• Journal of Korean Society of Rural Planning
• /
• v.9 no.1 s.18
• /
• pp.77-83
• /
• 2003

This study was carried out to provide the basic information for the water quality management of the Sumjin River Basin. The Chooryeongchon stream watershed was selected and the parameters representing water quality were investigated from May 1999 to September 2002, periodically. Yearly mean runoff ratio to the rainfall amount of the watershed was analysed as $26.6{\sim}58.8%$. Temporal variation of water quality constituents such as water temperature, pH, EC, total nitrogen, total phosphorus were analysed. The result showed that pH ranged $5.7{\sim}7.7$, EC $54{\sim}167\;{\mu}S/cm$, COD $0.8{\sim}18.1\;mg/L$, respectively. Total-N and total-P concentration ranged from 0.89 to 5.19 mg/L and from 0.0004 to 0.030 mg/L, respectively. The relationships between runoff and mass load were derived and showed high linear relationships.

• Journal of Korean Society of Rural Planning
• /
• v.8 no.1 s.15
• /
• pp.77-84
• /
• 2002

This study intends to classify and analyze the problem of rural villages on the basis of existing ecological and cultural resources. Based on the results of this study, rural villages in Korea can be divided into 4 types - (1) the village abundant in both ecological and cultural resources, (2) the village abundant in only ecological resources, (3) the village abundant in only cultural resources and (4) the village insufficient in two resources. And further, this study found that most ecological resources in rural villages are deteriorated or deteriorating. Even worse, the cultural resources are diminished or diminishing. It is suggested that the ecological and cultural resources need to be taken into account in the process of rural village planning.

• Journal of Welding and Joining
• /
• v.15 no.6
• /
• pp.66-77
• /
• 1997

In the present work, Taguchi method for electron beam welding(EBW) process in AISI 4130 steel plate has been adopted for investigating the contribution of effect of welding variables. $A L_8(2^7)$ orthogonal array is adopted to obtain the effect of adjustment parameters. The adjustment parameters consist of accelerating voltage, beam current, travel speed and focus currrent. And the quality features selected for the EBW process are bead width of weldment, reinforcement, penetration depth, undercut and area of weld metal. Variance analysis is performed in order to check the effect of adjustment parameters on EBW. The mechanical properties of electron beam welded joints for each heat treatment conditions are investigated in comparison with those of base metal, especially from the view point of tensile and impact properties.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.77-79
• /
• 1997

An induction watthour meter was designed for use on circuits in which the voltage and current are essentially sinusoidal. As the application of switching devices has been increased, the waveforms of voltage and current have involved the harmonics. Therefore, power energy involving voltage and current with the harmonics is supplied to the system and the registration error of watthour meter is existed. In this paper, we experimented on the error of watthour mesurement under the sinusoidal and nonsinusoidal input source.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.74-77
• /
• 2001

The saturated winding inductances of a transformer are determined using the instantaneous magnetic saturation curve. The instantaneous curve is obtained from no load saturation curve in rms form by a direct piecewise linearized approach, then it is represented by a four-term ploynominal approximation. The saturated differential, effective and apparent winding inductances are computed from this curve, and these inductances are compared with the measured magnetizing inductance. The results show that the relation of $L_d<L_e<L_a$ exists and the computed apparent inductance is more close to the measured inductance.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.77-79
• /
• 1995

This paper investigates the force on a rectangular AC supercoducting coil moving above and parallel to a conducting plate of finite thickness. Expressions are developed for the levitation and drag forces on the coil a a function of speed and frequency. The levitation force are generated at all speed including stand still in a AC supercoducting coil. The levitation and drag forces on a rectangular AC supercoducting coil are compared with those on a rectangular DC supercoducting coil moving above and parallel to a conducting plate.

• Natural Product Sciences
• /
• v.27 no.2
• /
• pp.68-77
• /
• 2021

Silymarin is a standardized extract obtained from the seeds and fruits of Silybum marianum L., or commonly called milk thistle, a member of Carduus marianum family that contains mix of flavonolignans. Some epidemiological and preclinical studies revealed that S. marianum L. has been used for herbal remedies for centuries for its pharmacological activity. In this review, pharmacological studies in vitro and in vivo of silymarin are discussed thoroughly stressing on antioxidant, antimicrobial, antiviral, and anti-carcinogenic aspects of silymarin. In addition, the protective influences of silymarin on some organs such as heart, liver, bone, and neuron tissue are reviewed as well. This review would be useful for further study regarding the potential of natural plant, notably silymarin, and its therapeutic potential in the prevention and treatment of diseases.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.399-399
• /
• 2015

