• Title/Summary/Keyword: Korean red pine(pinus densiflora S. et Z.)

Search Result 45, Processing Time 0.027 seconds

Wood Anatomical Characteristics of Pine Tree (Pinus densiflora S. et Z.) Damaged by Air Pollution (대기오염(大氣汚染) 피해(被害) 소나무의 목재(木材) 해부학적(解剖學的) 특성(特性))

  • Kim, Yoon-Soo;Park, Byung-Dae;Shim, Keun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.15 no.2
    • /
    • pp.105-112
    • /
    • 1987
  • Some anatomical characterisitcs of Japanese red pine (Pinus densiflora S. et Z.) collected from pollution-exposed areas in Korea were investigated. These sites were reportedly the most severe air polluted areas in Korean peninsular. A decline in overall growth rate was apparent since the late 10-year period of growth. P. densiflora in Onsan and in Yeochon recorded in the radial growth reduction of approximately 70 and 60% respectively. The formation of earlywood in the period of air pollution was restricted, whereas the percentage of latewood increased. The maximum wood density was lower in xylem rings formed during a period of air-pollution than in rings found without pollution. Most of pine trees damaged by air pollution showed the classical type of length-on-age curve for tracheids. However, reduction in cell wall-thickness and diameter was revealed in the wood exposed to air pollutants. Nor anomalies in microstructures nor microorganisms in wood structures were found in the damaged trees.

  • PDF

Studies on the Effects of the Pine Needle Gall Midge, Thecodiplosis japonensis Uchida et Inouye, on the Growth of the Red Pine, Pinus densiflora S. et Z. (II) - Growth impact on red pine - (솔잎혹파리가 소나무생장(生長)에 미치는 영향(影響)에 관한 연구(研究)(II) - 소나무의 피해(被害) -)

  • Park, Ki Nam;Hyun, Jai Sun
    • Journal of Korean Society of Forest Science
    • /
    • v.62 no.1
    • /
    • pp.87-95
    • /
    • 1983
  • The effects of the pine needle gall midge, Thecodiplosis japonensis, on the growth of the Korean red pine, Pinus densiflora, were examined for the natural forest stands at nine locations: Seocheon-gun, Boryong-gun, and Hongseong-gun in Chooncheongnam-do, where consequence of the infestation had been different. To estimate the economic threshold level of the pine needle gall midge, the growth impacts due to the insect were examined with terminal shoot growth, and cambial growth by analyzing the growth horizontally and vertically. The results obtained are as follows: 1) In general, the growth impacts of the red pine trees were significant for the five consecutive years since damage had occurred, and its maximum retardation was shown in the second and the third years. 2) Simultaneous retardation occurred in both terminal and cambial growth of the tree, probably due to cumulative characteristics of the feeding behaviour. 3) Strong correlation was found between terminal and cambial growth of Korean red pine and this was true for the trees infested by pine needle gall midge. Thus retardation in cambial growth due to the insect may be estimated with that in terminal growth. 4) Infestation was greater on slope facing north than south even though the history of the infestation had been similar. 5) The stem volume of 13-year-old, infested Korean red pine was reduced by more than 75-85%, compared to same aged, uninfected pine in yield table. Thus, much longer period is required to recover the normal growth.

  • PDF

Anatomical Studies on the Features of Rays in Compression Wood of Korean Red Pine(Pinus densiflora S. et Z.) (소나무(Pinus densiflora S. et Z.) 압축이상재(壓縮異常材)의 방사조직(放射組織) 특성(特性)에 관한 해부학적(解剖學的) 연구(硏究))

  • Chung, Youn Jib;Lee, Phil Woo
    • Journal of Korean Society of Forest Science
    • /
    • v.78 no.2
    • /
    • pp.119-131
    • /
    • 1989
  • This experiment was executed to investigate and compare qualitative and quantitative anatomical features in compression wood, opposite wood, and side wood formed in a bent stem, a straight branch, and an exposed horizontal root of Korean red pine(Pinus densiflora S. et Z.). The respective four discs containing compression wood taken at 20cm interval both in stem and branch as well as a disc containing well developed compression wood from horizontal root were analyzed. Percentage of compression wood and eccentricity showed decreasing tendency with the increasing distance in height direction of stem and length direction of branch. The qualitative anatomical features of compression wood appeared to differ from those of side and opposite wood in very gradual tracheid transition from earlywood to latewood, roundish tracheid shape on cross surface, tracheid distortion at tip on radial surface, existence of intercellular space, and helical cavity in tracheid wall. And the differences in these qualitative features among the compression wood, opposite wood, and side wood became less intensive with the decreasing trends in percentage of compression wood and eccentricity. The quantitative anatomical features in compression wood also appeared to be wider in that respective widths of fusiform and uniseriate ray than those of opposite and side wood, but the heights of fusiform and uniseriate ray in compression wood were smaller than in opposite and side wood. The number of horizontal resin canal(fusiform ray) and uniseriate ray, however, showed no differences among the compression wood, opposite wood, and side wood. And the number of vertical resin canal in unit area, $4{\pi}mm^2$ of compression wood was fewer than that in opposite wood, whereas numerous vertical resin canals contained in a growth ring. These rays of compression wood seemed to be characterized by smaller height and wider width than those of opposite and side wood.

