• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.1-10
• /
• 2006

The objective of this study was to elucidate the microscopic patterns of decay caused by brown-rot fungi of Tyromyces palustri and Gloeophyllum trabeum in Korean red pine (Pinus densiflora) and radiata pine (Pinus radiata) woods through light and electron microscopies. The ultrastructural changes of cell walls attacked by the two brown-rot fungi were compared in this respect. Macroscopically, radiata pine showed more ring and radial checks than Korean red pine. Microscopically, with the progress of decay, spiral checks associated with cross-field pits and bore holes in the cell wall were more remarkably numerous in the radiata pine than in the Korean red pine. In the radiata pine, G. trabeum produced more spiral checks in the cell wall than T. palustris. In the advanced stages of decay by G. trabeum, the erosions of ray cell walls were identified both in the Korean red pine and radiata pine but $S_3$ layers of tracheid walls were eroded only in the Korean red pine.

• Journal of Korean Society of Forest Science
• /
• v.6 no.1
• /
• pp.1-5
• /
• 1967

We studied on the bark Percentage of red pine (Pinus denssiflora S & Z) and tarch (Larix Kaemdferi sargent) and obtained the results as follows: (1) For diameter classes from 8 to 38 cm in red pine. the linear equation adopts the relation of the bark percentage to the diameter more accurately than the logarithmic equation. (2) The difference between the regression equation of the bark percentage between red pine and Larch is significant and the correlation cofficient in red Pine is high so that standard error of red Pine is lower than its value of Larch. We established, therefore the tables of bark percentage for each species by applying the following regression equations. red Pine Y=10.08205-0.08794x Larch Y=10.3527-0.17071x.

• The Korean Journal of Ecology
• /
• v.1 no.2
• /
• pp.66-71
• /
• 1977

The growth of red and black pines in Muan, Seochen, Gapyeong and Kochang areas was compared by means of the growth of annual ring width and stem analysis to study the process of damages caused by pine needle gall midge. Red pine forest of Seocheon area began to suffer by pine needle gall midge from 1961 and the damage was to becoming severe from 1967. The damage became so intense tha tmany forests are withering to death from spring of 1975. Black pine forest also began to suffer from 1973. Red pine forest of Muan area was supposed to be suffered from 1973. Red pine forest of Kochang area suffered by pine needle gall midge from 1967. It seems that the damage became severe from 1973 and that black pine forest was also badly damaged from that time. Red pine forest of the control plot, Gapyeong area, began to suffer from 1967 and it also became intense from 1973. Although the areas of Seocheon, Muan, Kochang, and Gapyeong are different from each other in terms of locality and the infitration period of pine needle gall equally from 1967 due to mass development of population or other factors and the damage became more intense from 1973. Black pine forest was also badly damaged from that time. Black pine seems to be stronger in insect resistant than red pine. This can be justified by the fact that it began to suffer belatedly in each area and the degree of damage is moderate. The damage of Seocheon area is the severest following Kochang. Muan area is relatively moderate but the forest becoming decrease in growth.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.96-103
• /
• 2003

This study was conducted to evaluate the tensile properties of metal plate connector for the domestic major softwoods, such as Korean red pine, Korean white pine, and Japanese larch. The maximum tensile load of Korean red pine was 3,612kgf in AA type, it was 1.2 and 1.7 times higher load than that of Japanese larch and Korean white pine. In EA type, it was 2,704kgf, and 1.1 and 1.5 times higher than the loads of Japanese larch and Korean white pine. The failure modes of metal plate connector were metal plate withdrawal, plate tensile failure, and wood shear block failure. The failure mode of Korean red pine connector was tensile failure of plate, that is reason of the high tensile load resistance for metal plate connections in Korean red pine. The mechanical properties of metal plate connector could be predicted by the Foschi model parameter. In the initial stage, the Korean red pine connector was stiffer than the other species. The design values for metal plate connector per tooth was 25, 22, and 15kgf for Korean red pine, Japanese larch, and Korean white pine in AA type and 19, 17, and 13kgf in EA type.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1047-1053
• /
• 2010

