• Nutrition Research and Practice
• /
• v.10 no.4
• /
• pp.442-447
• /
• 2016

BACKGROUND/OBJECTIVES: College students are in a period of transition from adolescence to adulthood, in which proper dietary habits and balanced nutritional intake are very important. However, improper dietary habits and lifestyles can bring several health problems. This study was performed to investigate blood lipid profiles, blood aluminum and mercury in college students and the relationships among them. SUBJECTS/METHODS: The subjects were 80 college students (43 males and 37 females) in Gyeonggi-do. General characteristics, anthropometric measurements, blood pressure, blood lipids, SGOT, SGPT, and blood aluminum and mercury of the subjects were measured and analyzed, and their relationship was studied. RESULTS: The BMI was significantly higher in males, $23.69{\pm}3.20kg/m^2$, than in females, $20.38{\pm}2.37kg/m^2$ (P < 0.001). The blood pressure was significantly higher in males with $128.93{\pm}12.92mmHg$ systolic pressure and $77.14{\pm}10.31mmHg$ diastolic pressure compared to females with $109.78{\pm}11.97mmHg$ and $65.95{\pm}6.92mmHg$, respectively (P < 0.001). HDL cholesterol in males, $61.88{\pm}13.06mg/dl$, was lower than $64.73{\pm}12.16mg/dl$ in females, but other blood lipid levels were higher in males. Blood aluminum was significantly higher in males, $9.12{\pm}2.11{\mu}g/L$, than in females, $8.03{\pm}2.14{\mu}g/L$ (P < 0.05), and blood mercury was higher in males, $3.08{\pm}1.55{\mu}g/L$, than in females, $2.64{\pm}1.49{\mu}g/L$. The blood lipids showed positive correlation with obesity and blood pressure. CONCLUSIONS: The degree of obesity, blood pressure, triglycerides, and LDL cholesterol were higher in males, suggesting possible association with chronic disease incidence such as hyperlipidemia and hypertension. Thus, it is considered that a systematic health education is needed for college students, especially for males.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.67-75
• /
• 1986

This paper introduces the nonlinear Stream Function Wave Theory for design waves efficiently to compute the wave energy and energy transport quantities and to analyze the effects of nonlinearities on them. The Stream Function Wave Theory was developed by Dean for case of the observed waves with assymmetric wave profiles and of the design waves with symmetric theoretical wave profiles. Dalrymple later improved the computational procedure by adding two Lagrangian constraints so that more efficient convergence of the iterative numerical method to a specified wave height and to a zero mean free surface displacement resulted. And the Stream Function coefficients are computed numerically by the improved Marquardt algorithm developed for this study. As the result of this study the effects of nonlinearities on the wave quantities of the average potential energy density, the average kinetic energy density result in overestimation by linear wave theory compared to the Stream Function Wave Theory and increase monotonically with decreasing $L^*/L_O$ and with increasing $H/H_B$. The effects of nonlinearities on the group velocity and the wavelength quantities result in underestimation by linear wave theory and increase monotonically with increasing $H/H_B$. Finally the effect of nonlinearity on the average total energy flux results in overestimation for shallow water waves and underestimation for deep water waves by linear wave theory.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.559-565
• /
• 2021

This study aimed to optimize gamma-aminobutyric acid (GABA) production by employing five strains of lactic acid bacteria (LAB) that were capable of high cell growth and GABA production using a modified synthetic medium. GABA production in the strains was qualitatively confirmed via detection of colored spots using thin layer chromatography. Lactobacillus plantarum SGL058 and Lactococcus lactis SGL027 were selected as the suitable strains for GABA production. The conditions of the carbon and nitrogen sources were determined as 5 g/l glucose (L. plantarum SGL058), 5 g/l lactose (L. lactis SGL027), 10 g/l yeast extract (L. plantarum SGL058), and 20 g/l yeast extract (L. lactis SGL027) for GABA production. The cell growth, monitored by optical density at 600 nm, was 5.93 for L. plantarum SGL058. This value was higher than the 3.04 produced by L. lactis SGL027 at 36 h using a 5-L fermenter. The highest concentration of GABA produced was 546.7 ㎍/ml by L. plantarum SGL058 and 404.6 ㎍/ml by L. lactis SGL027, representing a GABA conversion efficiency of (%, w/w) of 4.0% and 3.4%, respectively. The fermentation profiles of L. plantarum SGL058 and L. lactis SGL027 provide a basis for the utilization of LAB in GABA production using a basal synthetic medium.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.286-292
• /
• 2007

