• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.761-768
• /
• 2013

New warheads are designed and developed to be highly lethal when used as part of ballistic missile payloads. There are many trades associated with the design of a central warhead core, mainly dealing with the projectiles or penetrators. Obviously, a payload-type configuration is very susceptible to kills from one projectile because of the high impacts required for bomblet or submunition payloads. Based on these requirements, the optimum kill vehicle configuration will have the smallest mass and relative velocity that will kill all the submunitions. The designs of the penetrator shape and size are directly related to the space and weight of the warhead. The shape, size, L/D, penetrator material, and manner in which they are inserted inside the surrounding explosive segments are critical in achieving successful penetrator design. The AUTODYN-3D code was used to study the effect of penetrator penetration. The objective of numerical analysis was to determine the penetration characteristics of the penetrator produced by hypervelocity impacts under different initial conditions such as initial velocity, shape, and L/D of the penetrator.

• Cross-Cultural Studies
• /
• v.24
• /
• pp.170-183
• /
• 2011

This study explored how a Chinese college student who previously had not reached a threshold level of Korean proficiency used L1 (Chinese) and L2 (English) as a tool to socialize into Korean (L3) culture of learning over the course of study. From a perspective of language socialization, this study examined the cross-linguistic influence of L1 and L2 on the L3 acquisition process by tracing an approach to language learning and practices taken by the Chinese student as a case study. Data were collected through three methods; interview protocols, various types of written texts, and observations. The results showed that the student used English as a means to negotiate difficulties and expertise by empowering her L2 exposure during the classroom practices. Her ways of using L2 in oral practices could be characterized as the 'Inverse U-shape' pattern, under which she increased L2 exposure at the early stage of the study and shifted the intermediate language to L3 at the later stage of the study. When it comes to the language use in written practices, the sequence of "L2-L1-L3" use gradually changed to the "L2-L3" sequence over time, signifying the importance of interaction between L2 and L3. However, the use of her native language (L1) in a Korean-speaking classroom was limited to a certain aspect of literacy practices (i.e., vocabulary learning or translation). This study argues for L2 communication channel in cross-cultural classrooms as a key factor to determine sustainable learning growth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.75-82
• /
• 2015

An experimental study has been carried out to examine development length effects for high strength headed deformed bars. Current design codes limit the specified yield strength of headed bars to 400 MPa. Such the limit is due to the lack of experimental studies on headed bars made of high strength materials. Thus a test program was planed with headed bars with the yield strength of 600 MPa. The threaded head type with head shapes of round plate and circular cone was selected in this study. The experimental variables were development length, number of bars, and head shape. Specimens were classified into L-type and S-type depending on the development length. The development length of L-type was computed according to the design code without considering the limit. S-type specimens had shorter development lengths than the L-type. Further classification was made depending on the shape of heads. A-types have the head shape of round plate and B-types have the shape of circular cone. Three L-type specimens were fabricated with the variable of number of bars (1, 2, and 3). Four specimens for each of SA and SB types were made with development lengths of 50%, 45%, 40%, and 35% compared with L-type. Pullout tests was carried out with 11 specimens. The test results were compared with computed strengths with the design code equations (Appendix II). Based the current studies, it can be said that high strength headed deformed bars used in this study be able to provide such strengths computed with the current design code without considering the yield strength limit.

• Animal cells and systems
• /
• v.16 no.3
• /
• pp.254-259
• /
• 2012

The riffle beetle genus Leptelmis is newly recorded in the Korean fauna with descriptions of two new species, L. coreana, n. sp. and L. ochra, n. sp. Dorsal habitus and line-drawings of diagnostic characters are provided. The adults of L. coreana and L. ochra are similar to those of L. gracilis Sharp or L. parallela Nomura in general appearance, but can be distinguished by the absence of apical spurs on the middle and hind tibiae, light brown body color, smaller body size, and the shape of aedeagus apex. Leptelmis coreana can be distinguished from L. ochra by the absence of hindwings, lack of prominent humeri and wider elytra in posterior portion. Adults of both species occur in lowland streams and large rivers, but L. ochra were encountered relatively infrequently.

