• 생명과학회지
• /
• 제5권2호
• /
• pp.70-75
• /
• 1995

The effect of lipoxygenase (LOX) on the oxidation and co-oxidation of lipid fraction was studied in the model system of rainbow trout. For the reaction in model system 1 g of lipid fraction and 50mL of enzyme extract(LOX, 140 unit in 50mL phosphate buffer solution at pH 7, 4)), which were obtained from rainbow trout, were homoginized in the presence of Tween 20 and kept at 23$\circ$C for 3 days. The activity of LOX was decreased to 43% of initial level during the reaction in the model system. The initial composition of rainbow trout lipid was showed to be consisted of trigliceride(TG;82%) and free fatty acid(FFA;0.1%), while this converted to 59% of TG and 20% of FIFA, respectively after reaction in model system. Change of fatty acid composition was also observed and the content of linoleic acid, one of the major fatte acids, was decreased to 13% from 54% in the content of total fatty acids after reaction. The carotenoids in rainbow trout were composed of 0.4% $\alpha$-carotene, 1.6% $\beta$ -carotene, 80% canthaxanthin, 7% lutein and 11% zeaxanthin, thus the canthaxanthin was the major component. This canthaxanthin was the most degraded carotenoid by lipoxygenase catalyzed co-oxidation during the reaction. On the other hand the tocopherol isomers found in the rainbow trout were $\alpha$ and $\beta$ -tocopherol, and $\alpha$-tocopherol had a higher degradation rate by the lipoxygenase catalyzed co-oxidation than of $\beta$-tocopherol in the reaction of model system.

• Korean Journal of Radiology
• /
• 제2권1호
• /
• pp.28-36
• /
• 2001

Objective: To provide a systematic overview of the effects of various parameters on contrast enhancement within the same population, an animal experiment as well as a computer-aided simulation study was performed. Materials and Methods: In an animal experiment, single-level dynamic CT through the liver was performed at 5-second intervals just after the injection of contrast medium for 3 minutes. Combinations of three different amounts (1, 2, 3 mL/kg), concentrations (150, 200, 300 mgI/mL), and injection rates (0.5, 1, 2 mL/sec) were used. The CT number of the aorta (A), portal vein (P) and liver (L) was measured in each image, and time-attenuation curves for A, P and L were thus obtained. The degree of maximum enhancement (Imax) and time to reach peak enhancement (Tmax) of A, P and L were determined, and times to equilibrium (Teq) were analyzed. In the computed-aided simulation model, a program based on the amount, flow, and diffusion coefficient of body fluid in various compartments of the human body was designed. The input variables were the concentrations, volumes and injection rates of the contrast media used. The program generated the time-attenuation curves of A, P and L, as well as liver-to-hepatocellular carcinoma (HCC) contrast curves. On each curve, we calculated and plotted the optimal temporal window (time period above the lower threshold, which in this experiment was 10 Hounsfield units), the total area under the curve above the lower threshold, and the area within the optimal range. Results: A. Animal Experiment: At a given concentration and injection rate, an increased volume of contrast medium led to increases in Imax A, P and L. In addition, Tmax A, P, L and Teq were prolonged in parallel with increases in injection time The time-attenuation curve shifted upward and to the right. For a given volume and injection rate, an increased concentration of contrast medium increased the degree of aortic, portal and hepatic enhancement, though Tmax A, P and L remained the same. The time-attenuation curve shifted upward. For a given volume and concentration of contrast medium, changes in the injection rate had a prominent effect on aortic enhancement, and that of the portal vein and hepatic parenchyma also showed some increase, though the effect was less prominent. A increased in the rate of contrast injection led to shifting of the time enhancement curve to the left and upward. B. Computer Simulation: At a faster injection rate, there was minimal change in the degree of hepatic attenuation, though the duration of the optimal temporal window decreased. The area between 10 and 30 HU was greatest when contrast media was delivered at a rate of 2 3 mL/sec. Although the total area under the curve increased in proportion to the injection rate, most of this increase was above the upper threshould and thus the temporal window was narrow and the optimal area decreased. Conclusion: Increases in volume, concentration and injection rate all resulted in improved arterial enhancement. If cost was disregarded, increasing the injection volume was the most reliable way of obtaining good quality enhancement. The optimal way of delivering a given amount of contrast medium can be calculated using a computer-based mathematical model.

