• 한국식품과학회지
• /
• 제30권1호
• /
• pp.168-174
• /
• 1998

이 연구는 발효유 제조시 사용되는 Lactobacillus acidophilus NCFM이 생산하는 lactic acid의 생성변이를 조사하므로써 발효유 제조시 D(-)-lactic acid의 함량을 최소화하고 보존 중의 D(-)-lactic acid의 함량도 최소화하므로써 보다 인체에 유익한 발효유의 제조를 위한 기초적인 정보를 제공하기 위하여 실시되었으며, 그 결과는 다음과 같다. 발효온도는 $37^{\circ}C$에서 산생성이 가장 우수하였으며, D(-)-lactic acid의 비율도 가장 낮았다. 보존온도에 따른 변이에서는 저온에서 후산생성도 적었으며, D(-)-lactic acid의 비율도 가장 낮았다. 또한 처리에 따른 산생성에서는 호기상태에서 산생성이 가장 우수하였으며, D(-)-lactic acid의 함량이 가장 낮았다.

• 환경위생공학
• /
• 제13권2호
• /
• pp.95-105
• /
• 1998

This research was investigated which denitrification of wastewater containing nitrate, using upflow anaerobic sludge blanket process. The upflow anaerobic sludge blanket process is also used for both artifical and industrial wastewater. Main ingredients investigated in the artifical and industrial wastewater experiment were the determination of optimum organism/nitrate ratios, nitrate removal efficiency by various hydrogen donor addition and characteristics of granular sludge and gas production in case of various hydrogen donor addition. From the experimental results the following conclusions were made: In case of adding methanol, ethanol and sodium acetate as hydrogen donor granular sludge was formed 50 days after seeding. Average diameter of granular sludge was 4.0 mm and settling velocity was 37 cm/min. Production rate of gas 3.3 L/d in case of adding methanol as hydrogen donor in wastewater containing 150mg/L nitrate. However adding ethanol and sodium acetate as hydrogen donor, gas production rate were 2.2-2.7L/d respectively. In case of adding methanol as hydrogen donor treatability of artifical wastewater contained 150mg/L as nitrate was about 93%. But in addition of sodium acetate in wastewater contained 40mg.L as nitrate, nitrate removal efficiency was 80%.

• Journal of Microbiology and Biotechnology
• /
• 제4권1호
• /
• pp.56-62
• /
• 1994

A yeast strain, BT001, which can directly ferment D-xylose to ethanol was isolated from forest soils, and then identified as Candida sp. Cultural conditions for the optimum ethanol production, along with the effects of aeration on cell growth and ethanol production were investigated. Aeration stimulated the cell growth and the volumetric rate of ethanol production, but decreased the ethanol yield. Optimum temperature and initial pH for the ethanol production were $33{\circ}^C$ and 6.0, respectively. In a shake flask culture, this strain produced 52.3 g ethanol per liter from 12%(w/v) D-xylose after incubation for 96 hours. Ethanol yield was 0.436 g per g D-xylose consumed. This corresponds to 85.8% of theoretical yield. Also, this yeast strain produced ethanol from D-galactose, D-glucose and D-mannose, but not from L-arabinose and L-rhamnose. Among these sugars, D-glucose was the fastest in being converted to ethanol sugars.

• 유기물자원화
• /
• 제27권4호
• /
• pp.25-33
• /
• 2019

하수슬러지로부터 바이오가스를 생산하기 위한 30 L 규모의 미생물전기분해전지 시스템의 초기 운전특성에 관한 연구를 수행하였다. 32일간의 식종기간동안, 운전시간이 경과함에 따라 이산화탄소 농도는 감소하고 메탄농도가 증가하였으며, 69.1%의 농도를 가진 메탄가스가 171.6 mL CH₄/L·d의 속도로 얻어졌다. 식종이 끝난 후에 6회의 운전 사이클동안 이루어진 회분식 실험에서, 66.5~77.2%의 농도를 가진 메탄을 184.9~372.9 mL CH₄/L·d의 생산속도로 얻어졌다. COD의 제거효율은 28.2~42.1%의 범위를 가지며, TS와 VS의 제거효율은 각각 20.7~37.5%와 18.5~36.9%의 범위를 가지는 것으로 나타났다. 식종 후 운전 사이클이 반복됨에 따라 시스템의 안정화가 이루어지는 것이 관찰되었다. 마지막 운전 사이클에서 메탄의 발생량과 수율은 각각 5221 mL/L와 316.7 L CH₄/kg COD_rem이었으며 에너지회수율은 73%이었다.