• Journal of the Korean housing association
• /
• v.16 no.1
• /
• pp.73-79
• /
• 2005

The ventilation efficiency of apartment housing bathroom has been measured by the flexible's diameter, length, and installation format to the exhaust In. The gas density attenuation method of Tracer Gas Method has been specifically utilized for this measurement. Full size mock-up of apartment housing bathroom, which was approximately $100 m^2$ in size, has been established for the ventilation emciency measurement. In addition, the ventilation efficiency has been studied by the possibility of air-supply In. The diameters of flexible are 100 mm, 125 mm, and 150mm. It also have the length of 1.0m, and 1.5 m. The installation formats are I shape, L shape, and S shape. As a result of this measurement, the flexible which has the highest ventilation efficiency was the one has bigger diameter, short in length, and I shape installation format.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.27-34
• /
• 2001

This paper discussed the shape effect of ceramic support carrier in order to facilitate biomass immobilization. The shape of ceramic support carrier was modified hollow pipe type into hollow gear type. After seeding, microorganisms were attached in crevices where protection from shear forces or surfaces where easy to contact with support carrier surface. In case of hollow gear type carrier, initial attachment rate was faster than that of hollow pipe type and obtained thick biofilm. Synthetic wastewater(COD:75~880 mg/L, organic loading rate:0.36~4.22 kgCOD/㎥.d) was treated aerobic fixed bed biofilm reactor where 100% of the volume was filled with the ceramic carrier. COD removal efficiency of reactor filled with gear type support carrier was a little high withing 70 days, and then showed similar removal efficiency. It was found that highly loaded operation with up to 4.22 kgCOD/㎥.d was possible in both reactor. Total biomass amounts of pipe type was higher than gear type, however, attached biomass of gear type was higher than that of pipe type.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1451-1464
• /
• 2015

Recently, in recognition of their outstanding structural performance, the use of Concrete Filled Steel Tube (CFT) columns has been increased. New shape welded built-up square tube was developed by the authors for broader usability using thin steel plates which were bent to be L-shaped (Channel) and each unit members were welded to form square steel tube as an cost-efficient use of expensive steel. In addition, since the rib placed at the center of the tube width acts as an anchor; higher load capacity of buckling is achievable. In order to apply the new shape built-up square columns, the structural behavior and stress distribution with parameter width of thickness (b/t), with and without rib were predicted. The New shape welded built-up square tube effectively delayed the local buckling of the steel tube, which led to a greater strength and ductility than regular HSS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.639-642
• /
• 1997

A cylindrical cam with a translation roller follower provides to transfer the translation motion and it s very useful mechanism in the automation. But. it's very difficult that the shape is defined accurately. This paper, proposes a new shape design method of the cylindrical cam with translation roller follower using the relative velocity method[l]. The relativc velocity method lculates the relative velocity of the follower versus the cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematical constraints. Finally, we present an example in order to prove the accuracy of the proposed methods.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.1
• /
• pp.3-9
• /
• 1983

Due to the wide and effective use of sucker controlling chemicals, gentic studies on the suckering habits of tobacco plants have long been neglected. So, to investigate the genetic basis of suckering, crosses between "Little Dutch" and "Cuban" were made, and subsequent generations, $F_1F_2,\;BC_1,\;BC_2,$ and parents were grown on the field. Several morphological characters were measured and the relation among them were analyzed. Correlation coefficients between leaf shape and sucker leaf shape, and the number of suckers and sucker weight were 0.25 and 0.42, both sighificant at 1 % level. But negative correlation between number of suckers per plant and that of leaves was observed, though statistically not significant. Dominance was observed in the number of suckers and amount of suckers produced, and the heritability of sucker shape was calculated as high as 0.88. And two paris of genes seemed to be involved in the inheritance of sucker shape, and narrow leaf appeared as dominant in the $F_1$.inant in the $F_1$.

• Journal of Environmental Science International
• /
• v.20 no.5
• /
• pp.623-630
• /
• 2011

This study investigated the degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) by using dielectric barrier discharge (DBD) plasma. The DBD plasma reactor of this study consisted of a quartz dielectric tube, titanium discharge (inner) and ground (outer) electrode. The effect of shape (rod, spring and pipe) of ground electrode, diameter (9~30 mm) of ground electrode of spring shape and inside diameter (4~13 mm) of quartz tube, electrode diameter (1~4 mm), electrode materials (SUS, Ti, iron, Cu and W), height difference of discharge and ground electrode (1~15.5 cm) and gas flow rate (1~7 L/min) were evaluated. The experimental results showed that shape of ground electrode and materials of ground and discharge electrode were not influenced the RNO degradation. The thinner the diameter of discharge and ground electrode, the higher RNO degradation rate observed. The effect of height gap of discharge between ground electrode on RNO degradation was not high within the experimented value. Among the experimented parameters, inside diameter of quartz tube and gas flow rate were most important parameters which are influenced the decomposition of RNO. Optimum inside diameter of quartz tube and gas flow rate were 7 mm and 4 L/min, respectively.