• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1034-1042
• /
• 2010

This study investigates effects of three different parameterizations of vertical mixing scheme on upper ocean simulation of the East Sea, focusing on the seasonal variations of the sea surface temperature(SST) and the mixed layer depth(MLD) using an ocean general circulation model(GFDL MOM1.1). The considered vertical mixing schemes are the Laplacian scheme(L scheme) that use a constant eddy coefficient, the Mellor-Yamada scheme(MY scheme), and a new scheme(Noh scheme). The Noh scheme, a second-order turbulence closure, was developed considering recent observational evidences such as the enhancement of turbulent kinetic energy near the sea surface. During summer L scheme underestimates the SST, while MY scheme overestimates the SST, compared to climatological SST. Noh scheme produces the SST in better agreement with climatological one. During winter all schemes overestimate the SST up to $4^{\circ}C$ compared to climatological SST. Vertical profiles of the basin-mean temperature show that L scheme produces higher temperature below the thermocline than those of other schemes. The winter MLD simulated from L scheme is rather large compared to that from other schemes, but the differences in MLD during summer are not significant.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1566-1574
• /
• 1992

Local heat transfer characteristics for a round air jet impinging normally on a heated flat plate were experimentally investigated. The problem parameters investigated were jet Reynolds number, Re=4000,10000, and 20000, and nozzle-to-plate spacing(L/D) of 2,6, and 10. The temperature variations on the flat uniform heat flux surface were mapped using a thermo-sensitive liquid crytal sheet. The isochromatic images corresponding to the characteristic temperature of liquid crystal were analyzed with the help of a digital image processing system. The local Nusselt number, Nu decreased rapidly in the impingement region and exhibited a similar profiles in the wall jet region independent of the nozzle-to-plate spacing L/D. In the case of large Reynolds number, heat transfer rate (Nu) was proportional to 0.5 power of the Reynolds number. For L/D=2, a secondary peak in the heat transfer rate was seen in the region of X/D=1.5~3 due to the transition from laminar to turbulent boundary layer.

• Korean Journal of Pharmacognosy
• /
• v.49 no.2
• /
• pp.132-137
• /
• 2018

This study was conducted to investigate the effects of dietary Allium hookeri on growth performance, bone strength, and blood biochemical profiles in growing broiler chickens. Twelve hundreds of one-day old Arbor Acres male broilers were divided into 6 treatments with 4 replicates and 50 birds per replicate (n=200 chicks/treatment). Chickens fed basal diet (Control), basal diet with commercial X (Positive control) at 0.05% of diet, or each one of the experimental diets (L3, L5, R3, R5) supplemented with the powder of A. hookeri leaf or root at 0.3 and 0.5% of diet respectively for 5 weeks. At the 5th week of feeding the diets, body weight, tibia strength, and blood biochemical profiles including antibody titers were measured. Dietary A. hookeri (L3, L5, R3, R5) significantly increased final body weight than the control group. And the dietary leaf of A. hookeri effectively increased the growth performance than dietary root of A. hookeri. Interestingly dietary leaf of A. hookeri improved tibia strength than the control group and L3 showed the highest value. The antibody titers against infectious bursal disease (IBD) increased with the addition of dietary leaf of A. hookeri compared with positive control, R3, and R5 groups. But there was no significant difference in serum biochemical parameters such as albumin, globulin, glucose, cholesterol, Ca, P, total protein, total bilirubin, alanine aminotransferase, alkaline phosphatase, and gamma-glutamyl transferase. These results suggest that A. hookeri can be used as a good supplement to improve growth performance and health by increasing bone strength and antibody titer against IBD without any anti-nutritional or toxic effects in growing broilers.

• Journal of Nutrition and Health
• /
• v.39 no.8
• /
• pp.728-732
• /
• 2006

In this study, the effects of corn peptide consumption on plasma lipid profiles were investigated in high cholesterol diet-fed rats. Male Sprague-Dawley rats (n = 21) were fed with corn peptide-free (control) diet, diets containing 2% or 5% com peptide for 5 weeks. Hypercholesterolemia was induced by adding l% cholesterol and 0.5% cholic acid to all diets. No difference was found in food intake and body weight gain among groups. The corn peptide treated groups showed significant improvement in the plasma level of HDL-cholesterol (p<0.05) compared to the control group, while the plasma total cholesterol and LDL-cholesterol were not affected.5oio corn peptide supplemented diet reduced plasma level of triglycerides (p<0.05) The atherogenic index was decreased in the corn peptide treated groups. These results suggest that consumption of corn peptide may lead to an amelioration of metabolic syndrome as well as a reduction of cardiovascular disease and hyperlipidemia through increasing the level of HDL-cholesterol, and decreasing the level of triglycerides in plasma.

• Journal of the Korean earth science society
• /
• v.25 no.4
• /
• pp.270-276
• /
• 2004

Multi-channel Analysis of Surface Waves (MASW) and Seismic Cone Penetration Test (SCPT) have been recently developed to obtain S-wave velocity profiles which were conventionally investigated by a down-hole seismic survey. For unconsolidated sedimentary sites, we studied these three methods, and compared the results with a drilling log. All the methods showed that the changes in the S-wave velocities were consistent with the changes in the sedimentary facies. In addition, the SCPT was most sensitive to changes in sedimentary facies among the three profiles. The results of the SCPT showed that there exists a low velocity zone, which is mainly composed of clayey sand, at the depth of 8${\sim}$12m in the sediments.

