• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.47-78
• /
• 1999

About 440,000 $\textrm{km}^2$, about twice the size of the Korean Peninsula is covered by loess deposits in China. Along the middle reaches of the Huanghe River, mainly in Shaanxi and in Gansu province loess plateau covers vast area amounting to 273,000 $\textrm{km}^2$ Chinese studies on loess and loessial slopes are summarized. And some of the U. S. study and others are also presented for comparison.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.50-56
• /
• 2012

In this study, loess composites, loess with lanthanum and with aluminum, were made and evaluated for treatment of phosphorus removal in natural water system. Desiccation method for production of loess composite was superior to centrifugation method in obtaining high concentrated composites of lanthanum and aluminum. Washing of loess lanthanum composite by water did not deteriorat the lanthanum concentration in the composite, but this lowered the aluminum concentration of loess aluminum composite. Total of 15 and 37.5% of aluminum contents were removed after first washing treatment in aluminum loess of 0.05% and 0.1% respectively. However, no more aluminum loss was monitored with increase of washing times. Phosphorus removal efficiencies were not decreased with washed loess aluminum composite. Phosphorus removal was successfully achieved by adsorption of phosphate to loess composite at pH range of 5.0 ~ 8.0. Freundlich and Langmuir adsorption isotherm was observed in the adsorption of phosphate for loess composite. Dosages of 0.05% and 0.1% lanthanum composite for 95% of phosphorus removal could reduce its usage amount to 25% and 50%, respectively, comparing with dosage of loess alone. Dosages of 0.05% and 0.1% aluminum composite could reduce its usage amount to 48% and 63%, respectively.

• Journal of Environmental Science International
• /
• v.15 no.11
• /
• pp.1035-1043
• /
• 2006

Large scale of fish kills by red tides has been occurred every year in coastal water fisheries of Korea. To suppress red tide spreading out over the south coastal water of the Korean Peninsula large amount of loess has been applied every year because loess is known to be effective in removing red tide organisms. Effects of loess application in ecosystem of underwater near sea shore were investigated with some physical characteristics of loess. Loess used for the red tide reduction consisted of very fine particles, of which size was mostly less than 0.1 mm. Particles of loess blocked light penetration, which is essential for the underwater ecosystem. Loess also pushed pH down by the hydrolysis activities of aluminium and iron It was found that underwater ecosystems where loess was applied near sea shore were devastated. Sea plants such as sea weeds were gone leaving only their roots. Clams and snails were dead under the loess dust blanket. And fishes were not found at all where loess has been sprayed lot long time. It was found that even if loess has some capacity to reduce red tide temporarily, loess application should be slopped to protect underwater ecosystems.

• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.745-750
• /
• 2007

Large scale of loess has been applied on the south - sea shore of the Korean peninsula to treat red tides, due to many fishery's devastation by red tides every year. However, coastal ecosystem is ruined by the huge amount of loess applied every year. Almost all creatures, living under water such as sea weeds, clams, and fishes, where loess was applied, are disappearing. In this paper, alternative methods of the loess application are investigated. The amount of loess could be reduced by the alternative methods, Especially, loess mixed with calcium oxide has excellent effects to reduce Cochlodinium polykrikoides numbers. It was found that when loess is used with calcium oxide(CaO), removal efficiency of red tides is highly increased. Moreover, the amount of loess could be reduced dramatically.

• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.141-146
• /
• 2011

Loess, a natural clay, was evaluated as an adsorbent for the decolorization of Acid Orange II, an azo and reactive dye, from aqueous solution. Adsorption studies were performed at $30^{\circ}C$ and the effect of reaction time, loess dosage, initial concentration, loess particle size, pH, agitation rate were investigated to determine the optimum operation conditions. The removal efficiencies of color were measured to evaluate the effectiveness of loess. From this study, it was found that optimal reaction time was 10 min. Color removal efficiencies of Acid Orange II were increased as higher loess dosage, initial concentration and agitation rate. However, color removal efficiencies decreased when pH is high and loess particle becomes large. Adsorption of Acid Orange II fitted to the pseudo-second-order rate kinetics more than first-order rate kinetics. Langmuir and Freundlich adsorption isotherm constants and correlation coefficients were calculated and compared. It was concluded that the adsorption data of Acid Orange II onto loess fitted to the Freundlich model more than Langmuir model.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.39-46
• /
• 2003

