• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.39-44
• /
• 2003

The welded specimens were made by butt welding of the 2 wires of 50mm length using the pulsed YAG laser. The laser welded wires were tested for investigating the shape memory effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was Investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.

• Korean Institute of Interior Design Journal
• /
• v.23 no.2
• /
• pp.12-20
• /
• 2014

The purpose of this study is to analyze the general patterns of the floor plans and space of Usonian house which designed by Frank Lloyd Wright. this thesis can be summarized as follows : 1) F.L.Wright's houses mostly used simple geometric shapes as the basis for most of his architectural designs. In his early works, his typical floor plans were square or rectangular shapes, which gradually were transformed into various kinds of shape to make the adjustment of location of the site and shape. 2) The general patterns of floor plans of his U-houses were L-shaped or straight shaped using a $4{\times}4$ grid system. Most of U-houses consisted of 3 space: living room, workspace(Kitchen) & dining, and bedroom. Among them, a workspace worked as core role in each house. 3) Even though solid wall is the opposite concept of the transparent glass but most U-houses were designed to have solid walls on one side to provide a gallery space(to secure habitability of resident) and transparent glass walls used on the other side to connect between interior space and natural space of exterior. 4) The cantilever have not been used before Usonian house but F.L.Wright used it which take charge of functions as transfer space between inside space and outside space. 5) F.L.Wright saw the nature as a truth, so he thought the interior space would be natural and all houses must be able to adjust to the natural environment.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.110-115
• /
• 2004

The immature fruits of Poncirus trifoliata L. or Ponciri fructus (PF), well known as 'Jisil' in Korea, have been used against allergic diseases for generations, and still occupy an important place in traditional Oriental medicine. Anti-allergic effects of this fruit have been investigated in a few experimental models. Immunoglobulin E (IgE) is the principal immunoglobulin involved in immediate hypersensitivities and chronic allergic diseases. The effect of an aqueous extract of PF on in vivo and in vitro IgE production was investigated. PF dose-dependently inhibited the active systemic anaphylaxis and serum IgE production induced by immunization with ovalbumin, Bordetelia pertussis toxin and aluminum hydroxide gel. PF strongly inhibited interleukin 4 (IL-4)-dependent IgE production by lipopolysaccharide-stimulated murine whole spleen cells. In the case of U266 human IgE-bearing B cells, Ponciri fructus also showed an inhibitory effect on the IgE production. On the other hand, mast cell hyperplasia can be causally related with chronic inflammation. Stem cell factor (SCF), the ligand of the c-kit protooncogene product, is a major regulator and ohernoattractant of mast cells. Ponciri fiuctus (1 mg/mL) significantly inhibited the SCF-induced migration of rat peritoneal mast cells (RPMCs). RPMCs exposed to SCF (50 ng/mL) resulted in a drastic shape change with a polarized morphology while the cells exposed to Ponciri fructus (1 mg/mL) remained resting, with little or no shape alteration. The drastic morphological alteration and distribution of polymerized actin were blocked by pretreatment with Ponciri fructus. In addition, Ponciri fructus inhibited both TNF-alpha and IL-6 secretion from RPMCs stimulated with SCF. These results suggest that Ponciri fructus has an anti-allergic activity by inhibition of IgE production from B cells. These findings also provide evidence that Ponciri fructu inhibits chemotactic response and inflammatory cytokines secretion to SCF in mast cells.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.86-95
• /
• 2012

This study investigated the effects of adding a third alloying element, Ni, to create $Fe_{70-x}Pd_{30}Ni_x$ (x = 2, 4, 6, 8 at.% Ni) ferromagnetic shape memory alloys (FSMAs). The Ni replaced a portion of the Fe. The $Fe_{70-x}Pd_{30}Ni_x$ alloys were homogenized through hot and cold forging to gain a ~38% reduction in thickness, next they were solution-treated (ST) with annealing recrystallization at $1100^{\circ}C$ for 8 h and quenched in ice brine, and then aged at $500^{\circ}C$ for 100 h. Investigation of the microstructures and magnetostriction indicated that the greater Ni amount in the $Fe_{70-x}Pd_{30}Ni_x$ alloys reduced saturation magnetostriction at room temperature (RT). It was also observed that it was more difficult to generate annealed recrystallization. However, with greater Ni addition into the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys, the $L1_0+L1_m$ twin phase decomposition into stoichiometric $L1_0+L1_m+{\alpha}_{bct}$ structures was suppressed after the $500^{\circ}C$/100 h aging treatment. The result was that the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys maintained a high magnetostriction and magnetostrictive susceptibility (${\Delta}{\lambda}{_\parallel}{^s}/{\Delta}H$) after the alloys were aged at $500^{\circ}C$ for 100 h. This magnetic property of the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys make it suitable for application in a high temperature (T > $500^{\circ}C$) and high frequency environments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.81-85
• /
• 2017

Fiber-reinforced polymer composites, which are made by combining a continuous fiber that acts as reinforcement and a homogeneous polymeric material that acts as a host, are engineering materials with high strength and stiffness and a lightweight structure. In this study, a shape memory alloy(SMA) reinforced composite actuator is presented. This actuator is used to generate large deformations in single lightweight structures and can be used in applications requiring a high degree of adaptability to various external conditions. The proposed actuator consists of numerous individual laminas of the glass-fiber fabric that are embedded in a polymeric matrix. To characterize its deformation behavior, the composition of the actuator was changed by changing the matrix material and the number of the glass-fiber fabric layers. In addition, current of various magnitudes were applied to each actuator to study the effect of the heating of SMA wires on applying current.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.941-948
• /
• 2017

Recently, hydrogen energy has been in the spotlight as an alternative to diminishing fossil fuels and as a potential solution to environmental pollution. The development of hydrogen-fueled vehicles and the demands for improved fuel efficiencies have resulted in the need to increase the volume of the hydrogen pressure vessels. Pressure vessels having an elliptical bottom, as opposed to one that is hemispherical, allow for a greater capacity. However, there are insufficient studies on the feasibility of the forming process required for an elliptical bottom. In this study, the liner capacity is calculated according to the ratios of the major to the minor axes of the elliptical bottom part in a hydrogen pressure vessel. Structural safety is verified through finite element analyses, and the results are compared to the theoretical results. The feasibility of the proposed elliptical shape of the pressure vessel bottom, while filled to maximum capacity, is validated through forming analysis.

