• The Korean Journal of Pain
• /
• 제26권4호
• /
• pp.368-373
• /
• 2013

Background: Bertolotti's syndrome (BS), a form of lumbago in lumbosacral transitional vertebrae, is an important cause of low back pain in young patients. The purpose of this study was to assess the etiology of low back pain and the efficacy of treatment offered to patients with BS. Methods: All patients of BS Castellvi type1a during a period of 6 months were enrolled in the study. The patients underwent interventional pain procedures for diagnosis and pain relief. Response to the therapy was assessed based on VAS and ODI scores. A 50% decrease in VAS score or a VAS score less than 3 would be considered adequate pain relief. Results: All 20 patients diagnosed with BS during the 6-month observation period had scoliosis. Common causes of back pain were the ipsilateral L5-S1 facet joint, neoarticulation, the SI joint, and disc degeneration. Responses to various interventions for pain relief were different and inconsistent from patient to patient. In particular, responses to interventions for neoarticular pain were generally poor. Conclusions: Pain in patients with BS does not usually respond to interventional pain treatment. A very dynamic treatment approach must be pursued while managing BS patients, and the treatment plan must be individualized at various stages in order to obtain satisfactory pain relief.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.516-521
• /
• 2002

A study was carried out to grow an understanding of the microstructural development of friction stir welds on an AZ91D magnesium alloy, and to evaluate the mechanical properties of the welds. AZ91D plates with the thickness of 4mm were used, and the microstructural development of the weld zone was investigated using optical and scanning electron microscopes. Square butt welding joint with good quality was obtained at the conditions of under 187mm/min of travel speed with 1100 to 1250 rpm of tool rotation speed. The microstructure within the weld region consisted of fine equiaxed grains with no evidence of the original dendritic structure. The hardness tests showed slightly increased harness in the weld region, and the minimum hardness measured is in that of the parent material. Tensile strength of the weld zone was remarkably improved due to very fine recrystallized structure. XRD pattern of weld zone revealed the removal of $\beta$ intermetallic compounds, $Mg_{17}$Al$_{12}$, which had been distributed in the base metal.l.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.157-163
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ration cause decrease of joining efficiency after of GMT-Sheet, joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We have better design the structure so as not occur to stress centralization on the joining part.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.553-553
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. h this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralizatien on the joining part.

• Clinics in Shoulder and Elbow
• /
• 제3권1호
• /
• pp.26-32
• /
• 2000

Purpose : The aim of this study is the assessment of the clinical outcomes after percutanous pinning of unstable two-parts fracture of surgical neck in humerus. Materials and Methods: This study was based on thirteen cases of non-comminuted unstable surgical neck fracture of humerus among 19 cases, which followed-up more than one year. Follow-up averaged 29 months. We treated with percutaneous pinning techniques and assessed clinical outcomes. Functional evaluation was performed using the standard method of research committee of American Shoulder and Elbow Surgeons(ASES). Results: Last follow-up ROM of shoulder joint were 142 degrees of forward elevation, 57 degrees of external rotation, 72 degrees of external rotation in 90 degrees abduction, and T8 of internal rotation. Pain scale was l(range : 0∼3). ASES scores was 86.2(range : 63.3~98.3). Patient satisfaction based on ASES were excellent in 6 cases, good in 5 cases, fair in 1 case, poor in 1 case. A case of fair result was caused by limitation of motion in shoulder joint and poor case was paraplegia patient after traffic accident. Conclusion : Percutaneous pinning is recommended for non-comminuted unstable fracture of surgical neck in humerus.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.25-31
• /
• 2014

This paper details application of a DLC(Diamond Like Carbon)-coating to the swash plate and the ball joint of pistons that make sliding contact with the piston shoes of an axial piston pump. This process, aimed to reduce the frictional and leakage power losses of the hydrostatic piston shoe bearings at the low speed range. At lower speeds than 100rpm, the positive effects of the DLC-coating on the power loss reduction of the hydrostatic piston shoe bearings could be confirmed. These effects resulted in little improvement in volumetric efficiency of the test pump, but the mechanical efficiency could be raised by up to 5% at 100rpm; here, the DLC-coated swash plate played a more dominant role than the DLC-coated ball joint.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.111-119
• /
• 2001

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralization on the joining part.

• 한국해안해양공학회지
• /
• 제4권4호
• /
• pp.250-260
• /
• 1992

본 논문에서는 비교적 장기간의 조위 관측자료가 축적되어 있는 인천, 제주, 여수, 부산, 묵호에 대하여 극치확률법과 결합확률법을 이용하여 극치해면을 산정하였다. 극치확률법의 분포는 Gumbel, Weibull 및 일반화 극치(GEV)분포에 대하여 최소자승법, 모멘트법, 확률가중적률(PWM)법으로 parameter를 추정하여 극치해면을 산출하였다. 그 결과 Gumbel 분포와 최소자승법이 각각 다른 분포와 다른 parameter 추정법에 비해 크게 추정되는 경향이 있다. 그리고 결합확률법이 극치확률법 보다 대략 5-l0cm 정도 크게 나타났다. 이는 극치확률법이 tide와 surge가 동시에 발생한 조위를 사용한 반면 결합확률법은 동시 발생하지 않은 극치 tide와 극치 surge도 포함하여 극치해면을 산출하기 때문에 값이 조금 크게 추정된다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.28-33
• /
• 2008

This paper presents the characteristics of mechanical properties within the heat affected zones(HAZs) of dissimilar metal weld joint between SA508 Gr.1a and F3l6 stainless steel(SS) with Alloy 82/182 filler metal. Tensile tests were performed using small-size specimens taken from the heat affected regions close to both fusion lines of weld, and the micro-structures were examined using optical microscope(OM) and transmission microscope(TEM). The results showed that significant gradients of the yield stress(YS), ultimate tensile stress(UTS), and elongations were observed within the HAZ of SA508 Gr.1a. This was attributed to the different microstructures within the HAZ developed during the welding process. In the HAZ of F316 SS, however, the welding effect dominated the YS and elongation rather than UTS. TEM micrographs demonstrated these characteristics of the HAZ of F316 SS was associated with a dislocation-induced strain hardening.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.337-346
• /
• 2019

The present paper tries to contribute fill the gap of application of the component method to tubular connections. For this purpose, one typical joint configuration in which just one component can be considered as active has been studied. These joints were selected as symmetrically loaded welded connections in which the beam width was the same as the column width. This focused the study on the component 'side walls of rectangular hollow sections (RHS) in tension/compression'. It should be one of the main components to be considered in welded unstiffened joints between I beams and RHS columns. Many experimental tests on double-sided I-beam-to-RHS-column joint with a width ratio 1 have been carried out by the authors and a finite element (FE) model was validated with their results. Then, some different analytical approaches for the component stiffness and strength have been assessed. Finally, the stiffness proposals have been compared with some FE simulations on I-beam-to-RHS-column joints. This work finally proposes the most adequate equations that were found for the stiffness and strength characterization of the component 'side walls of RHS in tension/compression' to be applied in a further unified global proposal for the application of the component method to RHS.