• Journal of Pharmaceutical Investigation
• /
• 제20권1호
• /
• pp.13-18
• /
• 1990

Hydrocortisone (HC) sustained-release suppositories were prepared by using a solid matrix of methacrylic acid-methacrylic acid methyl ester copolymer $(Eudragit\;L_{100}^{R}:\;EL)$ as a poorly water soluble carrier and polyethylene glycole 1540 (PEG) as an water soluble carrier. HC release rate was controlled by complexation with ${\beta}-cyclodextrin$ $({\beta}-CyD)$ which was confirmed by X-ray diffractometry, IR-spectroscopy and differential scanning calorimetry. Release rate of HC from the EL-PEG matrix suppositories decreased with increase of EL contents. The release rale from $HC-{\beta}-CyD$ complex decreased in the following order: $HC-{\beta}-CyD/PEG$ > HC/PEG > $HC-{\beta}-CyD/EL_{10%}-PEG$ > $HC/EL_{10%}-PEG$ > $HC-{\beta}-CyD/EL_{15%}-PEG$ > $HC/EL_{15%}-PEG$ > $HC-{\beta}-CyD/EL_{20%}-PEG$ > $HC/EL_{20%}-PEG$. The crystallinity of HC in polymer matrix was identified using X-ray diffractometer and the surface of matrix suppositories after release test was examined by scanning electron microscopy. The sustained release of HC from these matrix suppositories was attributed to the network structure of EL.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.91-100
• /
• 2000

An operating principle of PID module was implemented using the load, where the integer in a PID measuring derivate equation were valid in the ranges of 500-9000, 60-1000, and 000-9000, for P, I and D, respectively. A load operation program was designed to investigate the PID theory and its realization process. With it, it was examined the process that the current PV tracts the target SV, By investigating the time when the PV approaches the SV and the rate at which the EV is varied, it is revealed that 1) larger (or Smaller) Kp leads to faster (or slower) approaching of PV to SV, 2) smaller (or larger) Ti results in faster (or slower) approaching of PV to SV, 3) larger (or smaller)$T_d$ causes smaller (or Larger) rate variation in the EV. These observation were found to coincide with those of PID operating characteristics. Though this implementation, it is known for the widespread use of PID module that an improvement should be made in the error of temperature. This, meanwhile, implies that the computational time of conventional manipulation valve must be faster than 0.1 second. It is demanded that an improved PID module including the A/D and D/A module, in itself must be used in conjunction with PLC.

• 대한핵의학회지
• /
• 제38권3호
• /
• pp.259-267
• /
• 2004

목적: 전신용 PET에 대한 표준 성능 평가 방법으로 NEMA NU2-2001이 확립되어 제안되었다. 따라서 새로이 설치되는 PET 스캐너뿐 아니라 기존에 사용 중인 스캐너에 대한 성능 평가가 이 표준 방법에 따라서 새로이 이루어 져야 한다. 이 연구에서는 NEMA NU2-2001 방법을 이용하여 CTI ECAT EXACT 47 PET 스캐너의 공간해상도, 민감도, 산란분획, NECR 등을 측정하였다. 대상 및 방법: 공간해상도를 평가하기 위하여 축 방향 시야의 정 가운데와 축 방향 시야 길이의 1/4을 벗어난 횡단면에 F-10을 채운 유리관(내경 1.1 mm)을 횡단면의 중심에서 1, 10 cm 떨어진 지점에 축 방향과 평행하게 위치시킨 후 PET 영상을 얻었다. 민감도를 측정하기 위하여 폴리에틸렌 및 알루미늄 관에 F-18을 채운 후 불응시간 손실이 1%를 넘지 않는 것을 확인한 후 영상을 획득하였다. 산란분획 및 최적 영상 획득 조건을 얻기 위하여 NECR을 NEMA 산란 팬텀을 이용하여 측정하였다. 결과: FBP재구성 방법(화소 크기: $0.515{\times}0.515mm^2$)으로 영상을 재 구성했을 때 스캐너의 중심에서 1cm 벗어난 지점에서 축방향, 횡축방향 공간 분해능은 0.62, 0.66 cm (FBP, 2D와 3D), 0.67, 0.69 cm (FBP, 2D와 3D)이었고 중심에서 10 cm 벗어난 지점에서 축방향, 횡축반경방향, 횡축접선방향 공간 분해능은 0.72, 0.68 mm (FBP, 2D와 3D), 0.63, 0.66 mm (FBP, 2D와 3D), 0.72, 0.66 mm (FBP, 2D와 3D)이었다. 민감도는 스캐너의 횡축방향 708.6 (2D), 2931.3 (3D) counts/sec/MBq, 횡축방향 중심에서 10cm 벗어난 지점에서 728.7 (2D), 3398.2 (3D) counts/sec/MBq 이었다. 산란 분획은 0.19 (2D), 0.49 (3D)이었고 최고 참 계수율과 NECR은 2차원 영상 획득 모드에서 40.1 kBq/mL 일 때 64.0 kcps, 40.1 kBq/mL 일 때 49.6 kcps, 3차원 영상 획득 모드에서 4.76 kBq/mL 일 때 53.7 kcps, 4.47 kBq/mL 일 때 26.4 kcps이었다. 결론: 이 실험에서 NEMA NU2-2001로 측정한 PET스캐너의 물리적 특성은 PET스캐너에 대한 객관적 평가 및 최적화 된 영상 획득과 분석에 유용할 것이다.

