• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.168-172
• /
• 2004

본 연구에서는 지점빈도해석의 단점을 보완하기 위해 지역화의 개념을 사용한 지역빈도해석을 수행하였다. 지점빈도해석은 수문자료의 관측기간이 짧은 경우 정확도에 문제를 발생시킬 수 있으므로 지점 내 충분한 수의 자료 확보가 선행되어야 하나, 우리나라의 경우 지점별로 자료수가 많지 않기 때문에 지역빈도해석을 통해서 보다 정확하고 안정적인 확률수문량을 산정할 수 있다. 본 연구에서는 한강유역의 강우자료 선별을 통해서 신뢰성 있는 자료를 구축한 후, Regional Shape Estimation법과 Index Flood법을 사용한 지역빈도해석을 각각 실시하여 지점빈도해석을 시행한 결과와 비교 분석하였다. 그 결과, 한강유역의의 경우 Regional Shape Estimation 법보다 Index Flood 법이 약간 우수하게 나타났으며, 이질성이 내포되어 있는 경우라도 지점빈도해석보다는 지역빈도해석 기법이 우수하게 나타났다. 국내의 경우와 같이 관측 자료기간이 짧은 경우에는 지점빈도해석 기법보다는 지역빈도해석 기법을 적용하는 것이 보다 신뢰할 수 있는 확률수문량을 도출할 수 있을 것으로 판단된다.

• Geomechanics and Engineering
• /
• v.1 no.2
• /
• pp.113-120
• /
• 2009

The results of FLAC3D-based numerical evaluation of the bearing capacity shape factor $s_{\gamma}$ are presented for square and rectangular footings on granular soils. The results confirm a peculiar effect found earlier by Zhu and Michalowski (2005), where for large values of internal friction angle, $s_{\gamma}$ exhibits a peak at some aspect ratio of the footing, and then decreases towards unity at large aspect ratios. The Zhu and Michalowski's results were derived using the finite element program ABAQUS, and the results presented in this note corroborate their earlier findings.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.263-270
• /
• 1995

The use of the shape memory alloy, Nitinol wire, is investigated as an actuator for enhancing the damping in structural vibration systems. The first-order mathematical model of the Nitinol wire is obtained from the experimental data for an actuator. Finite element method is utilized for the strain gage sensor model, which is installed at the root of cantilever beam. A simple system, cantilever beam, is built as a flexible structural system to implement a control law with the Nitinol wire actuator. The system model including sensor and actuator is derived, which agrees with the experimental results. The actuator dynamics is augmented with the system so as to design PI controller and the one of robust controllers, LQG/LTR controller, and the control laws are implemented experimentally. The experimental study shows the feasibility of utilizing the Nitinol wire as an actuator for the purpose of vibration control.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.891-892
• /
• 2006

To test the correlation between grain shape and growth behavior we prepared WC-TiC-Co samples with rounded (Ti, W)C grains and faceted WC grains. The growth of rounded (Ti, W)C grains was normal. In contrast, the growth of faceted WC grains was abnormal or suppressed depending on the initial size of WC particles. These observations were explained using growth theories of crystals in a liquid and were also confirmed by a simulation using their growth equations. The present results thus demonstrate that the growth behavior of carbide grains in a liquid is governed only by their shape, irrespective of the presence of another phase.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.1
• /
• pp.99-106
• /
• 1990

With two-class-based storage assignment policy and dual command cycle in Automated Storage/Retrieval Systems(AS/RS), the problem of determining the region dedicated for class-one item is considered. First, the expected travel time of the S/R machine is derived when the boundary of the class-one region is square. Secondly, a heuristic procedure is proposed which determines sequentially the class-one region in a discrete rack. An application of the procedure generates leaf shape region which confirms that the L-shape partition is not necessarily optimal.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.38-43
• /
• 2019

Electrowetting on dielectric (EWOD) is a unique method of shape control of small-volume droplets in microfluidic biochips that relies on modification of surface wetting characteristics using electrical methods. In this study, the droplet shape control on various dielectric surfaces by the EWOD and the effect of droplets on the contact angle as well as the shape were investigated. The droplet used in the experiment was on a sample substrate with $5{\mu}l$ of de-ionized water (DIW) using a micropipette, and wettability was measured with a contact angle meter. This study is expected to be helpful for the development of various micro-total-analysis-systems (${\mu}TAS$) and microfluidic systems with MEMS technology.

