• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.67-76
• /
• 2006

Three-dimensional information of submarine topography was acquired by assembling DGPS and Echo Sounder, which is mainly used in the marine survey. However, the features of submarine topography, derived according to mechanical data, were confirmed using human eyes. Because the dredging capacity using a submarine surveying data influences harbor public affairs, analysis and the process method of surveying data is a very special element in construction costs. In this study, information on submarine topography is acquired by assembling DGPS and Echo Sounder. Moreover, the dredging capacity in harbor public affairs has been analyzed by the interpolation method: inverse distance to a power, kriging, minimum curvature, nearest neighbor, and radial basis function. Also, utilization of DGPS and Echo Sounder method in calculation of the dredging capacity have been confirmed by comparing and analyzing the dredging capacity and the actual one, as per each interpolation. According to this comparison result, in the case of applying Radial basis function interpolation and Kriging, 3.94 % and 4.61 % of error rates have been shown, respectively. In the case of the study for application of the proper interpolation, as per characteristics of submarine topography, is preceded in calculation of the dredging capacity relevant to harbor public affairs, it is expected that more speedy and correct calculation for the dredging capacity can be made.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.133-139
• /
• 1999

The geostatistical method Kriging is used to estimate the areal distributions of the depth to the water table and the altitude of the water table measured from the sea level. A northern part of the city of Pohang, Kyeong-Buk, Korea has been chosen and the digital map of the area with 1:5,000 scale from the National Geographic Information System (NGIS) project by National Geographic Institute has bun used to reproduce the ground surface distribution. The water table depth appears to be in the range between 7 m and 9.5 m except a few localities where mountain tops exist and the use of groundwater for agicultural purposes is believed to be heavy. The overall distribution of the water table altitude shows a monotonic gradual decrease from the west to the east (seaward direction from the inland) and to the south with maximum rate approximately at 90 m over 6 km in horizontal distance and indicates that the groundwater is moving several meters per day there.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.381-381
• /
• 2018

우리나라에서는 지속적인 자연재해로 각기 다른 필요성과 목적에 따라 다양한 형태의 홍수 침수 관련 지도가 작성되어 왔다. 연구 성과로 작성된 계획 빈도 및 상위 2개 빈도의 호우피해예상도를 실측 강우와 연계하여 재난관리단계별 대응단계에 활용하기 위해 실시간 피해위험구역을 표출하고자 한다. 본 연구는 실시간으로 피해위험구역을 표출하기 위해 실측 강우와 연계된 호우피해예상도에 공간 보간 알고리즘을 적용하고자 한다. 호우피해예상도란 돌발호우나 태풍으로 인하여 홍수가 발생하면 인명 및 재산피해를 최소화하기 위해 홍수지역을 미리 예측 가능하도록 제작된 지도이다. 지형자료(DEM), 하천 중심선(Stream Centerline), 하천 횡단면(Cross-Section Line), 제방고(Bank), 수문기상 자료(Hydrological Data), 조도계수(Roughness) 등을 사용하여 하천법 제 21조와 하천법시행령 제 17조를 근거로 작성된다. 본 연구에서는 호우피해예상도에 IDW(Inverse Distance Weighted, 역거리가중법) 보간, TIN(Triangulated Irregular Network system, 불규칙삼각망) 보간, Kriging 보간 방법 적용 알고리즘을 제시하고자 하였다. 호우피해예상도에 보간 알고리즘을 적용하기 위해 보간 방법에 따른 적용사례를 분석하였으며 그 결과, 보간 알고리즘을 적용한 호우피해예상도 보간을 통하여 계획빈도 및 상위 2개 빈도 이외의 빈도(하위빈도-계획빈도, 계획빈도-상위빈도 구간)에 대한 호우피해예상도의 피해위험구역 구현 방안을 제시하였다. 호우피해예상도에 IDW, TIN, Kriging 보간 알고리즘을 적용하여 계획빈도 및 상위빈도 이외의 빈도에 대한 피해위험구역을 표출 할 수 있다. 표출된 계획빈도 및 상위빈도 이외의 빈도를 지점확률강우량-빈도에 대한 Matching table을 통하여 실측 강우와 연계 가능하다. 본 연구 결과는 추후 풍수해피해예측시스템에 활용하여 재난관리단계별 예방 및 대응 단계에 활용 할 수 있을 것으로 판단된다.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.379-394
• /
• 2021

Air pollution data in South Korea is provided on a real-time basis by Air Korea stations since 2005. Previous studies have shown the feasibility of gridding air pollution data, but they were confined to a few cities. This paper examines the creation of nationwide gridded maps for PM10 concentration using 333 Air Korea stations with variogram optimization and ordinary kriging. The accuracy of the spatial interpolation was evaluated by various sampling schemes to avoid a too dense or too sparse distribution of the validation points. Using the 114,745 matchups, a four-round blind test was conducted by extracting random validation points for every 365 days in 2019. The overall accuracy was stably high with the MAE of 5.697 ㎍/m³ and the CC of 0.947. Approximately 1,500 cases for high PM10 concentration also showed a result with the MAE of about 12 ㎍/m³ and the CC over 0.87, which means that the proposed method was effective and applicable to various situations. The gridded maps for daily PM10 concentration at the resolution of 0.05° also showed a reasonable spatial distribution, which can be used as an input variable for a gridded prediction of tomorrow's PM10 concentration.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.1
• /
• pp.40-46
• /
• 2013

Recently, the duct system with a cross flow fan was used to improve the ventilation in various industrial fields. For the efficient ventilation, it is necessary to design the duct system based on the flow characteristics around the cross flow fan. In the present study, the flow characteristics around a cross flow fan in the ventilation duct were predicted by using the moving mesh and sliding interface techniques for the rotation of blades. To design the duct system with the high performance of ventilation, the CFD simulations were repeated with the revised duct model based on the DOE. With the numerical results of flow rate through the ventilation duct with various geometric parameters, the optimized geometry of ventilation duct to maximize the flow rate was obtained by using the Kriging approximation method. From the performance curves of cross flow fan in the original and optimized models of ventilation duct, it was observed that the flow rate through the optimized model is about 16 percent larger than that through the original model.

• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.275-287
• /
• 2005

At the planning and design stages of a development of underground space or tunneling project, the information regarding ground conditions is very important to enhance economical efficiency and overall safety In general, the information can be expressed using RMR or Q-system and with the geophysical exploration image. RMR or Q-system can provide direct information of rock mass in a local scale for the design scheme. Oppositely, the image of geophysical exploration can provide an exthaustive but indirect information. These two types of the information have inherent uncertainties from various sources and are given in different scales and with their own physical meanings. Recently, RMR has been estimated in unsampled areas based on given data using geostatistical methods like Kriging and conditional simulation. In this study, simulated annealing(SA) is applied to overcome the shortcomings of Kriging methods or conditional simulations just using a primary variable. Using this technique, RMR and the image of geophysical exploration can be integrated to construct the spatial distribution of RM and to evaluate its uncertainty. The SA method was applied to solve an optimization problem with constraints. We have suggested the practical procedure of the SA technique for the uncertainty evaluation of RMR and also demonstrated this technique through an application, where it was used to identify the spatial distribution of RMR and quantify the uncertainty. For a geotechnical application, the objective functions of SA are defined using statistical models of RMR and the correlations between RMR and the reference image. The applicability and validity of this application are examined and then the result of uncertainty evaluation can be used to optimize the tunnel layout.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.279-286
• /
• 2003

Many trials to set up the correlation between the rock mass classification and the earth resistivity have been carried out to design tunnel support type based on the interpreted electrical resistivity acquired by surface electrical survey. But it is hard to find reports on the comparison of the real rock support type determined during the excavation with the electrical resistivity by the inversion of the survey data acquired before the tunneling. In this study, the rock mass classification based on the face mapping data and the resistivity inversion data are investigated to see if it is possible to design reliably the rock support type based on the surface electrical survey. To get the quantitative correlation, rock engineering indices such as RCR(rock condition rating), N(Rock mass number), Q-system and RMR(rock mass rating) are calculated. Since resistivity data has low resolution, Kriging method as a post processing technique which minimizes the estimated variance is used to improve resolution. The result of correlation analysis shows that the 2D electrical resistivity survey is appropriate to see the general trend of the geology in the sense of rock type, though there might be some local area where these two factors do not coincide. But the correlation between the result of 3D survey and the rock mass classification turns out to be very high, and then 3D electrical resistivity survey can make it possible to set up more reliable rock support type.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.384-390
• /
• 2018

This paper introduces a MATLAB graphical user interface (GUI) based software for analysis of korea augmentation satellite system (KASS) availability performance. This software uses minimum variance (MV) estimator and Kriging algorithm to generate integrity information such as user differential range error (UDRE) and grid ionospheric vertical error (GIVE). The information is offered to ground and aviation users in Korean region. The software also gives accuracy data, protection level data and availability map about each user position by using the integrity information. In particular the software calculates the protection level along a path of aircraft. We verified the result of protection level of aviation user by comparing them with the results of SBASimulator#2, which is a simulation tool of european geostationary navigation overlay service (EGNOS). As a result, the protection level error between the result of our software and the SBASimulator#2 was about 2% which means that the result of our software is accurate.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.5-19
• /
• 2001

We are able to construct and utilize DEM(Digital Elevation Model) throughout the NGIS(National Geographic Information System) project. It is important that interpolation methods and appreciate size of grid for the construction of accurate DEM(Digital Elevation Model). There were several references related to the DEM(Digital Elevation Model) construction method, however they couldn't consider various topographical characteristics in the korea. In this study, we recommended that suitable interpolation method for each topographic element. After dividing Poonggi area into mountain, hill, urban, agricultural land, we constructed DEM(Digital Elevation Model) with various interpolation methods and grid size using 1:5,000 digital map. Then evaluated accuracy using elevation data which extracted from air-photo. The interpolation methods were analyzed and compared for various topographical conditions. As a result, Kriging method was superior to TIN method for all the topographical conditions. Another experiment was performed to examine optimal grid space for DEM with each topographical condition. 10m grid space was most suitable for mountain area and hilly districts, while 30m grid space was most suitable for urban area and farm land.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.1
• /
• pp.21-28
• /
• 2017

Optimization process of pre-swirl nozzle geometry was conducted to improve the discharge coefficient of pre-swirl system by using CFD. The optimization of pre-swirl nozzle shape covered the converging angle and the location of the converging nozzle. Optimization process included Optimal Latin Hyper-cube Design method to get the experimental points and the Kriging method to create the response surface which gives candidate points. The process was finished when the difference between the predicted value and CFD value of candidate point was less than 0.1 %. This paper compared the Reference model, Initial model which is the first model of optimization and Optimized model to study flow characteristics. Finally, the discharge coefficient of Optimized model is improved about 17 % to the Reference model.