• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.101-110
• /
• 2008

Metal nanohoneycomb structures were fabricated by E-beam evaporation and a two-step anodization process in phosphoric acid. Their tribological properties of adhesion and friction were investigated by AFM in relation to the pore size of the nanohoneycomb structures. Variations of the adhesive force are not found with pore size, but formation of the pore greatly reduces the adhesive force compared to the absence of pore structure. The coefficient of friction increased nonlinearly with pore size, due to surface undulation around the pore. Tribological properties do not differ greatly between the original nanohoneycomb structure and the metal nanohoneycomb structure.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.840-845
• /
• 2004

In many applications, piezoelectric motor has been used in the areas where excellent controllability, fine position resolution are required or magnetic field noise should be eliminated. However the piezoelectric motor has two major demerits. One is difficulty in maintaining vibration amplitude constantly with temperature rise and wear, and the other is heat generation induced by dielectric and mechanical loss. In this thesis, piezoelectric motor to overcome these problems is proposed. And proposed piezoelectric motor is operated using momentum exchange between bimorph and rotor. To maximize steady state velocity and static torque of proposed motor, the guideline is established using two bimorph models. Then the guideline is partially proved by comparison between simulation and experiment. There was no heat generation in the few hours of experiments.

• Investigative Magnetic Resonance Imaging
• /
• 제23권4호
• /
• pp.385-389
• /
• 2019

Schwannoma or neurilemmoma is a benign peripheral nerve sheath tumor that arises from Schwann cells. Approximately 25-45% of all schwannomas occur in the head and neck regions, and the intraoral presentation of these is only 1%. We report a rare case of a patient presenting tongue base schwannoma with characteristic imaging features on computed tomography and magnetic resonance imaging.

• Journal of Fisheries and Marine Sciences Education
• /
• 제28권5호
• /
• pp.1198-1208
• /
• 2016

The social responsibility of companies helps to produce profits through the brand asset provoking consumers' purchase intention. This study examines the perspective of the social responsibility of fishery companies and empirically analyzes the relationship between the social responsibility and customer loyalty. The study shows the four main results. Firstly, the social responsibility of fishery companies significantly affects the brand asset. Secondly, the brand asset and bland image partially affects the customer loyalty. However, the brand awareness and perceived quality of products do not significantly affect the repurchase intention. thirdly, the social responsibility of fishery companies significantly affects the customer loyalty. Finally, the social responsibility of fishery companies and the customer loyalty have a moderating effects by general firms and fishery firms(fishery distribution, fishery processing and production company).

• Journal of Institute of Control, Robotics and Systems
• /
• 제16권2호
• /
• pp.158-163
• /
• 2010

In this paper, we propose the location measurement algorithm of unknown tag based on RFID (Radio-Frequency IDentification) by using RSSI (Received Signal Strength Indication) and TDOA (Time Difference of Arrival) and extended Kalman filter in smart space. To do this, first, we recognize the location of unknown tag by using the RSSI and TDOA recognition methods. Second, we set the coordinate of the tag location measured by using trilateration and SX algorithm. But the tag location data measured by this method are included complex environmental error. So, we use the extended Kalman filter in order to revise error data of the tag location. Finally, we validate the applicability of the proposed method though the simulation in a complex environment.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.117-121
• /
• 1998

The Rapid Expansion of supercritical fluid Solutions (RESS) process was applied to particles coating. Experiments were conducted in a fluidized bed with an internal nozzle in the center of the reaction tube. Microcapsules (mean particle size : 49$\mu\textrm{m}$) prepared by spray drying method were used as the core particles. Supercritical CO2 solutions of paraffin were expanded through the nozzle in to the bed that was fluidized by air. Surface morphology prepared particles was observed by SEM. For the inspection of particle size change, particle size distributions were measured before and after coating. The releasing behavior of Mg2+ ions inspected by AA.

• Proceedings of the Korean Magnestics Society Conference
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.433-440
• /
• 2000

Barium ferrite particles were synthesized from Ba(NO$_3$)$_2$, Fe(NO$_3$)$_3$ and KOH mixed solutions using hydrothermal crystallization in supercritical water. The experimental apparatus for production of barium ferrite is a flow-type apparatus. Fine barium ferrite particles were produced because supercritical water causes the metal hydroxides to be rapidly dehydrated before significant growth takes place. The effects of Fe/Ba ratio and reaction time on the formation, particle size, and magnetic properties of barium ferrite were studied. When Fe/Ba ratio were varied from 0.5 to 12, single-phase barium ferrite powder was only produced in the range of 0.5〈Fe/Ba〈2. Also, with elevating reaction time, the BaO.6Fe$_2$O$_3$ particle size grew smaller. Especially, uniform barium hexaferrite particles of size 100-200nm were obtained at 80sec. In this study, therefore, single-phase barium ferrite particles are highly stable and can be produced continuously in a reaction time of less then 2min.

• Journal of Convergence Society for SMB
• /
• 제4권4호
• /
• pp.25-29
• /
• 2014

Security is a primary concern in group communication, and secure authentication is essential to establishing a secure group communication. Most conventional authentications consist of knowledge-based and token-based methods. One of the token-based methods is a X.509 certificate, which is used under a Public Key Infrastructure (PKI); it is the most well-known authentication system in a distributed network environment. However, it has a well-known weakness, which only proves the belonging of a certificate. PKI cannot assure identity of a person. The conventional knowledge-based and token-based methods do not really provide positive personal identification because they rely on surrogate representations of the person's identity. Therefore, I propose a secure X.509 certificate with biometric information to assure the identity of the person who uses the X.509 certificate in a distributed computing environment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제4권3호
• /
• pp.9-18
• /
• 2008

Mobile devices do not need the fixed network infrastructure in ad-hoc network, these devices communicate each other through the distributed control. Accordingly, mobile devices can discover several services using dynamic searching method and provide safely public ownership of these services. Ad-hoc network needs the distributed control and topology of dynamic network because the limited power for processing and network communication. This paper is devoted to provide the secure protocol that provides efficient services discovery using SDP(Service Discovery Protocol) and considers the security requirements. Proposed protocol provides the distributed control based on PKI without central server, the discovery of trusted service, secure telecommunication, the identification among mobile devices, and service access control by user authority.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.124-129
• /
• 1994

We have developed a stabilizing SMES with 0.5MJ energy storage capacity through all the research process of the system planning, magnet drawing, which including various kinds of evaluation for the optimized system organization. This research performance is considered to be very distinguished one. Besides, the acquired knowledge and many experiences getting through the performance of the study are much benefitful to other studies concerning with a development of superconducting electrical power machines. This paper gives the general presentation of the study and many kindes of expermental results including analysis of them.