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.799-807
• /
• 2010

폴리머 첨가제에 의한 항력감소 난류 채널 유동에 대한 직접수치모사를 스펙트럴 기법을 통해 수치적으로 해석하였다. 마찰속도 및 채널 높이의 절반으로 무차원화한 레이놀즈수는 395 이며, 폴리머 첨가제에 의해 발생하는 폴리머 응력은 FENE-P 모델을 통해 고려하였다. 폴리머 분자의 이완 시간 및 최대 연신 한계와 같은 FENE-P 모델 인자는 항력감소율에 큰 영향을 끼치는 것으로 나타났다. 항력감소율이 낮은 유동과 높은 유동에 대해 항력감소에 따른 난류 통계량의 변화를 조사하였다. 또한, 동일한 항력감소율을 갖는 유동에 대해, 서로 다른 FENE-P 모델 인자가 난류 통계량의 변화에 미치는 영향도 조사하였다. 최종적으로, Li 등(2006) 이 제시한 유변학 인자들과 항력감소율과의 상관관계식을 본 수치해석 결과를 통해 확인하였다.

• 생태와환경
• /
• 제37권4호통권109호
• /
• pp.411-422
• /
• 2004

횡성호에서는 수중폭기 기간에도 수온약층이 형성되었으며, 수중폭기로 인한 영향이 크지 않은 것으로 판단된다. 모든 정점의 표충(0-5m)평균 탁도는 0.1-8.5NTU로 우기 이후에 중층 및 심층에서 높았다. 투명도는 0.9-3.5m의 범위로 댐 하류(St. 1)정점에서 크게 나타났으며, 상류로 갈수록 낮았다. 용존산소는 2000년 7월과 8월에 전 지점의 0m에서 $8.4-14.1\;mgO_2\;{\cdot}\;L^{-1}$로 높았으나 심층에서는 고갈 상태를 보였다. 또한 2001년 7월과 9월에도 정점 1의 심층에서 $1\;mgO_2\;{\cdot}\;L^{-1}$ 내외로 매우 낮았다. 전 정점의 표층 (0-5 m)평균 총인 농도는 5-46 mgP ${\cdot}$ $m^{-3}$로 초봄의 turnover 직후 및 우기이후에 높았으며 용존 무기인 농도는 0.2-13.2 mgP ${\cdot}$ $m^{-3}$로 2001년 9월을 제외하고는 대부분10mgp ${\cdot}$ $m^3$이하 이였다. 횡성호의 연간 인부하량은 약 4.45ton 정도로 유역내에서 발생되는 총인 발생량 71.34ton중 약 6.2%만이 호수내로 유입되는 것으로 나타났다. 수면적당 인부하량은0.77 gp ${\cdot}\;m^2\;{\cdot}\;yr^{-1}$으로 횡성호의 환경용량이라 할 수 있는 과잉임계부하량 0.72 gp ${\cdot}\;m^2\;.\;yr^{-1}$을 0.05 gP ${\cdot}\;m^2\;.\;yr^{-1}$ 초과한 수준이다. 전 정점 표층 (0-5 m)평균 총질소 농도는 0.83-3.55 mgN ${\cdot}\;L^{-1}$로 우기 이후에 중충 이하 지역에서 높았다. 질산성 질소는 전 정점의 표층(0-5m)평균이 0.09-3.33 mgN ${\cdot}\;L^{-1}$로 2001년 6월에 가장 낮았다. 암모니아성 질소는 전 정점의 표층(0-5m)평균이 0.04-0.23 mgN ${\cdot}\;L^{-1}$이였다. 전 정점 표층 (0-5 m)평균 규소농도는 0.5-9.6 mgSi ${\cdot}\;L^{-1}$로 봄철에 낮았으며, 우기이후에 다시 증가하였다. 평균 TSI는 2000년과 2001년에 각각 59와 57이었다. 전 정점 표층 (0-5 m)평균 엽록소 a농도는 0.3-32.4 mg ${\cdot}\;m^{-3}$로 여름철에 높은 경향을 보였으며, 정점별로는 상류지역에서 높았다. 식물플랑크톤은 2000년 7월에 녹조류인 Scenedesmus sp.가 10,480 cells ${\cdot}\;mL^{-1}$,8월과 9월에는 남조류인 Microcystis sp.가 각각 3,492와 296 cells ${\cdot}\;mL^{-1}$로 우점하였다. 10월에는 녹조류인 Coelastrum microporum이 133 cells ${\cdot}\;mL^{-1}$, 11월에는 규조류인 Asterionella formosa가 2,654 cells ${\cdot}\;mL^{-1}$, 12월에는 규조류인 .Aulacoseira granulata가 29 cells ${\cdot}\;mL^{-1}$우점종이였다. 특히 2000년 여름철에 우점종이였던 남조류가 2001년에는 출현하지 않았으며 종 다양성 (diversity)지수는 2000년 7월에 2.22로 가장 높았으며, 생물량도 조사기간중 36,640 cells ${\cdot}\;mL^{-1}$로 가장 많았다.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.186-196
• /
• 2020