Free amino acids and volatile compounds of fresh garlic and its liqueur were investigated to search elution profile of those components as basic data for development of garlic liqueur. The garlic was soaked in 20% alcohol solution and then sampled every week for 5 weeks. The major free amino acids were L-aspartic acid, L-glutamic acid, L-arginine, L-alanine, L-proline, L-asparagine and L-serine. Neutral amino acids such as L-threonine, L-proline, L-valine and L-leucine, and aromatic amino acids such as tyrosine and phenylalanine were eluted over 80% of those content in fresh garlic after 3 weeks of soaking, but acidic, basic and sulfur containing amino acids were below 80% even after 5 weeks. Sulfide compounds such as diallyl trisulfide, diallyl disulfide, methyl allyl disulfide, 2-vinyl-4H-1,3-dithi in, 3-vinyl-3,4-dihydro-1,2-dithiin, 3,5-diethyl-1,24-trithiolane, isobutyl isothiocyanate and diallyl sulfide were identified as major volatile compounds of fresh garlic by using GC/MS. Among volatile compounds of fresh garlic, allyl alcohol, diallyl disulfide, 3,5-diethyl-1,2,4-trithiolane, diallyl trisulfide and 3,4-dimethoxy furan were eluted to liqueur, but those compounds except 3,5-diethyl-1,2,4-trithiolane were lowered in liqueur during soaking. Furfural, 5-methylfurfural, 5-hydroxymethylfurfural, dimethyl pyrazine, furfuryl alcohol, 3-hydroxy-2-bytanone and 2,3-dihydro-3,5-dihydroxy-6-methyl-4H-pyr-an-4-one were generated newly and their content increased in liqueur during soaking.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.9
• /
• pp.1185-1192
• /
• 2012

This study investigated the hydrocarbonoclastic microbial community present on weathered crude oil and their ability to degrade weathered oil in seawater obtained from the Gulf St. Vincent (SA, Australia). Examination of the native seawater communities capable of utilizing hydrocarbon as the sole carbon source identified a maximum recovery of just $6.6{\times}10^1\;CFU/ml$, with these values dramatically increased in the weathered oil, reaching $4.1{\times}10^4\;CFU/ml$. The weathered oil (dominated by > $C_{30}$ fractions; $750,000{\pm}150,000mg/l$) was subject to an 8 week laboratory-based degradation microcosm study. By day 56, the natural inoculums degraded the soluble hydrocarbons (initial concentrations $3,400{\pm}700mg/l$ and $1,700{\pm}340mg/l$ for the control and seawater, respectively) to below detectable levels, and biodegradation of the residual oil reached 62% ($254,000{\pm}40,000mg/l$) and 66% ($285,000{\pm}45,000mg/l$) in the control and seawater sources, respectively. In addition, the residual oil gas chromatogram profiles changed with the presence of short and intermediate hydrocarbon chains. 16S rDNA DGGE sequence analysis revealed species affiliated with the genera Roseobacter, Alteromonas, Yeosuana aromativorans, and Pseudomonas, renowned oil-degrading organisms previously thought to be associated with the environment where the oil contaminated rather than also being present in the contaminating oil. This study highlights the importance of microbiological techniques for isolation and characterisation, coupled with molecular techniques for identification, in understanding the role and function of native oil communities.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.419-425
• /
• 2020

In this paper, when a refractive index grating and a gain grating are simultaneously present in a DFB (Distributed Feedback) laser for a 1.55 um wavelength with two mirror surfaces without an anti-reflective coating, an analysis program was developed to determine the beam distribution of the oscillation mode in the longitudinal direction. As the phases of the index and gain gratings on the mirror faces are varied, the lasing gain and the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/P_r are analyzed and examined in case of δL<0. In order to reduce the threshold current of a oscillation mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phase values at the mirror surface.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.368-375
• /
• 2005

