• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.45-52
• /
• 2007

Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2010.04a
• /
• pp.195-206
• /
• 2010

Xylan can be applied to improve the strength properties of paper; however the optical properties, such as brightness, are decreased significantly. To solve that problem, an applicable bleaching process is therefore desired. The aim of this research was to investigate the impact of hydrogen peroxide bleaching on hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (whiteness, brightness, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. Hydrogen peroxide bleaching, as a kind of totally chlorine free (TCF) bleaching method, is quite important industrially for chemical pulp. In our work, the process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied. The results showed that both good mechanical properties and optical properties could be achieved when the operating parameters were controlled properly and therefore hydrogen peroxide bleaching was proved to be a suitable method for bleaching hardwood kraft pulp with adsorption of birchwood xylan.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.47-56
• /
• 1999

Tensile energy absorption in paper has long been measured as the area under the load-elongation curve. Little effort has been made to define where and how that energy is used within the paper itself. Characterization of tensile energy absorption in paper is discussed. Multiple small elements within newsprint and kraft sack have been defined and the energy absorbed in those elements are discussed. The tensile profiles of the weak paper, newsprint, and the tough paper, kraft sack, are presented as separate strain profiles, stress profiles, and strain energy density profiles. This allows a complete analysis of the energy absorption of both papers for comparison or contrast.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.331-336
• /
• 2006

The aim of this work was to inhibit the heat-and moisture-induced yellowing of ECF/TCF bleached hard wood kraft pulp (HBKP) retaining hexenuronic acid (HexA). We have already reported that one of the derivatives of HexA, 5-formyl-2-furancarboxylic acid (FFA), causes yellowing of HBKP in acidic paper, and that FFA might polymerize or react with pulp components to form new chromophoric groups (1). In this study, it was shown that the carboxylic base of FFA interacts with that of glucuronic acid or galacturonic acid, resulting in strong yellowing. Therefore, it seems that preventing the reaction of carboxylic bases could be effective in suppressing this yellowing. We have discovered that polycarboxylic acids (for example, citric acid, tartaric acid, etc.) are useful as a yellowing inhibitor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.406-409
• /
• 2002

The primary insulation system used in an oil-filled transformer is Kraft paper, wood, porcelain and, of course, oil. Modern transformers use paper that is chemically treated to improve its tensile strength properties and resistance to aging caused by immersion in oil. These insulation papers are mainly aged to thermal stress. Over the course of the insulation paper and oil's life it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper using the layer insulation. We made two aging cell in which thermal aging tests of insulation papers and mineral oil are conducted. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.79-88
• /
• 2005

This research studied the utilization of the bed log wastes as a papermaking grade pulp. Five different bed log samples from shiitake mushroom (Lentinus edodes (Berk.) Sing) cultivation were collected by the cultivating periods of 1 to 5 years. The wood chemical composition and the characteristics of kraft pulping of each sample were investigated. The results of chemical composition showed that the rate of carbohydrate (glucose and xylose) content in sapwood was decreased as the cultivation period was increased. In heartwood, there was no significant difference. The screening yield of non-cultivated bed log from kraft pulping was higher than that of cultivated one, but the reject of cultivated one, especially for 5 year-cultivated, was lower than non-cultivated bed log. The fiber length and width was continuously decreased as the cultivation period was increased. Therefore, the freeness of the pulp from the cultivated bed log was sharply decreased comparing to non-cultivated due to the fiber cutting and the increased fine content. The dry strengths were increased according to the increasing addition level of bed log kraft pulp to KOCC and non-cultivated wood pulp. From the overall results, the pulp from 5 years cultivated bed log can be reasonably used if it is mixed with long fiber pulp for advantages such as reducing beating time.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.167-172
• /
• 2006

High-yield Pinus radiate kraft pulps with various Kappa number were produced from flow-through laboratory pulping. The samples were prepared and scanned using a rapid scan photoacoustic Fourier transform infrared (PAS-FTIR) spectrometer. A partial-least-squares (PLS) model was established based on the spectral data collected at different mirror velocities. The model was used to predict the Kappa number of the pulps and its robustness was statistically evaluated. The outcomes indicate that the PLS model can be used to predict the Kappa number of Pinus radiata kraft pulps with a high degree of accuracy provided that the moving mirror velocity is ${\leq}\;0.5cm/s$.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.39-46
• /
• 2000

In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.56-62
• /
• 2005

The catalytic effect of molybdovandophosphate heteropolyanion (HPAs) on the delignification of kraft bagasse pulp by hydrogen peroxide has been investigated. Very small amounts of the catalyst (0.05 0.3 mM/l) gave convenient results. Partial reduction of the catalyst was also studied. The effect of reaction medium (water, ethyl alcohol and acetone) on the bleaching was also studied. The results obtained show that the optimum condition for bleaching in presence of polyoxometalate were 0.05 mM/l catalyst concentration at $70^{\circ}C$ reaction temperature and $7\%$ consistency at pH 2 in aqueous medium. The ratio of water to solvent of 60:40 from acetone gives higher brightness than ethyl alcohol. The catalyst solution can be reused for 5 times without any reduction in brightness. ESR for the blank and exhausted solutions under different conditions was also carried out to find the relation between reduced metals and pulp brightness.