• Journal of Microbiology and Biotechnology
• /
• 제2권2호
• /
• pp.98-101
• /
• 1992

Continuous production of fructo-oligosaccharides employing a packed bed reactor charged with immobilized cells of Aureobasidium pullulans was investigated. The optimum conditions for reactor operation were a feed concentration of 860 g/l; a feed rate, expressed as superficial space velocity of $0.2\;h^{-1}$, and a temperature of $50^\circ{C}$. Under these optimum conditions, the productivity of the reactor was $180\;g/l\cdot{h}$. Initial activity was maintained for more than 100 days. The reactor was successfully scaled up to a production scale of 1000l.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.65-66
• /
• 2005

Anaerobic digestion is one of the well-known methods for biological treatment handling of concentrated organic matter such as swine $wastewater.^{1)} The anaerobic digestion can reduce organic loading but also hydrolyze non-biodegradable organic $matter.^{2)}$ The feces from the scrapper-type barn are usually collected to make compost and the urine is discarded with swine-slurry wastewater by ocean-dumping or treated by biological methods. The lagoon, aerobic digestion, anaerobic digestion, SBR, $A^{2}/O$, and UCT have been applied for treating swine $wastewater.^{3)} In this study, as a result of the analysis of swine wastewater, the total and soluble chemical oxygen demand was 130g/L and 60g/L, respectively. And the volatile fatty acid as chemical oxygen demand equivalent was 45g/L, which was 75% of soluble chemical oxygen demand. Before everything else, ammonia nitrogen concentration was 6.5 g/L. From biochemical acidogenic potential test, it was concluded that the enhanced acidification process to manage swine waste should be operated in the ammonia nitrogen concentration of less than 1.2 g/L. In the result of seeding ratio experiments with artificial $wastewater^{4)}, the lag period of acidogens was taken the long time because of the inhibition by the $ammonia^{5)}$, however no difference of period by the seeding ratio was not shown. The Haldane-based biokinetics were also evaluated using a method of fourth order Runge-Kutta $approximation.^{6,7)}$ The nonlinear least squares (NLLS) method with a 95% confidence interval was also used. The ranges of maximum microbial growth rate, ${/mu_{max}}$, and half saturation coefficient, $K_{s}$, for acidogenesis of various seeding ratio with artificial wastewater were 6.1 ~ 12.6 $d^{-1}$ and 45,000 ~ 53,500 mg glucose/L, respectively. Also, the methanogenic microbial yield coefficient, Y, and microbial decay rate coefficient, $k_{d}$, and inhibition substrate concentration, $K_{si}$, for the reactors were determined to be 0.32 ~ 0.465 ${/mu}g$/mg glucose; 0.42 ~ 1.01 $d^{-1}$ and 51,500 ~ 55,600 mg glucose/L, respectively.

• 태양에너지
• /
• 제10권3호
• /
• pp.3-12
• /
• 1990

본 실험연구에서는 탱크의 직경에 대한 높이의 비(H/D)가 3이고 유입 유량이 8LPM, 유입수의 온도와 기존 저장수와의 온도차, ${\Delta}T=30^{\circ}C$일때, 운동량교환을 최소화하여 가장 좋은 성층을 얻었고 또한 실험에서 사용한 유입구(Inlet Port)의 경우 수정 Richardson수(Modified Richardson Number), Ri가 0.004(Q=10LPM, ${\Delta}T=30^{\circ}C$) 이하의 값에서는 완전 혼합(Fully Mixing)이 발생하고 H/D가 작아질수록 혼합층의 두께($H^*/H$)가 증가하여 성층 축열에는 바람직하지 못하였다. 그리고 성층은 성층을 촉진시키기 위하여 Distributor를 사용했을 때가, Distributor를 사용하지 않은 유입구(Inlet Port)의 경우 보다 잘 형성되어 저장효율이 Distributor를 사용한 경우(Q=8LPM, ${\Delta}T=30^{\circ}C$, H/D=3)에 Distributor를 사용하지 않은 유입구(Inlet Port)의 최저효율 63%(Q=12LPM, ${\Delta}T=30^{\circ}C$, H/D=3인 경우)보다는 31% 정도, 최대효율 84%(Q=8LPM, ${\Delta}T=30^{\circ}C$, H/D=3인 경우)보다는 11% 정도 높은 95%까지 저장 효율을 증가시킬 수 있었다. 더 나아가서 단면이 균일한 원형 Distributor(A=D=Constant)의 경우에, 유량이 8LPM인 경우에 관내의 압력차가 작아 부분혼합(Partial Mixing)이 감소하여 안정된 성층을 얻을 수 있었다. 그리고, Distributor의 직경을 다음식과 같이 $$\frac{D}{D_L}=(\frac{x}{L})^{1/2}(1+\frac{fL}{2D})-\frac{fx}{2D_L}$$ 길이에 대하여 변화시켜 Distributor를 제작함으로써, 보다 안정된 열성층과 높은 열저장 효율을 얻을 수 있을 것으로 예상한다.