  • PDF

Solid Wood-Bending of Red Pine Lumber by Boiling Treatment (자비처리(煮沸處理)에 의한 소나무 곡목제조(曲木製造))

  • So, Won-Tek
    • Journal of the Korean Wood Science and Technology
    • /
    • v.19 no.3
    • /
    • pp.19-26
    • /
    • 1991
  • This study was carried out to investigate the solid wood bending properties of red pine(Pinus densiflora S. et Z.)naturally grown in Korea by boiling treatment The specimens were green and their dimension was $15\times15\times350mm$. The optimum conditions for solid wood bending processing of pine lumber are shown in Table 6 and the minimum solid bending radius was 240 mm in boiling treatment. The effects of knot on the degradation of bending processing properties were very severe and the failures of diagonal and torn grained wood were 20% and 30% respectively.

  • PDF

Tree-Ring Dating of Coffin Woods Excavated from Shinnae-dong in Seoul, Korea

  • Lee, Kwang-Hee;Son, Byung-Hwa;Park, Won-Kyu
    • Journal of the Korean Wood Science and Technology
    • /
    • v.41 no.5
    • /
    • pp.406-414
    • /
    • 2013
  • This study aims to date wooden coffins excavated from graves in Shinnae-dong, Seoul, South Korea, using dendrochronology. The species of woods used to make the coffins were identified as Pinus densiflora S. et Z., one of the major conifers in Korea. Of 12 graves, 10 were successfully dated using various red-pine chronologies of South Korea. Due to the absence of the last-formed tree ring before felling, the number of sapwood rings, used to obtain likely cutting dates, had to be estimated. The terminus post quem for two coffins without plaster frames were AD 1548 and AD 1571, respectively. Eight coffins with plaster frames yielded estimated dates from AD 1664 to AD 1799. The tree-ring dates indicated that the coffins with plaster frames in Shinnae-dong were constructed approximately 100 years later than those without plaster frames.

Study on the course of air-drying of red pine and Italian poplar boards (소나무와 이태리포플러 판재(板材)의 천연건조(天然乾燥)에 관(關)한 시험(試驗))

  • An, Soo-Gu;Lim, Hyuk-Dong;Jung, Hee-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.4 no.1
    • /
    • pp.48-53
    • /
    • 1976
  • This Study was carried out to investigate the course of air-drying and drying defects of red pine (Pinus densiflora S. et Z.) and Italian poplar (Populus eurameriana I-476) boards 1,2 and 3cm thick in the flat pile. The results are as follows. 1. Air-drying curves for red pine and Italian poplar boards were same as figure 1 and 2. These moisture contents were lower in July and August during seasoning periods. 2. Air drying time of red pine board required to dry 15 percent moisture content in one week for 1 cm board, five weeks for 2 cm board and six weeks for 3cm board respectively. In case of Italian poplar boards, in one week for 1 cm board, four weeks for 2 cm and five weeks for 3 cm board. The thickness of board influenced the time for air drying. 3. Drying defects such as checking, warping and staining happened badly in pine than in Italian poplar boards. Especially, checking was severe in thicker board and warping in thinner board.

  • PDF

The hygroscopic and swelling properties of Korean Red Pine wood (적송재(赤松材)의 흡습(吸濕)과 팽창성(膨脹性)에 관(關)하여)

  • Lee, Pill Woo
    • Journal of Korean Society of Forest Science
    • /
    • v.4 no.1
    • /
    • pp.30-32
    • /
    • 1965
  • Many kind tree species are growing in Korea. However most of them are inferior in wood qualities and production for commercial utilization except several species. Among the useful several species Red Pine (Pinus densiflora S. et. Z.) is growing in main tree species and most generally utilizing wood in korean forest. It is used widely as mine timbers, cross ties, boxes, floorings, pulpwoods, constructions and engineerings. Although this species is most useful and economical in this country, the basical properties on relation between wood and relative humidities were not studied certainly. This study was performed by need of inspection the hygroscopic and swelling properties to be apllied for physical manufacturing. According to the results the Equilibrium Moisture Contents of each relative humidity conditions are as table (3), and the swelling values of sap and heartwood are as table (4) and (5) in text. In this study sapwood moisture contents are higher than heartwood in each relative humidities conditions. Tangential and radial ratios of average swelling values are 1:1.971 in sapwood and 1:2.178 in heartwood.

