• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.98-102
• /
• 1996

This study investigated performance of the phenol degradation and reaction characteristics according to variation of phenol volumetric loading rates and dilution rates in suspension and PACT reactors using Pseudomonas sp. B3. 1. Removal efficiencies of the PAC unit indicated about 100 % with phenol volumetric loading rates from 0.4 phenol $kg/ma^3\cdot d$ to 1.2 phenol $kg/m^3\cdot d$, however, which of the suspension reactor showed about 100% with from 0.2 phenol $kg/m^3\cdot d$ to 0.75 phenol $kg/ma^3\cdot day$. 2. The cell density slightly was decreased from 298.2 mg/l to 272 mg/l, when dilution rate for suspension was reactor increased from 0.4 to 1.41 1/d, and also the cell density suddenly was decreased to 145.5 mg/l and was washed out at the dilution rate higher than 1.60 1/d. But the cell density for the PAC unit was linearly decreased with dilution rate of from 0.8 to 3.0 1/d, and showed 220.75 mg/l at maximum dilution rate. 3. The phenol utilization rate was increased from 0.008 to 0.031 phenol g/l$\cdot$h, when dilution rate for suspension reactor was increased from 0.4 to 1.5 1/d, however, the rate for the PAC unit was linearly increased from 0.017 to 0.061 phenol g/l$\cdot$h as variation changes from 0.017 to 0.061 phenol g/l$\cdot$h dilution rate.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.511-519
• /
• 1999

The shape of orthodontic retraction spring was varied and force system of each case was obtained using numerical analysis and verified with spring tester. The factors for obtaining biomechanically efficient spring under anatomic limitation were suggested as follows. 1. M/F ratio increases and L/D rate decreases as loop height increases. 2. M/F ratio increases and L/D rate decreases as incorporating more wire above minimum bending moment area. 3. M/F ratio decreases and L/D rate decrease as incorporating more wire below minimum bending moment area. 4. M/F ratio can not be greater than spring height no matter how much wire is incorporated at the apex of the loop. 5. Additional moment is necessary to obtain enough M/F ratio for translation under anatomical limitation. 6. Additional moment should be incorporated at every pah of the spring because M/F ratio and L/D rate decreases as horizontal spring length increases. 7. Material, cross section, and shape of the spring influence L/D rate, whereas M/F ratio is influenced by the shape of the spring independent from material and cross section.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.371-377
• /
• 2014

Characteristics of holdup and flow behavior of fluidized solid particles were investigated in a liquid-solid circulating fluidized bed ($0.102m{\times}3.5m$). Effects of liquid velocity ($U_L$), particle size ($d_P$) and solid circulation rate ($G_S$) on the solid holdup, overall particle rising velocity, slip velocity between liquid and particles and hydrodynamic energy dissipation rate in the riser were examined. The particle holdup increased with increasing $d_P$ or $G_S$ but decreased with increasing $U_L$. The overall particle rising velocity increased with increasing $U_L$ or $G_S$ but decreased with increasing $d_P$. The slip velocity increased with increasing $U_L$ or $d_P$ but did not change considerably with $G_S$. The energy dissipation rate, which was found to be closely related to the contacting frequency of micro eddies, increased with increasing $d_P$, $G_S$ or $U_L$. The solid particle holdup was well correlated with operating variables such as $U_L$, $d_P$ and $G_S$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.2
• /
• pp.43-46
• /
• 1971

1. The effects of different conditions of the feedings in connection with the bottom stata on the growth rate of Penaeus orientalis have been investigated. 2. The relationships between the days (D) after hatching and the carapace lengths (L) of p. orientalis are represented by the following equations: Feeding, muddy bottom: L=0.3939D+6.8965 feeding, sandy bottom: L=0.2652D+12.2620 Nonfeeding, sandy bottom: L=0.0713D+16.0655 Nonfeeding, muddy bottom: L=0.2852D+7.8620 3. The growth rate of the carapace length of p. orientalis in the region of muddy bottom is higher than that of the carapace in the sandy bottom whether the prawns are fed or not.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.315-322
• /
• 2006

