent shape. And the vent area to volume ratio(S/V) to prevent the building destruction by explosion pressure, it is recommended that the design of vent area happened by the explosion should be above 1/500cm in S/V. And if the vent area has complicate structure in same area, vented explosion pressure will be higher than a single vent, and possibility of building destruction will increase. Therefore to effectively vent the explosion pressure for protect a building and residents from the gas explosion hazards, the same vent area should have a singular and constant shape in the cross-sectional area of the vessel.

• Transactions of Materials Processing
• /
• v.24 no.3
• /
• pp.187-193
• /
• 2015

The objective of the current study is to determine cross-sectional profile of intermediate dies in order to improve the plastic strain homogeneity which directly affects not only the dimensional accuracy but also the mechanical properties of final product by redesigning the intermediate dies using the conventional electric field analysis (EFA) method. Initially, the multi-pass shape wire drawing was designed by using the equivalent potential lines from EFA. The area reduction ratio was calculated from the number of passes in multi-pass shape wire drawing but constrained by the capacity of the drawing machine and the drawing force. In order to compensate for a concentration of strain in a region of the cross section of the wire, the process for multi pass wire drawing from initial round material to an intermediate die was redesigned again using the electric field analysis. Both drawing process designs were simulated by the finite element method in which the strain distribution and standard deviation plastic strain of the cross section of drawn wires were examined.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.15 no.3
• /
• pp.7-13
• /
• 2019

To improve the flow distribution at channel locations in the welded plate heat exchanger with "L"-type inflow, the flow visualization of Model 1 was carried out. Besides, the characteristics of flow distribution was investigated experimentally according to the header shape. The inlet flow rate for each channel location was increased at the side channels but decreased at the central channels. In the case of Model 2, which has a slant structure added to the basic header of Model 1, the unevenness of inlet flow increased by 23% from 0.019 to 0.023 as compared to Model 1. On the other hand, Model 3, which has a baffle structure added to Model 2, showed 0.064 unevenness in inlet flow, which was a 36% reduction one compared to Model 1. To improve the distribution at each channel in the welded plate heat exchanger with "L"-type flow, it is necessary to improve the header external shape for the guide of flow as well as the baffle structure for reduction of vortex flow.