• Korean journal of food and cookery science
• /
• v.24 no.2
• /
• pp.266-271
• /
• 2008

In this study, Jeolpyon(imprinted with flow patterns) was prepared with different amount of added Astragalus membranaceu extracts(0%, 3%, 6%, 9% and l2%)and then the quality and sensory characteristic effects were examined. All togather the chemical composition of the samples was as follows: $53.l2{\pm}0.04%$ of moisture, $l4.43{\pm}0.05$ crude protein, $7.6l{\pm}0.11%$ crude fat, and $21.35{\pm}0.09%$ crude ash. Hardness and cohesiveness significantly increased(p <0.001), and springiness, chewiness and adhesiveness decreased, with increasing amounts of Astragalus membranaceus extract. In the chromaticity analysis, the L-value(brightness)significantly decreased with increasing Astragalus membranaceus extract content, and the b-value(yellowness) increased in direct proportion to the extract content. Finally, in the sensory evaluation, the Jeolpyon containing 9.0% extract received the highest overall preference scores.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.124-130
• /
• 2007

Least squares ($l^2$ norm) solutions of seismic inversion tend to be very sensitive to data points with large errors. The $l^1$ norm minimization gives more robust solutions, but usually with higher computational cost. Iteratively reweighted least squares (IRLS) method gives efficient approximate solutions of these $l^1$ norm problems. I propose an efficient implementation of the IRLS method for a hybrid $l^1/l^2$ minimization problem that behaves as $l^2$ norm fit for small residual and $l^1$ norm fit for large residuals. The proposed algorithm shows more robust characteristics to the decision of the threshold value than the l1 norm IRLS inversion does with respect to the threshold value to avoid singularity.

• The Korean Journal of Health Service Management
• /
• v.3 no.2
• /
• pp.87-94
• /
• 2009

The purpose of this study is to evaluate the relationship between osteoporotic postmenopausal women and its bone mineral density value by using the single energy quantitative CT. 1. Decreasing BMD with age is evident. There is a significant low BMD value in the osteoporotic women compared with the healthy subgroup. 2. BMD decrease from T12 to L4, except in healthy premenopausal women. 3. Relationship of spinal BMD expressed as average BMD of T12 through L4 Show strong correlation with mean BMD in all vertebral levels. 4. There are significantly different BMD value from T12 through L4 in subgroup 1, 2, 3 but there is no statistically significant difference between subgroup 2 and 3. Conclusion, There is a significant decreasing BMD with age but it is difficult to differentiate postmenopausal relatively healthy women from osteoporotic women by BMD.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.26-33
• /
• 1996

The berberine from Amur cork tree is natural yellow dye and can be extracted more easily by water. The berberine is basic dye and was extracted at 90-95$^{\circ}C$. We have obtained the following results; 1. K/S value in the abstract of dye was increased by time-elapsing, but the reasonable time was between 90-120min. 2. The reasonable weight of Amur cork tree in the abstract of dye was between 10-20 g/L. 3. We obtained various colors in case of using mordants. ―In case of 10g/L and 20g/l, the reasonable value of mordant was 5-10%(owf). and in case of using tannic acid and $FeSO_{4}$ we could obtain high K/S value. 4. &{\lambda}_{max}& of UV spectra was shown 420nm. 5. Genarally fastness of drycleaning indicated more than grade 4. but it of perspiration was more stable in acid than alkali.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.347-352
• /
• 2005

This paper presents an evaluation model for the performance of Value Engineering Study (VES) for construction projects. The proposed model consists of 6 PEGs and 32 PEIs. The expertise of the proposed model was collected from VE experts in Taiwan using two-phase questionnaire survey. One real-life VES of construction projects was used to demonstrate how the proposed model works. The proposed model not only can be used by project owners to appraise the performance of VES team but also be used by the VES teams to conduct self-diagnosis, improvement, and motivation for achieving better performance. Additionally, the proposed model is capable of: (1) clarifying the defects of VES and avoiding committing same mistakes, (2) assisting inexperience team members to implement VES and catch the critical issues of a VES.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.239-243
• /
• 1985

The growth characteristics of Candida sp. JY-5 were examined on ethanol, acetic acid, or acetaldehyde as sole source of carbon by batch culture. The specific growth rates ($\mu$) of this strain on an ethanol during tile exponential period were changed depending upon the initial concentrations at above 0.5 g/l, but not in the proportion. The highest $\mu$ value was 0.291 hr$^{-1}$ and the maximum growth yield was 61.2％ at the concentration of 10 g/l. The $\mu$ values on an acetic acid substrate were constant regardless of the initial concentrations presenting 0.106 hr$^{-1}$ in the highest value. The maximum growth yield was shown as 46.8％ at the initial concentration of 10 g/l. The $\mu$ value on an acetaldehyde during the exponential period was 0.063 hr$^{-1}$ and the maximum growth yield was 44.9％ at the initial acetaldehyde concentration of 0.2 g/l.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.383-391
• /
• 2014

This study was conducted to ascertain the antioxidant properties of Hamcho (Salicornia herbacea L.) and as well as manufacture pettitoes using Hamcho as a natural antioxidant material for diverse applications. The DPPH radical scavenging activities of 25, 50, 100 mg/mL in methanol extracts from Salicornia herbacea L. increased significantly (p<0.05) to 12.8%, 21.6% and 39.1%, respectively. The total phenolic content was $38.58{\pm}4.25{\mu}M$ as tannic acid equivalent for 100 mg/mL of methanol extracts from Hamcho. FRAP value was $448.58{\pm}14.01{\mu}M$ as ascorbic acid equivalent in reducing power. To apply Hamcho to food as a natural antioxidant, pettitoes were prepared with added Hamcho. To manufacture pettitoes added with Hamcho, general quality characteristics of pettitoes added with 0%, 2%, 4% and 6% based on 100 g of pettitoes were determined. In conclusion, mineral components increased according to the added amount of Salicornia herbacea L. Crude protein showed the highest value with 2% added Hamcho. Overall, the addition of Hamcho led to hardening of the meat texture. As a result of measuring color in terms of brightness, redness, and yellowness with chromaticity, the L value (brightness) increased with added amount of Hamcho. There was no significant difference in redness or yellowness. As a result of the sensory evaluation of pettitoes according to addition of Hamcho, the group with 4% added Hamcho showed enhanced overall preference with improved flavor, taste and textural properties.

