• 한국표면공학회지
• /
• 제44권5호
• /
• pp.226-231
• /
• 2011

Graphene was coated on STS 316L by electro spray coating method to improve its properties of corrosion resistance and contact resistance. Exfoliated graphite (graphene) was made of the graphite by chemical treatment. Graphene is distributed using dispersing agent, and STS 316L was coated with diffuse graphene solution by electro spray coating method. The structure of the exfoliated graphite was analyzed using XRD and the coating layer of surface was analyzed by using SEM. Analysis showed that multi-layered graphite structure was destroyed and it was transformed into fine layers graphene structure. And the result of SEM analysis on the surface and the cross section, graphene layer was uniformly formed with 3~5 ${\mu}m$ thickness on the surface of substrate. Corrosion resistance test was applied in the corrosive solution which is similar to the PEM fuel cell stack inside. And interfacial contact resistance test was measured to simulate the internal operating conditions of PEM fuel cell stack. The results of measurements show that stainless steel coated with graphene was improved in corrosion resistance and surface contact resistance than stainless steel without graphene coating layer.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.237-243
• /
• 2010

본 논문에서는 수치해석과 공압실험으로 핀틀 로켓에 적용된 핀틀 형상이 추력과 항력에 미치는 영향을 분석 하여 제시하였다. 핀틀 움직임으로 노즐목 면적이 감소할 때 연소실 압력은 부드럽게 증가한다. 그리고 핀틀 몸체의 압력에 의한 추력은 연소실 압력에 비례하여 증가하였으며 노즐 벽면 압력에 의한 추력 보다 큰 값을 가졌다. 그리고 노즐 내부의 충격파가 핀틀 형상과 압력비에 따라 변하기 때문에 노즐 벽면 압력에 의한 추력은 연소실 압력에 무관하였다. 핀틀에 의한 항력은 연소실 압력과 무관하게 완전히 선형적인 핀틀 형상에 서 최소 크기를 가졌다.

• 한국항공우주학회지
• /
• 제37권6호
• /
• pp.519-526
• /
• 2009

본 논문에서는 커나드와 테일핀을 가진 지대지 유도미사일이 대기권을 비행할 때 최대 사거리를 갖기 위한 효율적인 외형 형상 최적화 기법 연구에 대하여 기술하였다. 이를 위하여 비행궤적 해석 기법과 최적화 기법을 연계하여 미사일의 사거리 증대를 위한 외형 형상 최적화 전산 프로그램 시스템을 구축하였다. 비행궤적 해석부분에서는 반실험적 기법을 이용한 공력해석프로그램인 Missile DATCOM을 직접 연결하여 운동방정식 계산에 필요한 공력계수들을 계산 시간 단계 마다 효율적으로 제공할 수 있게 하였고 최고점 이후의 활공비행 구간에서는 최대 양항비를 갖는 Trim 조건 계산 모듈을 첨가하여 활공비행전 영역에서 최대 양항비 상태에서 지속적으로 비행한다는 가정으로 계산 하였다. 최적화 기법으로는 Response Surface Method(RSM)를 적용하여 계산 시간 효율화를 꾀하였다.

• 대한건축학회논문집:계획계
• /
• 제35권8호
• /
• pp.3-14
• /
• 2019

The research is to track the morphological transformation of residential towers of apartment complexes in Busan. Though apartment is one of the most important components in Korean society, it has not drawn enough attention from academia as well as the public, especially regarding its shape. In result, its morphological change has barely been recognized. Instead, negative, but superficial, evaluation has become dominant tendency to deal with the shape of apartment tower. There are numerous 'partial' evidences to inform the morphological change of apartment plan type, and understanding the change is critical since morphological resultant reflects culture, politics, economy of a society. The research has been done on the 261 apartment complexes built through 2016 in Busan. The analysis shows that $I^0$ type, to represent 'typical boring architectural shape' of Korean apartments, has been dominant until the year 2000. However, its portion has become drastically decreased since the mid-2000. Composite plan type, the geometrical precedents of which had never been existent, emerged in the mid-2000, and this phenomenon may symbolize the change of morphology of apartment. When tower plan types are grouped together according to geometrical shape, three types, I-type, L-type and Y-type, take the most of residential towers, explaining 97% of the total. As expected, I-type is the most dominant, but its influence has decreased as time passes. Y-type might become one of the most important type in the period V. L-type has become the leading type in the Period VI to exceed I-type by 12 percent.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.1029-1036
• /
• 2014

3D 스캐닝을 이용한 3D 형상정보를 구축하기 위해서는 피측정물의 촬영부터 시작하여 획득된 데이터의 합성과정까지 여러 단계를 거치는데, 이는 많은 시간과 복잡하며 번거로운 수작업을 요구한다. 본 연구에서는 복잡하고 많은 시간이 소요되는 과정에서 생기는 불필요한 준비과정이나 진행단계별 수작업 요소들을 자동화하여 작업자의 숙련도에 따라 발생하는 데이터 품질의 차이를 최소화 할 수 있도록 하였으며, 작업자의 실수로 인해 발생하는 데이터의 부재를 사전에 예방 할 수 있어 결과적으로 3D 스캐너를 통한 3 차원데이터 획득과정의 시간적, 데이터적 효율성과 형상정밀도를 증가시킴을 증명하였다.