  • PDF

Biomass and Net Primary Productivity of Pinus densiflora Natural Ecosystem in Kangwondo, Korea (강원도산(江原道産) 소나무천연림생태계(天然林生態系)의 Biomass 및 Net Primary Production에 관(關)한 연구(硏究))

  • Lee, Soo Wook
    • Journal of Korean Society of Forest Science
    • /
    • v.71 no.1
    • /
    • pp.74-81
    • /
    • 1985
  • Dimension analysis was used to estimate biomass and net primary production(NPP) in a 36-year-old Japanese red pine (Pines densiflora S. et Z.) natural forest in Kangwondo. Best estimation was made by the equation model of $Wt=aD^bH^c$ where Wt is weight in kg, D is DBH in cm, and H is total tree height in m. Total aboveground biomass was estimated at 198.82 t/ha. Organic matter was distributed in the Japanese red pine stand as follows ; bolewood 68.8%, live branches 16.5%, bolebark 5.4%, foliage 4.6%, dead branches 3.7%, and cones 0.6%. Net primary production was estimated at 15.87 t/㏊/yr and was distributed: bolewood 44.5%, live branches 30.9%, foliage 14.1%, current twig 7.1%, and bolebark 3.3%. Leaf efficiency was estimated at 1.876. The power equation for biomass and IVPP yielded similar results as the results for Pines densiflora in Japan.

  • PDF

Studies on the Effects of the Pine Needle Gall Midge, Thecodiplosis japonensis Uchida et Inouye, on the Growth of the Red Pine, Pinus densiflora S. et Z.(III) -Radial Growth Impact- (솔잎혹파리가 소나무생장(生長)에 미치는 영향(影響)에 관(關)한 연구(硏究)(III) -직경생장저해(直徑生長沮害)-)

  • Park, Ki Nam;Hyun, Jai Sun
    • Journal of Korean Society of Forest Science
    • /
    • v.65 no.1
    • /
    • pp.48-53
    • /
    • 1984
  • Using the Duff and Noland's method, the annual ring growth patterns of the red pine in the natural stands were examined at two locations; Seocheon, Chungnam-do where the stand had been infested with the pine needle gall midge, Thecodiplosis japonensis, during the years from 1975 to 1978, and Hongsong, Chungnam-do where had been no incidence of the insect damage. The results obtained are as follows: 1) With the normal red pine of 13 year old, the growth pattern in the oblique sequence indicates that the annual growth rates are maximum at the few terminal internodes, and decrease gradually with the downward internodes. Such characteristic of the growth pattern is not clear in the horizontal sequence of annual rings. 2) The indications of the radial growth reduction of the pine tree due to the pine gall midge infestation could be examined with any of three series at the crown level internodes; horizontal, vertical and oblique series. For the basal internodes, however, the horizontal series appeared to be inadequate for the analysis of the damage impact because it seemed to be masked by various factors other than direct effects of the damage. 3) Of the three ways of radial growth analyses, oblique sequence seems to be the most usefull, especially for the detection of the impact on growth caused by incipient or light infestation.

  • PDF

Tree-ring Dating of The Palsangjeon Wooden Pagoda at The Beopjusa Temple in Boeun, South Korea

  • Jeong, Hyun-Min;Kim, Yojung;Kim, Ji-Young;Seo, Jeong-Wook
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.4
    • /
    • pp.515-525
    • /
    • 2016
  • The Palsangjeon Pagoda is a five-story wooden building in the Beopjusa Temple area in the Songnisan national park in Chungcheongbuk-do, Korea. According to historical records, it was constructed in either AD 1605 or AD 1626. To specify the construction year more precisely, we took 41 wood samples for tree-ring analysis during repair actions in 2013; 28 from red pine (Pinus densiflora S. et Z.), 12 from oak (Quercus spp.), and 1 from fir (Abies spp.). The tree-ring boundaries became clearly visible by smoothing their cross-sectional surface and the tree-ring widths were measured under a stereo microscope. All tree-ring series were compared with each other to establish mean chronologies, which we then compared with local master chronologies established using tree rings collected from wooden elements of the Daeungjeon Hall which is the main building in the Beopjusa Temple area. As a result, it was verified that the red pines were felled in AD 1624 and in AD 1851. Moreover, it was verified that the oaks were also felled in AD 1624 based on cross-dating with the red pine chronology. We concluded that the Palsangjeon Wooden Pagoda was constructed in AD 1626, as mentioned in the historical record (Daeungdaekwangmyeongjeonbulsangki, 1630) and the letters on a purlin on the $4^{th}$ story, using oak and red pine felled in AD 1624 and repaired later on using red pine felled in AD 1851.