밭에서의 비점오염은 경사에 따른 토양유실과 높은 비료 시용량으로 부하가 상대적으로 높아 이에 대한 관리의 필요성이 증대되고 있다. 따라서 본 연구에서는 4개의 강우 사상에 대하여 경사지 밭에서 유출되는 오염물질의 농도와 특성을 파악하여 밭에서의 비점오염 관리의 기초 자료로 제공하고자 한다. 본 연구의 조사 지구는 충청북도 청주시 상당구 미원면 옥화리에 위치한 경사지 밭으로 면적은 0.77 ha이며, 중앙에 위치한 배수로 말단에 삼각위어를 설치하여 4개의 강우사상에 대해 모니터링을 수행하였다. 연구결과 강우사상의 강우량은 17.0~33.6 mm의 범위로 나타났으며, 평균 강우강도는 1.0~4.8 mm/h로 나타났다. 유출률은 3.1~26.8 %로 나타났는데, 선행강우가 높은 강우사상에서 가장 높은 값을 보였다. 오염물질 유량가중평균농도(Event Mean Concentration; EMC)는 TN 5.6~13.1 mg/L(평균 10.8 mg/L), $NO_3-N$ 4.1~12.9 mg/L(평균 9.3 mg/L), TP 0.46~1.34 mg/L(평균 0.8 mg/L), $PO_4-P$ 0.3~0.8 mg/L(평균 0.5 mg/L), SS 1,099~6,547 mg/L(평균 3,438 mg/L) 및 COD 27.1~38.6 mg/L(평균 33.1 mg/L)의 범위를 보였다. TN과 TP의 유량가중평균농도 평균값은 강우시 농촌유역 유출수의 유량가중평균농도인 3.1, 0.3 mg/L보다 높게 나타나 밭으로부터의 유출수가 유역 유출수의 농도를 높이는 것으로 판단된다. 또한 TN 농도는 시비의 영향을 받고, TP 농도는 강우강도와 작물 부분 토양 피복도의 영향을 받는 것으로 나타났다. SS 농도는 평균 강우강도에 비례하는 것으로 나타났다. 강우에 따른 오염물질 농도변화를 보면 TN의 농도는 강우 초기에 높게 나타났으며, 유량이 증가함에 따라 감소하고, 유량이 감소하면서 다시 증가하는 경향을 보였다. TP, SS 및 COD의 농도는 유량이 증가함에 따라 증가하고, 유량이 감소하면서 다시 감소하는 경향을 보였다. 또한, SS의 경우 최대농도가 첨두유량 앞에서 나타나는 초기 세척현상(First flush)을 보였다. 향후 보다 많은 강우사상을 대상으로 밭 유출수의 농도 및 오염부하에 대한 추가적인 모니터링을 통해 오염물질의 유출특성을 파악해야 할 것으로 판단된다.

• The Korean Journal of Ecology
• /
• v.18 no.3
• /
• pp.419-427
• /
• 1995

This study was carried out to investigate the concentrations of Cu, Pb, Zn and in seawater, sediments and Mytilus edulis at Masan Bay, Onsan Bay, Daesan industrial complex and unpolluted area for the degree of contamination on the coast of Korea. The concentrations of dissolved Cu, Pb, Zn and Cd in seawater the ranges of 0.29~0.79 ${\mu}g/l$, 0.03~0.08 ${\mu}g/l$, 0.19~2.01 ${\mu}g/l$ and 0.01~0.05 ${\mu}g/l$, respectively. The concentrations of Pb(p<0.001) and Zn(p<0.01) showed the significant differences between the contaminated and unpolluted area. There were the ranges of 13~55 ${\mu}g/l$, 26~101 ${\mu}g/l$, 51~263 ${\mu}g/l$ and 0.8~2.2 ${\mu}g/l$ in the concentration of Cu, Pb, Zn and contaminated and unpolluted area. The concentration of Cu, Pb, Zn and Cd in the Mytilus edulis showed the ranges of 0.69~2.77 ${\mu}g/l$, 0.29~1.50 ${\mu}g/l$, 13.57~52.90 ${\mu}g/l$ and 0.09~0.85 ${\mu}g/l$ respectively. These concentrations of four trace metal in Mytilus edulis were not significantly different with sites. Trace metal contents of Mytilus edulis in the contaminated site were similar to those in the unpolluted area. This is thought that metal concentration in coastal seawater were not relatively serious.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.4
• /
• pp.14-19
• /
• 2020

Here we present the comparative experimental study of the stability of the superconducting state in 4 mm YBCO tapes with copper lamination against local heat disturbances at 77 K. The samples are either directly cooled by immersing a bare YBCO tape into a liquid nitrogen pool or operate in nearly-adiabatic conditions when the tape is covered by a 0.6 mm layer of Kapton insulation. Main quench characteristics, i.e. minimum quench energies (MQEs) and normal zone propagation (NZP) velocities for both samples are measured and compared. Minimum NZP currents are determined by a low ohmic resistor technique eligible for obtaining V - I curves with a negative differential resistance. The region of transport currents satisfying the stationary stability criterion is found for the different cooling conditions. Finally, we use the critical temperature margin as a universal scaling parameter to compare the MQEs obtained in this work for YBCO tapes at 77 K with those taken from literature for low-temperature superconductors in vacuum at 4.2 K, as well as for MgB2 wires cooled with a cryocooler down to 20 K.