Pillared clays with Zr and Fe/Cu/Zr polycations have been prepared from natural clays found in large deposits of Kazakhstan and assessed as catalysts for the catalytic wet peroxide oxidation (CWPO), using 4-nitrophenol (4-NP) as model compound. The performance of the catalysts was followed by measuring the concentration of 4-NP, H₂O₂ and the total organic carbon (TOC), considering C_4-NP = 5 g L^-1, $C_{H_2O_2}$ = 17.8 g L^-1, C_cat = 2.5 g L^-1, initial pH = 3.0 and T = 50℃. At those selected conditions, the pillared clays showed higher activity than natural clays in the CWPO of 4-NP. The conversion of the model pollutant was complete when Fe/Cu/Zr-PILCs were used, with the TOC removal reaching 78.4% after 24 h with the best Fe/Cu/Zr-PILC. The H₂O₂, 4-NP and TOC time-evolution was well described by a kinetic model based on TOC lumps in three blocks, considering the initial TOC (corresponding to 4-NP), the production of oxidizable intermediates and the formation of refractory products.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2358-2366
• /
• 2013

Iron oxide (ferrihydrite, hematite, and magnetite) coated silica gels were prepared using a low-cost, easily-scalable and straightforward method as the adsorbent material for arsenic removal application. Adsorption of the anionic form of arsenic oxyacids, arsenite ($AsO^{2-}$) and arsenate ($AsO{_4}^{3-}$), onto hematite coated silica gel was fitted against non-linear 3-parameter-model Sips isotherm and 2-parameter-model Langmuir and Freundlich isotherm. Adsorption kinetics of arsenic could be well described by pseudo-second-order kinetic model and value of adsorption energy derived from non-linear Dubinin-Radushkevich isotherm suggests chemical adsorption. Although arsenic adsorption process was not affected by the presence of sulfate, chloride, and nitrate anions, as expected, bicarbonate and silicate gave moderate negative effects while the presence of phosphate anions significantly inhibited adsorption process of both arsenite and arsenate. When the actual efficiency to remove arsenic was tested against 1 L of artificial arsenic-contaminated groundwater (0.6 mg/L) in the presence competing anions, the reasonable amount (20 g) of hematite coated silica gel could reduce arsenic concentration to below the WHO permissible safety limit of drinking water of $10{\mu}g/L$ without adjusting pH and temperature, which would be highly advantageous for practical field application.

• Environmental Engineering Research
• /
• 제15권2호
• /
• pp.63-70
• /
• 2010

In this study, the response surface method and experimental design were applied as an alternative to conventional methods for the optimization of coagulation tests. A central composite design, with 4 axial points, 4 factorial points and 5 replicates at the center point were used to build a model for predicting and optimizing the coagulation process. Mathematical model equations were derived by computer simulation programming with a least squares method using the Minitab 15 software. In these equations, the removal efficiencies of turbidity and total organic carbon (TOC) were expressed as second-order functions of two factors, such as alum dose and coagulation pH. Statistical checks (ANOVA table, $R^2$ and $R^2_{adj}$ value, model lack of fit test, and p value) indicated that the model was adequate for representing the experimental data. The p values showed that the quadratic effects of alum dose and coagulation pH were highly significant. In other words, these two factors had an important impact on the turbidity and TOC of treated water. To gain a better understanding of the two variables for optimal coagulation performance, the model was presented as both 3-D response surface and 2-D contour graphs. As a compromise for the simultaneously removal of maximum amounts of 92.5% turbidity and 39.5% TOC, the optimum conditions were found with 44 mg/L alum at pH 7.6. The predicted response from the model showed close agreement with the experimental data ($R^2$ values of 90.63% and 91.43% for turbidity removal and TOC removal, respectively), which demonstrates the effectiveness of this approach in achieving good predictions, while minimizing the number of experiments required.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권2호
• /
• pp.73-80
• /
• 2014