• Journal of Species Research
• /
• v.8 no.3
• /
• pp.283-287
• /
• 2019

Pardosa pseudolaevitarsis n. sp. and Hygrolycosa umidicola Tanaka, 1978 belonging to Lycosidae are described from Korea. To date, fourteen species in the genus Pardosa C. L. Koch, 1847 have been described from Korea. H. umidicola belongs to Hygrolycosa Dahl, 1908 was once described from Korea, but the previous description of this species could not provide adequate scientific evidence for adding H. umidicola to the Korean spider fauna. Pardosa pseudolaevitarsis n. sp. is similar to P. laevitarsis Tanaka & Suwa, 1986 in the shape of its epigyne and palp, but can be distinguished by the followings: epigynal atrium small; spermathecae extending to the end of atrium; shape, location and orientation of fertilization duct in epigyne and internal genitalia; blunt basal spur of median apophysis in palp; number, shape and arrangement cheliceral teeth on both margins. Both species were collected using pitfall traps on a ridge between rice fields and seem to prefer habitats with relatively high humidity.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.1-5
• /
• 2005

We report molecular line observations of CO(1-0), $^{13}CO(1-0)$, CS(2-1), and HCN(1-0) with SRAO 6m telescope toward L1014-IRS which is thought to be a very faint infrared source embedded in previously known 'starless' core L1014. The CO(1-0) observations find several components with different velocities along the line of sight of L1014, $4km\;s^{-1}$ and between $40{\sim}50km\;s^{-1}$. We find a parsec scale CO molecular outflow at the $4km\;s^{-1}$ component for the first time the direction of which is coincident with that of the small scale (${\sim}500pc$) outflow previously found. Although the observation is not covered for whole area of the outflow, the size of the molecular outflow seems not very inconsistent with the expected age of L1014-IRS. More accurate size and shape of the molecular outflow from L1014-IRS will be determined from the full coverage mapping in CO over the outflow region in very near future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.321-325
• /
• 2007

3개의 매개변수(location, scale, shape)로 이루어진 GEV와 GLO 분포는, 미국의 공식적인 홍수빈도 분포인 Log Pearson Type III와 함께 수문분야에서 중요한 위치를 차지하고 있다. 본 연구에서는 Monte Carlo 실험을 이용하여 GEV와 GLO 분포에서 서로 다른 두 지점의 유출량 자료를 생성하여 L-CV(L-moment Coefficient of Variation; $\tau_2$)와 L-CS(L-moment Coefficient of Skewness; $\tau_3$)를 추정하였으며, L-moment 추정값들 간의 교차상관$(\tau_2-\tau_2,\;\tau_3-\tau_3,\;\tau_2-\tau_3)$과 유출량 자료간의 교차상관의 관계를 Simple Power 함수를 이용하여 유도하였다. 실험 과정에서 GEV와 GLO 분포가 비현실적인 음수 유출량을 생성하여, 실험 결과에 큰 영향이 있음을 확인하여, 두 분포에서 생성된 유출량 자료에서 음수값을 제외한 GEV+와 GLO+ 분포를 이용하여 관계식을 유도하고 이를 GEV와 GLO 분포의 결과와도 비교하였다. 본 연구에서 도출된 관계식은 향후 Generalized Least Square 회귀식을 이용하여 홍수분포의 지역 매개변수를 추정하기 위해 활용성이 클 것으로 기대한다.

• Korean Journal of Microbiology
• /
• v.26 no.4
• /
• pp.348-354
• /
• 1988

A Protozoa, Tetrahymena sp. was isolated from domestic wastewater and identified by morphological characteristics. It was 50 to $70{\mu}m$ in length, ovoidal shape, and divided by binary fission. When Escherchia coli was fed as a food microorganism, the optimal conditions for growth were 30 to $35^{\circ}C$, pH 7 to 9 and 0.05% NaCl. The growth was inhibited by heavy metal ions; 0.3 mg of $Cd^{++}/l$ and 0.1mg of $Cu^{++}/l$. While, it was not inhibited up to 0.7 mg of $Zn^{++}/l$.