• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1993

In this paper, an offset paraboloidal reflector antenna satisfied efficiency of over 60% and sidelobe envelope line of 29-25$log\theta$ was designed and manufactured for Ku-band VSAT(Very Small Aperture Terminal) antenna. The radiation patterns of experimental antenna were computed by applying the series expansion method using the Zernike polynomials. The measured patterns are in good agreement with the computed results. The Gain, efficiency, and sidelobe envelop line fairly well satisfy the design specifications except first sidelobe level.

• Journal of Photoscience
• /
• v.9 no.1
• /
• pp.29-32
• /
• 2002

The solvent effect in a series of polar and non-polar solvents of varying dielectric constants and refractive indices has been investigated by studying electronic spectra (S$_1$band) of a series of exalite laser dyes at room temperature (25$\pm$1$\^{C}$). These data are used to determine the magnitude ($\mu$$\_$e/) and direction ($\theta$) of the electric dipole moments in the first electronically excited state. The results indicate that the observed band systems in these compounds may be attributed to ←$\pi$ transition.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.96-99
• /
• 2003

This paper presents the development of a Ku-band Low Noise Amplifier with the Noise figure of 1.4dBmax, the gain of 35dB, and the In/Out Return toss of -22dB/-18dB in the frequency range from 14 to 14.5GHz for Satellite transponders. All RF components were assembled using a hybrid technology with 15-mil thin-film substrates. The mechanical and thermal design of the housing was performed considering a vibration and a vacuum of space environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.115-122
• /
• 2016

In this paper, wideband Ku-band downconverter was designed to receiver digital satellite broadcasting. The low-nose downconverter was designed to form four local oscillator frequencies(9.75, 10, 10.75 and 11.3 GHz) representing a low phase noise due to VCO-PLL with respect to input signals of 10.7 to 12.75 GHz and 3-stage low noise amplifier circuit by broadband noise matching, and to select intermediate frequency bands by digital control. The developed low-noise downconverter exhibited the full conversion gain of 64 dB, and the noise figure of low-noise amplifier was 0.7 dB, the P1dB of output signal 15 dBm, and the phase noise -85 dBc@10kHz at the band 1 carrier frequency of 9.75 GHz. The low noise block downconverter(LNB) for wideband digital satellite broadcasting designed in this paper can be used for global satellite broadcasting LNB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.400-409
• /
• 2017

We have studied a combiner that can withstand high power while minimizing insertion loss in high frequency band. In particularly, because the output power that can be output per unit elements is much lower in the Ku band and above than in the low frequency band, it is necessary to combine many semiconductor elements in order to make a high power SSPA. A planar combiner such as a microstrip, as the number of elements to be combined increases, the insertion loss increases proportionally, resulting in a reduction in the overall system efficiency and an increase heating value also. The planar combiner also have some problems due to the low power handling rate. To improve these problems, we proposed a Cavity Radial Combiner. A Ku band 16-way Cavity Radial Combiner was fabricated and measured. As a result, it was tested 14dB return loss and over 94.5 % output combining efficiency in design band.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3201-3206
• /
• 2012

In this paper, the simplified design methodology for rotation of polarization plane using a square waveguide is proposed. In order to optimize the characteristics of $180^{\circ}$ polarizer operating from 14.3GHz to 14.8GHz in Ku-band, the modified mode matching method and piecewise power tower interpolation are applied to the polarizer design. The optimized results show that the frequency bandwidth in VSWR<2 has covered 500MHz in the Ku-band and phase difference between two orthogonal modes $TE_{10}$and $TE_{01}$ is $180^{\circ}{\pm}1^{\circ}$ in the range of 14.3GHz~14.8GHz. The cross polarization loss has obtained below 40dB and the insertion loss has 0.1dB in the passband. Therefore, the proposed polarizer is suitable for practical Ku-band system requiring the low VSWR and compact size.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.46-53
• /
• 2014

In this paper, ku-band RF transceiver system is designed for the unmanned aerial vehicle(UAV) line-of-sight(LOS) datalink. The RF transceiver system is consisted of the transmitting and receiving unit, RF front-end unit, and high power amplification unit. The transmitting and receiving unit has the functions of frequency up/down converting and channel changing. The RF front-end unit has the functions of transmitting and receiving signal duplexing, antenna selection, small signal amplification, and frequency filtering excluding the receiving signal. The high power amplification unit has the functions of ku-band power amplification and transmitting power variation(High/Middle/Low/Mute). The frequency up/down converting of transmitting and receiving unit is designed by using the superheterodyne method. The RF transceiver system is designed to obtain the broadband and high linearity properties for the reliable transmission and reception of high data-rate and high speed data. Also, the channel changing function is designed to use selectively the frequency as the operation environment of UAV.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.380-386
• /
• 2014

In this paper, a higher-order mode coupler using coaxial-structure waveguide for Ku-band monopulse satellite tracking is proposed. The proposed higher-order mode coupler is built in a coaxial structure for compactness and weight reduction, making it suitable for mobile tracking systems. The inner circular waveguide of coaxial-structure is used to extract the fundamental mode signal and the high-order mode signal is extracted from the four slots of the outer circular waveguide and then transmitted via given stepped rectangular waveguide structure. The simulated results show that proposed higher-order mode coupler covers 250 MHz(12.75 GHz ~ 13.00 GHz) bandwidth with return loss and insertion loss characteristics. The antenna patterns of fundamental mode and higher-order mode applicable to monopulse tracking are generated successfully. Designed higher-order mode coupler using coaxial waveguide structure for Ku-band is expected to be used for high precision monopulse satellite tracking systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.393-400
• /
• 2003

This paper deals with the design and manufacturing technique of EQM(Engineering Qualification Model) of input multiplexer(IMUX) for the Ku-band satellite transponder. Channel dropping method by circulator chain structure is adopted for demultiplexing each channel. External equalizers are attached behind channel filters fur reduction of group delay variation and amplitude variation simultaneously. Both channel filters and equalizers adopted dual-mode technique in design f3r mass and volume reduction. Channel filters are designed to have 8-pole elliptic response and equalizers to be of 2-pole reflection type. For good temperature stability characteristics, INVAR36 material is used for channel filters and external equalizers. Vibration test, Thermal Vacuum Test, and EMC test have been performed on input multiplexer and it is shown to be suitable for Ku-band satellite transponder.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.65-71
• /
• 2023

In this paper, the design, fabrication and verification steps of an electronically scanned array antenna(AESA) for a photonics-based Ku-band FMCW radar system is described. The presented system consists of a transmitter and a receiver respectively, which has a same antenna in the transceiver. The designed antenna has 2×8 array configuration and operates at Ku-band. The VSWR(Voltage Standing Wave Ratio) of each 16-radiators and the coupling power between radiators is measured. Also, in order to minimize the radar system damage because of handover power from the transmitter antenna to the receiver antenna when the transmitter works, the isolation between the transmitter antenna and the receiver antenna is optimized by test. As a result, beamwidth, side lobe level and beam steering characteristic are obtained by synthesizing each radiator pattern measurement data after each beam pattern of 16-radiators is measured in the near-field chamber.