• Parasites, Hosts and Diseases
• /
• v.58 no.1
• /
• pp.15-25
• /
• 2020

The third stage larvae (L3) of Anisakis typica were detected in 2 species of threadfin bream, Nemipterus hexodon and N. japonicus, from the Gulf of Thailand, and were morphologically and molecularly characterized. Total 100 threadfin breams, 50 Nemipterus hexodon and 50 N. japonicus, were examined with naked eyes after the opening of abdominal cavity with scissors. Almost all infected larvae remained alive and active even the fish were transported for 1-2 days. Anisakid larvae were exclusively distributed in the body cavity and rarely in the liver. The prevalence of A. typica L3 were 68.0% and 60.0% in N. hexodon and N. japonicus and their infection intensities were 3.5 and 4.2 per fish infected each. Morphological and morphometric analysis were performed by viewing specimens under both a light microscope and a scanning electron microscope. Interestingly, the protruded mucron of Anisakis typica under SEM showed a distinct cylindrical shape that differed from the cone shape of A. simplex. The protruded mucron could be used to identify A. typica L3 larvae in the future. A comparison of the ITS1-5.8S-ITS2 rDNA nucleotide sequences of these species revealed high blast scores with A. typica. Conclusively, it was confirmed that A. typica L3 are prevalent in threadfin breams from the Gulf of Thailand, and their morphological and molecular characters are something different from those of other anisakid larvae, including A. simplex and A. pegreffii.

• Korean Journal of Oriental Medicine
• /
• v.12 no.1
• /
• pp.39-48
• /
• 2006

The Following is a list of specific external and internal morphology of Rheum palmatum L. and R. undulatum L. in Rhei Rhizoma. 1. For the original plants of Rhei Rhizoma in the literatures. 18 plants are reported. 2. The external characteristics of original plant : R. palmatum has a large palmate leaf, its petiole of radical leaf has a simple bristle and its flower is purple and pink color. Whereas R. undulatum has a medium ovate leaf, its petiole of radical leaf is purphish, its stem leaf surrounds a half of stem and its flower is yellowish white color. 3. The character of herbal states : a. diameter and size-- R. palmaum is bigger and heavier than R. undulatum. b. in section--R. palmatum is dark brown color, R. undulatum is bright brown color Fibrovascular bundle is arranged in circle shape in R. patmatum. R. undulatum shows a distingushed wheel shape. 4. The internal characteristics : R. palmatum has a large intercellular space of cork layer, its cambium is clear and a xylem medullary ray is comparatively tight, Whereas R. undulatum has a tight intercettular space of cork layer., its cambium is a few clear and xylem medullary ray is verty tight. As these results, additional study is required to distinguish herbs and their effect among many kinds of same genus-degree of relatedness.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.179-187
• /
• 2000

The achene morphology about 16 taxa of Korean Aster L. sensu lato were investigated to estimate its taxonomic values. The achene shapes were divided into four types; oblanceolate-oblong, obovate, oblong and obovate-oblong. The trichome shape on achene six types; uniseriate-conical, filiform, cylindrical, capitate type, long stalk capitate and globular. Their distributional features on upper part of achene four types; absent, sparse distribution of conical trichome, dense distribution of conical trichome and mixed distribution of conical and capitate trichome. The achene shapes and trichome characteristics were regarded to be a good characters in delimiting taxa because these did not differ among individuals in same taxa, but differ among the taxa. If Korean Aster L. sensu late were divided into Kalimeris, Heteropappus, Aster, Cymnaster, the capitate forms and mixed distribution of conical and capitate trichome were recognized as the good characters in delimting above section such as genus Kalimeris and Heteropappus, section Pseudocalimeris of Aster L. sensu stricto.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.238-245
• /
• 2019

This study investigated the characteristic of aerobic granular sludge (AGS) process to treat the sewage having low carbon/nitrogen ratio (Biochemical oxygen demand ($BOD_5$):Total nitrogen (T-N), 4.5:1) in sequencing batch reactor (SBR). The removal efficiency of $BOD_5$, suspended solid (SS), T-N and phosphorus ($PO_4{^{3-}}$-P) were 92.6%, 64.3% and 90.1%. Concentration and size of AGS were changed in proportion to the organic matters and nitrogen concentration of the influent (Concentration and size of AGS: 1,700-3,000 mg/L, 0.5-1.0 mm). Mixed liquor suspended solid (MLSS) also changed with the concentration of AGS (MLSS: 2,000-3,500 mg/L). When the settling time was shortened from 15 min to 10 min, size and shape of AGS were maintained (Size of AGS: 1.0-1.5 mm). In addition, the concentration of AGS and MLSS increased (Concentration of AGS: 3,500 mg/L, MLSS: 4,000 mg/L). Concentration, size and shape of AGS were affected the settling time of the reactor more than the concentration of organic matter and nitrogen in the influent. In the results of removal efficiency and changes in AGS, we confirmed that the SBR process using AGS can be used to treat the sewage having low carbon/nitrogen ratio by applying short settling time.