• 농업과학연구
• /
• 제46권4호
• /
• pp.1007-1018
• /
• 2019

In the present study, according to morphological observations followed by recent circumscriptions, we have classified the Korean taxa of the family Linderniaceae into Scrophulariaceae sensu lato has been considered in several works, though the taxa have remained undefined because identification work was mostly done according to vegetative morphological features, such as the leaf shape, leaf margins, and leaf venation. The taxa of Linderniaceae are mostly considered to be weeds and, for correct identification, it is necessary to clarify their taxonomic characteristics. Morphological studies were carried out using samples collected in the field. Micro-morphological observations of the vegetative and floral parts were also performed using light microscopy (LM) and scanning electron microscopy (SEM). We concluded that important characteristics are reproductive morphologies viz. calyx, stamen structure, capsule shape, calyx ratio with capsule, inflorescence morphology, and seed morphology. As a result, we formulated taxa descriptions and provided a key of the genera of Linderniaceae in Korea. Lindernia crustacea (L.) F. Muell. is transferred to Torenia crustacea (L.) Cham. & Schltdl. Lindernia micrantha D. Don and L. angustifolia (Benth.) Wettstein are a synonym of Vandellia micrantha (D. Don) Eb. Fisch., Schäferh. & Kai Müll. Lindernia attenuata Muhl. and L. dubia var. major (Pursh) Pennell are a synonym of Lindernia dubia (L.). Lindernia verbenifolia (Colsm.) Pennell is a synonym of Bonnaya antipoda Druce. Our study reports the presence of four genera: Bonnaya, Lindernia, Torenia, and Vandellia, comprising six taxa under the family Linderniaceae in Korea.

• 한국수산과학회지
• /
• 제46권3호
• /
• pp.296-302
• /
• 2013

The effects of temperature on spore release, growth and photosynthetic efficiency of Lithophyllum yessoense and Hildenbrandia rubra were examined. L. yessoense was collected at Galnam and H. rubra was collected at Gyeokpo, Korea. The experimental temperatures were different for spore release (10, 15, $20^{\circ}C$), sporeling growth (10, 15, 20, 25, $30^{\circ}C$) and photosynthetic efficiency (10, 15, 20, $25^{\circ}C$). All other culture conditions were the same: 34 psu, 12:12 LD and $50{\mu}mol$ photon $m^{-2}s^{-1}$. Spore liberation was maximal at $10^{\circ}C$ for L. yessoense and at $20^{\circ}C$ for H. rubra. After 14 days, the surface area of L. yessoense was 0.031 $mm^2$ at $25^{\circ}C$ and for H. rubra was 0.032 $mm^2$ at $20^{\circ}C$. Sporelings of L. yessoense were a dark-red color and grew in a round shape. In contrast, H. rubra was bright pink and changed from a round shape in the early growth stage to later become flabelliform. Photosynthetic efficiency was highest between $20-25^{\circ}C$ in both species. In conclusion, L. yessoense and H. rubra display different physiological features based on the optimal temperatures for spore release and sporling growth.

• Korea-Australia Rheology Journal
• /
• 제15권4호
• /
• pp.197-208
• /
• 2003

Two measures of distributive mixing are examined: the standard deviation $\sigma$ and the maximum error E, among average concentrations of finite-sized samples. Curves of E versus sample size L are easily interpreted in terms of the size and intensity of the worst flaw in the mixture. E(L) is sensitive to the size of this flaw, regardless of the overall size of the mixture. The measures are used to study distributive mixing for time-periodic flows in a rectangular cavity, using the mapping method. Globally chaotic flows display a well-defined asymptotic behavior: E and $\sigma$ decrease exponentially with time, and the curves of E(L) and $\sigma$ (L) achieve a self-similar shape. This behavior is independent of the initial configuration of the fluids. Flows with large islands do not show self-similarity, and the final mixing result is strongly dependent on the initial fluid configuration.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.103-111
• /
• 2009

This study is to help make-up and coordination for image-making after analysis of facial color and shape of elderly women. The data was analyzed 55-75 years old 212 elderly women's face color and pictures by means of SPSS 12.0 statistics package. On the basis of the colorimetric data on face by Minolta CM2500D, this research considered the analysis of facial color, patternization of facial color and its analysis by age group; for the analysis of facial shape, this research patternized facial shape and analyzed its characteristic using both contour-based facial shape analysis and Kamata facial shape analysis. As for facial color, it was found that the lower age bracket has bright and reddish face, looking fine, while the higher age bracket has a conspicuously yellowish face, looking bad. The community of facial color is classified as 3 types and it was found out that the facial color of the subjects belonging to Type 3, whose L value is the largest, looked the brightest; the face of the subjects belonging to Type 2, whose a value is the largest, was much tinged with red, and the face of the subjects belonging to Type 1, whose b value is the largest were tinged with yellow. According to the analysis of facial shape, there appeared oval & long forms in the classification by contour, while there appeared a lot of downward-directed power and inner-directed power in the classification by Kamata, which is believed to reflect the phenomenon that their chin line becomes roundish and the facial length also tend to be longer due to aging.