Batch cultures were carried out to optimize the exo-polysaccharide production by liquid cultures of Pleurotus ferulae. Among the various carbon sources, when $5\%$ of glucose was used, the maximum mycelial growth and exo-polysaccharide concentration reached were 8.78 g/l and 3.59 g/l, respectively. Yeast extract and polypeptone were identified as the most suitable nitrogen sources. In particular, when a mixture of $1\%$ of polypeptone and $0.8\%$ of yeast extract was used, 9.52 g/l of mycelial growth and 4.09 g/l of exo-polysaccharide were obtained. In the case of mineral sources, K$_2$HPO$_4$ and MgSO$_4$$\codt$7H$_2$0 were found to be the best mineral sources for mycelial growth and exo-polysaccharide production. Under the optimized culture conditions, the agitation speed and aeration were investigated for mycelial growth and exo­polysaccharide production in a jar fermentor. The maximum mycelial growth and exo-polysaccharide concentration at 1.5 vvm and 200 rpm obtained were 13.2 g/l and 4.95 g/l, respectively, after 10 days of culture, which were $76\%$ and $79\%$ higher than those of the basal medium. The specific growth rate was decreased with the increase of mycelial growth. However, the specific production rate of the exo-polysaccharide was proportionally increased with the specific growth rate. The proposed model profiles showed good agreement with the experimental results for the mycelial growth and exo-polysaccharide production. The specific production rate using the optimized medium was higher than that of basal medium.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.43-47
• /
• 2006

Ginseng (Panax ginseng CA. Meyer) hairy root cultures, which are established via the infection of ginseng root discs with Rhizobium rhizogenes, have been used to construct profiles of both biomass growth and nutrient consumption in flask cultures. In a 250 mL shake flask culture, the maximum biomass was observed on the 59th day of the culture period, at 216.8 g (fresh wt) per liter or 11.4 g (dry wt) per liter. The hairy roots were determined to have a growth rate of 0.355 g-DW/g cells/day during the exponential growth phase and a maximum specific growth rate on day 7. Total ginseng saponin and phenolic compound contents were noted to have increased within the latter portion of the culture period. Linear correlations between increases in biomass weight and nutrient uptake were used to imply the conductivity yield $2.60g-DW/(L{\cdot}mS)$ and carbon yield 0.45 g-DW/(g sugar) in the 250 mL flask cultures. The biomass yield when two different nitrogen sources were used (ammonia and nitrate) was shown to remain approximately constant. at $0.47g-DW/(L{\cdot}mM\;NH_4$) and $0.33g-DW/(L{\cdot}mM\;NO_3$); it remained at these levels for 16 days with the ammonia. and for 24 days with the nitrate. The biomass yield when a phosphate source was used was also shown to remain approximately constant for 9 days, at $3.17g-DW/(L{\cdot}mM\;PO_4$), with an $R^2$ of 0.99.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.555-559
• /
• 1997

The three different batches of an oral sustained release melatonin (MT) delivery system were prepared by aqueous-based fluid-bed coating of the sugar spheres for the evaluation of in vitro release characteristics and plasma concentration profiles in human subjects. The MT contents in 20% coated sugar spheres of three batches (B1, B2 and B3) were $3.3{\pm}0.08$, $2.4{\pm}0.1$ and $2.5{\pm}0.13$ mg per gram of coated sugar spheres, respectively. The release profiles of three different batches had a very similar fashion. However, the release profiles of three different batches had a very similar fashion. However, the release half-lives $(T_{50%})$ of MT from B1, B2 and B3 was $3.70{\pm}0.2$, $5.2{\pm}0.2$ and $4.9{\pm}0.07h$, respectively. Plasma concentration profiles of sustained release 0.2mg melatonin-loaded sugar spheres containing 10% immediate release melatonin in gelatin capsules (B1 and B2) were then evaluated in human subjects. The in vivo plasma concentration profies of the two batches (B1 and B2) were very similar each other and located between the physiological endogenous ranges. The time to reach the peak concentration $(T_max)$ was more advanced in case of B1 when compared to B2. However, there was no statistically significant difference in the maximum concentration $(C_max)$ and the area under the curve (AUC) between B1 and B2. The AUC of melatonin-loaded sugar spheres containing 10% and 20% immediate release MT in human subjects had a good linearity between dose and AUC, regardless of the fraction of immediate release MT, indicating the first order elimination process of MT within these doses. The current oral sustained release MT delivery system may be utilized to treat circadian rhythm disorders if it is proven to be more clinically useful when compared to immediate release MT.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.549-556
• /
• 2010

In general, materials that can be used to form elastic pads, such as urethane and rubber, are often used in flexible forming processes by inserting the pads between a blank and flexible die for smoothing the forming surface that is formed by a reconfigurable die. In this study, the effects of the elastic pad on formability in the flexible forming process for sheet metals are investigated by performing numerical simulations. In the simulation, the hyperelastic material model is used, where the urethane elastic pads serve as elastic cushions. Case studies are carried out for elastic materials with different hardness values and thicknesses. The results are used to evaluate formability by comparing the configuration of the deformed blank and its major cross-sectional profiles. It is verified that the elastic pad used in the flexible forming process for sheet materials should be hard and that its thickness should be chosen appropriately.