• Advances in environmental research
• /
• v.5 no.3
• /
• pp.189-200
• /
• 2016

This study aimed at advanced oxidation of hetero tri-functional reactive dye Acid orange 7 using photo-Fenton conditions in a lab-scale experiment. Decolourisation of Acid Orange 7 dye by Fenton's process was dependent on concentration of Hydrogen peroxide, Ferrous sulphate, pH, and contact time. A $2^3$ factorial design was used to evaluate the effects of these key factors: pH, Fe(II), and $H_2O_2$ concentration, for a dye concentration of 50 mg/L with COD of 340 mg/L at pH 3.0. The response function was removal of colour under optimised conditions; pH 3.0, [Fe(II)] 40.83 mg/L, [$H_2O_2$] 4.97 mmol/L; 13.6 min. of treatment resulting in 100% colour removal. The final COD of treated wastewater was nil suggesting that AOP is a potentially useful process of color removal and dye degradation/mineralisation of effluent having AO7. Minimum contact time for complete decolourisation was at 5 mmol/l $H_2O_2$ concentration. Increase in $FeSO_4$ (mg/l) concentration resulted in decrease of time for complete decolourisation. Box-Behnken Design was used to optimize the process variables. Maximum and minimum levels of pH (3-5), $H_2O_2$ (4-6 mmol/l), $FeSO_4$ (30-46 mg/l) and contact time (5-15 minutes) were used. The statistical analysis revealed a value of 0.88 for coefficient of regression ($R^2$) indicating a good fit of model. Calculated F-value was found higher than the tabulated value confirming to significance of the model. Based on student's t-test, Ferrous sulphate, pH, and contact time have a positive effect on the percent decolourisation of Acid Orange 7.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.163-170
• /
• 1992

Color of kimchi juice was measured instrumentally to evaluate the quality of Korean cabbage kimchi during fermentation at 4$^{\circ}C$ and 16$^{\circ}C$ . These results were compared with those of chemical analyses of kimchi juice and sensory evaluation for kimchi. Chemiral analyses and sensory evaluation showed that the kimchi has reached pH 4.3, the pH value under an optimum ripening period, after 3-days fermentation at 16$^{\circ}C$ with almost the highest contents of vitamin C and carotenoids as well as desirable sour taste and texture. At 4$^{\circ}C$ the kimchi was unripened after 6-days fermentation. At 16$^{\circ}C$, $L^{*}$ value of kimchi juice did not show any significant change during fermentation periods. However, $a^{*}$ value increased until day 4$^{\circ}C$ and thereafter decreased sharply. $b^{*}$ value increased until day 3 and then showed no change. High correlations were seen between volume of kimchi juice, pH, total acidity and $L^{*}$or $b^{*}$ value, and between carotenoid content and $a^{*}$ value, respectively. It was desirable to use color $a^{*}$ or $b^{*}$ value of kimchi juice to evaluate the quality of kimchi. The kimchi was under an over-ripening period when $a^{*}$ value was equal to or lower than the initial value, or when $b^{*}$ value was almost constant. Predicting an optimum ripening period was possible by using a proportional value of $a^{*/}$ $b^{*}$ , i.e., unripening period, 1 $\geq$ and near 1 ; optimum ripening period, near 0.8 ; over-ripening period, < 0.8.eriod, < 0.8.d, < 0.8.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.95-102
• /
• 2009

The aim of this study was to evaluate the influence of light energy on the tooth whitening effect of bleaching agent in vitro..Extracted human mandibular molars were sectioned to 2 fragments(mesial. distal) and lingual portions of crown were used in this study. All specimens were stained using a red wine for 24 hours and immersed in artificial saliva. Specimens divided into four groups, group 1 and 2 light-activated by LumaCool (LED, LumaLite, Inc., Spring Valley, USA), group 3 and 4 light-activated by FlipoWhite2 (Plasma acr lamp, Lokki. Australia). Group 1 and 3 bleached with Luma White (LumaLite, Inc., Spring Valley, USA), group 2 and 4 bleached with Polaoffice(SDI, Victoria, Australia). Bleaching treatment performed during 10 minutes every 24 hours and repeated 6 times. During bleaching treatment, distal fragments was light-activated (L) but mesial fragments was not(NL). Shade assessment employed before and after bleaching treatment using spectrophotometer. The results of the change in shade was compared and analysed between NL and L by using paired-sample T test with 95 % level of confidence. There were no significant differences between NL and L with a few exceptions. In group 2, $a^*$ value more change in L, in group 3, $b^*$ value more change in L, in group 4, $a^*$ value less change in L. After bleaching, $L^*$ value and ${\Delta}E$ increased in all groups and the value of $a^*$ and $b^*$ decreased in all groups. Within the limitation of this test conditions, the results of this study indicate that the light energy has no obvious improving impact on the tooth whitening effect of a bleaching agent.