This study was conducted to evaluate the effects of dietary Korean red pine bark extract as an antibiotic replacement on cecum microflora, immune functions, blood lipids, carcass characteristics, and growth performance in broiler chickens. There were four treatment groups: a control group, an antibiotic group, and two treatment groups receiving 65 and 80 ppm Korean red pine bark extract. Growth performance, carcass weight, dressing percentage, and breast and thigh muscle weight of the broiler chickens fed 80 ppm of red pine bark extract was higher than the broilers of the control group and the antibiotic group. Abdominal fat was lower in both groups of broiler chickens fed red pine bark extract, but the growth of immune organs such as the thymus, spleen, and bursa of Fabricius was significantly higher in the group that received a diet supplemented with 80 ppm red pine bark extract than in the control group and antibiotic group. Concentrations of triacylglyceride and total cholesterol were significantly lower in both groups that received red pine bark extract when compared to the control group and the antibiotic group. The concentration of serum IgG was significantly higher in the 80 ppm red pine bark extract group than in the control group and the antibiotic group. The numbers of Bifidobacterium and Lactobacillus in the cecum digesta were significantly increased, while the numbers of Escherichia coli and Salmonella were significantly reduced in the group that received 80 ppm red pine bark extract when compared to the control group and the antibiotic group. These results suggest that the a diet with 80 ppm Korean red pine bark extract as a replacement for antibiotics improve the cecum microflora, immune functions, blood lipids, carcass characteristics and growth performance of broiler chickens.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.543-548
• /
• 1998

Portions of chloroplast genes(psbD and rbcL) were amplified from Pinus thunbergii(Japanese black pine : black pine) and Pinus densiflora(Japanese red pine : red pine) by PCR and digested by a restriction enzyme, HaeIII, respectively. Two species specific cpDNA markers were identified. With the observed cpDNA markers, paternal inheritance of cpDNA in pine hybrids was verified in an artificial hybrid family between black pine(Chollanam 37) and red pine(Chungchongbuk 3). On the basis of paternal inheritance of chloroplast genome in a hybrid, 2 portions of cpDNA amplified from 115 individuals of Pinus densiflora for. erecta were screened to detect any traces of black pine specific cpDNA markers in P. densiflora for. erecta which has been postulated as an introgressive hybrid between red pine and black pine(Hyun el al., 1967). All the analyzed individuals of Pinus densiflora for. erects revealed the identical profiles of HaeIII digested psbD and rbcL genes to red pine. This result suggests that there is no introduced chloroplast genome of black pine in Pinus densiflora for. erecta and that there is no concrete evidence of treating P. densiflora for, erecta as an introgressive hybrid between red pine(♀) and black pine(♂).

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.53-66
• /
• 1987

Korean red pine (Pinus densiflora S. et. Z.) and pitch pine(Pinus rigida Mill) $5{\times}10cm$ dimension lumber were dried in a kiln providing a cross-circulation velocity of 5 m/sec at dry-and wet-bulb temperatures of 116 and $71^{\circ}C$, followed by 3 hours at 91 and $85^{\circ}C$. Compared to dimension lumber dried lumber were as follows. 1. To dry to 10 percent moisture content, the high-temperatures schedule of Korean red pine and pitch pine lumber took less than one seventh the time required by the conventional kiln drying schedule. 2. High-temperature drying rate and conventional drying rate to 10 percent moisture content of Korean red pine lumber were 2.75 and 0.35%/hr, and those of pitch pine lumber were 3.38 and 0.46%/hr respectively. 3. Compared to lumber of both species on conventional schedule, moisture gradient of high-temperature lumber was greater. 4. Compared to lumber on conventional schedule, maximum surface checking of high-temperature lumber of both species was severer, and maximum end checking of high-temperature lumber of both species was similar to that of lumber on conventional schedule. 5. Compard to lumber on conventional schedule, Korean red pine lumber dried at high temperature showed more honeycombing, but pitch pine lumber dried at high-temperature showed significantly slighter honeycombing. 6. Compared to lumber on conventional schedule, the high-temperature lumber showed less warping lumber of both species. 7. Collapse and casehardening of Korean red pine and pitch pine lumber on both scheules were slight.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.59-65
• /
• 2005

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.689-693
• /
• 2005

Different masking materials were evaluated for their ability to ameliorate odor of model poultry manure solution by assessing their effects on sensory pleasantness and odor intensity. Results indicated extracts from Eastern red cedar leaves, Loblolly pine needles', and commercial masking agents such as pine extract and odor neutralizer were effective (p<0.05) for masking odor of model poultry manure solution by increasing (p<0.05) pleasantness (82 and 86% increases in pleasantness using red cedar and pine needle extracts, respectively) and decreasing (p<0.05) odor intensity (odor intensity reduction by 66 and 76% using red cedar pine needle extract). The most odor-active compound in Loblolly pine needle extract was ${\alpha}$-terpineol (1,573.8 ug/g) which is responsible for aroma of pine trees (piney) and effective for ameliorating agricultural odors.