This experiment was conducted to investigate the induction rate of callus and antioxidative activity of rosemary and lavender. Callus induction rate of rosemary was 92% and 94% at 0.5mg/L and 1.0mg/L of 2,4-D in the media, respectively. The antioxidative activities of rosemary appeared differently according to the callus cultured under various concentrations of plant growth regulators. The strongest effect was observed at 0.1mg/L of 2,4-D extract, with $43{\pm}1.5{\mu}g/mL$ of an RC50 value. Callus induction rate of lavender was 98% and 99% at 1.0mg/L of 2,4-D and 1.0mg/L of NAA in the media, respectively. The regeneration rate of roots lavender was 85% at 1.0mg/L of NAA in the media. Antioxidative activities of lavender appeared diffently according to the callus cultured under plant growth regulators. The strongest effect was observed in 0.1mg/L of 2,4-D extract, with $37.6{\pm}0.9{\mu}g/mL$ of an RC50 value, which could be compared with value of leaf.

• Journal of Plant Biotechnology
• /
• v.4 no.1
• /
• pp.17-21
• /
• 2002

To establish an the mass production system of grape anthocyanin pigments through callus and cell suspension culture, the effects of various combinations of auxins and cytokinins on friable callus production were studied. for friable callus production, 2,4-D was superior to other regulators. IAA at 2 mg/L induced callus from stem and petiole while NAA resulted in rooting. Callus induction rate increased with the 2,4-D level, and stem segments were superior to leaf blade or petiole, showing nearly 100% with 1 and 2 mg/L 2,4-D from petiole and stem. Combined treatments of 2,4-D + kinetin and NAA + BA also yielded friable callus from stem segments. In treatments with 1 mg/L 2,4-D + 1 mg/L kinetin and 1 mg/L NAA + 1 mg/L BA, callus induction rate was nearly 100%. The combination effect of 2,4-D and BA on anthocyanin production was not significant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.83-87
• /
• 2005

In this paper, the combustion characteristics of a hybrid propulsion system were studied with various L/D(length vs diameter) ratio of the single port type solid fuel. Experiments of L/D ratio change were performed for 2 cases with the fixed grain port diameter and fuel length respectively. For the First case, results show that there are no large variation for regression rates as the L/D ratio changes. And as the L/D ratio increases, the O/F ratio and thrust tends to increase. For the Second case, there are no large change for O/F ratio and thrust as L/D ratio changes. On the other hand, as the L/D ratio decreases, only the regression rate tends to increase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1025-1030
• /
• 2001

As the pre-stage of making 3D stabilizing systems, at this paper designed 2D stabilizing system. This is composed of two axes stabilizing platform to preserve targeted direction while vehicle is moving. The system maintains stabilization by recovering error using the rate gyro with DSP TMS320F240 as controller, vibratory rate gyro (Tokimec co. TFG -l60D) as gyro scope, SD1015B52-1·SD1004C04-l/DM1015B DM1004C as direct drive driver/motor, PI control as control algorithm. This paper got a comparably good stabilization.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.31-38
• /
• 2005

In this paper, the combustion characteristics of a hybrid propulsion system were studied with various L/D(length vs diameter) ratio of the single po.1 type solid fuel. Experiments were performed for 2 cases with the fixed grain port diameter and fuel length respectively. For the first case, results show that there are no large variations for regression rates as the L/D ratio changes. And as the L/D ratio increases, the O/F ratio decreases and thrust, characteristic velocity tends to increase. For the second case, there is no large change for O/F ratio, thrust and characteristic velocity as L/D ratio changes. On the other hand, as the L/D ratio decreases, only the regression rate tends to increase. Experimentally, exponent n in $\dot{r}=a{G_0}^n$ was found about 0.5 and then the O/F ratio was shown nearly constant. In the experiment, PE and gas oxygen were used as a fuel and an oxidizer.

• KSBB Journal
• /
• v.13 no.6
• /
• pp.675-680
• /
• 1998

In both 7L and 20L fermentor experiments the level of dissolved oxygen (D.O) strongly affected growth and PHBV production of Azotobacter vinelandii UWD. A higher D.O. increased carbon substrate consumption rate and cell growth rate with a similar residual biomass production. However, a lower D.O. was a much better condition for PHBV production. In a 20L fermentor experiments controlled at 5% D.O. cell growth rate was about twice faster(0.555 hr-1 and 0.260 hr-1 at the acid and the glucose phase, respectively) with an equal amount(4.5 g/L) of residual biomass production. However, PHBV content in the cell(62.3 wt%) increased 17.3 times at 1% D.O.