상기도 내의 약물 전달을 알아보기 위하여 구강 호흡 시 공기유동에 대한 수치해석을 수행하였다. 상기도는 구강과 후두, 기관과 기관지로 구성되어 있다. 정밀 촬영한 CT 데이터로부터 의료영상 소프트웨어(Mimics)를 이용한 구분(segmentation)과 세심한 표면처리를 통하여 해부학적으로 정확한 모델을 만들 수 있었다. 이 3차원 컴퓨터 모델을 이용하여, 구강에서 기관지의 2번째 분지까지 이르는 유로의 수치 모델을 제작하였다. 수치해석은 상용 소프트웨어인 ANSYS/Fluent를 이용하여 계산하였다. 본 연구에 사용된 모델은 노즐이 부착되지 않은 상태에서 초당 250 mL를 흡입하는 정상 구강호흡 모델과 입구에 각각 20 mL/s, 40 mL/s, 60 mL/s의 유량을 갖는 노즐을 장착한 모델을 사용하였다. 전산 유동가시화 결과로부터, 노즐의 유량을 증가시킬수록 선회류의 발생 정도가 증가하여 구강 내 약물의 잔류 량은 증가하지만, 기관/기관지에 약물 도표는 균일하게 나타났다.

• Carbon letters
• /
• 제8권3호
• /
• pp.199-206
• /
• 2007

The activated carbon produced from rubber wood sawdust by chemical activation using phosphoric acid have been utilized as an adsorbent for the removal of Cu(II) from aqueous solution in the concentration range 5-40 mg/l. Adsorption experiments were carried out in a batch process and various experimental parameters such as effect of contact time, initial copper ion concentration, carbon dosage, and pH on percentage removal have been studied. Adsorption results obtained for activated carbon from rubber wood sawdust were compared with the results of commercial activated carbon (CAC). The adsorption on activated carbon samples increased with contact time and attained maximum value at 3 h for CAC and 4 h for PAC. The adsorption results show that the copper uptake increased with increasing pH, the optimum efficiency being attained at pH 6. The precipitation of copper hydroxide occurred when pH of the adsorbate solution was greater than 6. The equilibrium data were fitted using Langmuir and Freundlich adsorption isotherm equation. The kinetics of sorption of the copper ion has been analyzed by two kinetic models, namely, the pseudo first order and pseudo second order kinetic model. The adsorption constants and rate constants for the models have been determined. The process follows pseudo second order kinetics and the results indicated that the Langmuir model gave a better fit to the experimental data than the Freundlich model. It was concluded that activated carbon produced using phosphoric acid has higher adsorption capacity when compared to CAC.

• 대한환경공학회지
• /
• 제36권8호
• /
• pp.554-560
• /
• 2014

해양오염퇴적물 정화를 위한 몬모릴로나이트의 피복소재 적용성 평가를 위하여 $PO{_4}{^{3-}}$ 흡착특성을 알아보고자 동적흡착, 평형흡착, pH, 흡착제 주입량, 이온경쟁, 타 흡착제 복합사용 그리고 해수에서의 흡착특성을 살펴보았다. 동적흡착실험 결과 50 mg/L의 농도에서는 1시간대에 흡착평형을 나타내었고, 300 mg/L의 농도에서는 3시간대 흡착평형을 나타내었다. Freundlich 모델과 Langmuir 모델을 적용한 결과 다층흡착을 가정한 Freundlich 모델이 $PO{_4}{^{3-}}$의 평형 흡착에 더 잘 부합하였고, $PO{_4}{^{3-}}$의 흡착은 pH가 낮을 때 높은 흡착경향을 나타내었다. 이는 높은 pH에서는 OH-가 경쟁관계를 형성함으로 판단된다. 이온 경쟁관계 실험 결과 질산, 황산, 중탄산 모두 몬모릴로나이트의 $PO{_4}{^{3-}}$ 흡착에 영향이 미비한 것으로 나타났다. 몬모릴로나이트는 적니와 제강슬래그를 혼합하여 사용하는 것보다 단일 사용하였을 때 $PO{_4}{^{3-}}$ 제거에 더 효과적이었다. 해수에서의 $PO{_4}{^{3-}}$ 흡착특성을 살펴본 결과 담수에서의 흡착량 보다 높은 결과를 나타내었고 이는 해수 내 존재하는 칼슘이온 등의 결과로 판단된다. $PO{_4}{^{3-}}$ 용출 수조실험결과 몬모릴로나이트 피복 수조는 실험 14일까지 $PO{_4}{^{3-}}$이 측정되지 않았다. 몬모릴로나이트는 수용액중 $PO{_4}{^{3-}}$ 흡착 제거에 효과적인 피복소재로 판단된다.