The experiments about dyeing concentration, temperature and time were done using yellow, red and purple loess as natural inorganic dyes in order to verify a degree of dyeing, characteristics of color and fastness. The results were as following; 1. As a result of analyzing components of loess, purple loess was much than other loess in quartz component and coarse particles contained. This affected to the degree of dyeing. 2. The stronger dyeing concentration was, the more the degree of dyeing was improved, and yellow loess containing fine particles was the best in the degree of dyeing. 3. When it was dyed with raising up to $100^\circ{C}$ for 10 minutes after stirring for 20 minutes at $60^\circ{C}$, was better than on starting at $40^\circ{C}$ or $80^\circ{C}$ in the degree of dyeing. Also yellow loess was the best in these experiments. 4. Washing fastness of loess was low such as other natural dyes, but dyeing wasn't transferred to other textiles. On the other hand, light fastness of it was very excellent and rubbing fastness was relatively good as 3~3.5.

• Journal of Ginseng Research
• /
• v.34 no.4
• /
• pp.282-287
• /
• 2010

An optimized manufacturing process was developed for the production of high-quality loess red ginseng using a hybrid process in which loess (yellow earth) was incorporated into the conventional ginseng manufacturing process system. We designed conventional ginseng processing facilities and prepared the loess module by baking loess that contained 42% water at $860^{\circ}C$ for 8 h. The loess module showed excellent performance in deodorization and humidity control. The optimum steaming temperature at which maximum expansion of starch organisms occurred was 90 to $98^{\circ}C$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.10
• /
• pp.1436-1442
• /
• 2002

In this paper, the effect of the loess and mud of an inorganic substance dyed on cotton knitting fabrics have been studied The structure and chemical composition of loess and mud was analyzed. And the Far-Infrared emissivity and emission power, colorfastness, anti-bacterial properties cotton knitting fabrics dyed with loess and mud were also evaluated. The structure and chemical composion of loess and mud was almost identical structure and to be alike main components were SiO$_2$, Al$_2$0$_3$ and Fe$_2$O$_3$. The cotton hitting fabrics dyed with loess and mud have good colorfastness and anti-bacterial properties. when the dyed fabrics was after-treated with diphenyl ether, the anti-bacterial property were improved. Far-Infrared emissivity and emission power cotton knitting fabrics dyed with loess and mud have very good.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.282-285
• /
• 2008

At least 15% of the C polykrikoides cells that precipitated to the bottom layer either by the addition of loess or no addition survived for 1 week at all growth phases, rather than disappearing immediately after precipitating. However, no live cells were observed after 20 days, regardless of phase or loess addition. In the exponential phase, the number of C polykrikoides cells increased to >2886 cells/ml after loess was added. However, in the stationary phase, the number of cells did not increase until 18 days. In the exponential phase, those C polykrikoides that survived precipitation caused by scattering loess on cultures did not appear to have the ability to cause red tides again because of the short red tide periods in the field, long lag time after loess addition, and low survival rate after loess addition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.971-979
• /
• 1999

The experiment was conducted on five different kinds of fabrics dyed with loess. The sewability of fabrics dyed with loess by measuring the maximum needle piercing forces(MPF) through fabrics has been studied, MPF measurement using tensile tester was done 60 times for each fabrics at fixed low speed of 300mm/min. The nature of the loess on the dyed fabrics was physically jammed betweenthe fibers or adhered to the surface of fibers in the form of the fine particles so that the MPF through fabrics increases extremely in proportion to the increase of loess uptake and the plying number of fabrics dyed with loess. This results indicate that the MPF through fabrics is affected by mean value of the coefficient of friction on the surface of fabric(MIU) and cloth cover factor(Kc) in this experiment. Fabric was finished with softner to decrease the MPF during sewing operation, The MPF through softner finished fabric was decreased remarkably.