• Geomechanics and Engineering
• /
• v.8 no.5
• /
• pp.663-674
• /
• 2015

Many seismically vulnerable regions in India and worldwide are located on deep soil deposits which extend to several hundred meters of depth. It has been well recognized that the earthquake shaking is altered by geological conditions at the location of building. As seismic waves propagates through uppermost layers of soil and rock, these layers serve as filter and they can increase the duration and amplitude of earthquake motion within narrow frequency bands. The amplification of these waves is largely controlled by mechanical properties of these layers, which are function of their stiffness and damping. Stiffness and damping are further influenced by soil type and thickness. In the current study, an attempt has been made to study the seismic site response of deep soils. Three hypothetical homogeneous soil models (e.g., soft soil, medium soil and hard soil) lying on bedrock are considered. Depth of half space is varied from 30 m to 2,000 m in this study. Controlled synthetic motions are used as input base motion. One dimensional equivalent linear ground response analyses are carried out using a computer package DEEPSOIL. Conventional approach of analysing up to 30 m depth has been found to be inadequate for deep soil sites. PGA values are observed to be higher for deeper soil profiles as compared to shallow soil profiles indicating that deeper soil profiles are more prone to liquefaction and other related seismic hazards under earthquake ground shaking. The study recommends to deal the deeper soil sections more carefully for estimating the amplification factors for seismic hazard assessment at the surface.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1028-1036
• /
• 2018

Study Design: Single-center, observational, case-control study. Purpose: Comparison and analysis of the metabolic and coagulative profiles in patients with idiopathic scoliosis, patients with congenital scoliosis, and healthy controls. Overview of Literature: Serum melatonin deficiency has been a controversial topic in the etiopathogenesis of scoliosis. Low bone mineral density, low vitamin D3 levels, and high parathyroid hormone levels are common metabolic abnormalities associated with scoliosis that may be responsible for its pathogenesis. In addition to metabolic defects, several studies have shown coagulation defects that either persist from the preoperative period or occur during surgery and usually lead to more than the expected amount of blood loss in patients undergoing deformity correction for scoliosis. Methods: The study population (n=73) was classified into those having congenital scoliosis (n=31), those with idiopathic scoliosis (n=30), and healthy controls (n=12). After detailed clinicoradiological evaluation of all the subjects, 10-mL blood samples were collected, measured, and analyzed for various metabolic and coagulation parameters. Results: The mean serum melatonin levels in patients with idiopathic scoliosis were significantly lower than those in the healthy controls. Although the mean serum melatonin level in the congenital group was also low, the difference was not statistically significant. Serum alkaline phosphatase and parathyroid hormone levels were higher in the scoliosis groups, whereas the vitamin D level was lower. No differences were observed in the coagulation profiles of the different groups. Conclusions: Low serum melatonin levels associated with scoliosis can be a cause or an effect of scoliosis. Moreover, low bone mineral density, high bone turn over, and negative calcium balance appear to play an important role in the progression, if not the onset, of the deformity.

• Journal of Environmental Science International
• /
• v.32 no.12
• /
• pp.925-932
• /
• 2023

The objective of this study was to investigate the effects of microbial additive on the meat quality and fatty acid (FA) profiles of growing-finishing pigs. A total of 180 growing-finishing pigs (Landrace × Yorkshire × Duroc; mixed sex; 14 weeks of age; 58.0 ± 1.00 kg) were randomly distributed into three treatments with three pens consisting of 20 growing-finishing pigs per pen for 60 days. The experimental treatments were as follows: 0, 0.5, and 1.0% microbial additive. The crude protein, cooking loss, drip loss, water holding capacity, and shear force in loin muscle were no significant differences among treatments (p>0.05), except for the moisture and crude fat contents. The pH and TBARS of loin muscle shown no significant differences among treatments (p>0.05). However, the L^* and a^* values of loin muscle were the highest in the 1.0% supplementation group compared with the other treatments (p<0.05). The b^* value of loin muscle was the highest in the control group compared with the other treatments (p<0.05). Linolenic acid, eicosapentaenoic acid, docosapentaenoic acid, docosahexaenoic acid, and n-3 FAs contents of loin muscle were the highest in 1.0% supplementation group compared with the other treatments (p<0.05). In conclusion, using 1.0% microbial additive supplementation can improve meat quality by increasing polyunsaturated FA concentration and meat color in pig loins.

• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.156-159
• /
• 2003

Permanent structure of photoinduced singlemode waveguide in optical fluoride glasses was demonstrated using the self-channeled plasma filament excited by a femtosecond (110 fs) Ti:sapphire laser ($λ_p$ = 800 nm). The photoinduced refractive index modification in ZBLAN glasses reached a length of approximately 10 - 15 mm from the input surface of the optical glass with the diameters ranging from 5 to 8 ${\mu}{\textrm}{m}$ at input intensities more than l.0 ${\times}$ $10^{12}$ W/$\textrm{cm}^2$. The graded refractive index profiles were fabricated to be a symmetric form from the center of an optical fluoride glass and a maximum value of refractive index change (ㅿn) was measured to be l.3${\times}$$10^{-2}$. The beam profile of the output beam transmitted through the modified region showed that the photoinduced refractive index modification produced a permanent structure of singlemode waveguide.

• Clean Technology
• /
• v.9 no.2
• /
• pp.81-85
• /
• 2003

A simple method of isotherm determination for HPLC is discussed. The equilibrium-dispersive model describing the behavior of elution peaks in HPLC for single component is solved numerically by using PDE solver Macsyma$^{(R)}$(Macsyma Inc., Arlington, MA, USA.) and compared to the experimental data obtained in overloaded isocratic chromatography with caffeine as model species. The effect of sample concentration and flow velocity on the band profiles of elution peaks are described.