• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2319-2344
• /
• 2010

Accumulated deficits resulting from managing the Korean Railroad and debts from the construction of the KTX (Korea Train Express which is a high-speed rail system) have left the Korean Railroad faced with great troubles. Since it changed into a public corporation Korail on January 1st, 2005, the Korea Railroad has been making unceasing efforts to overcome the troubles and improve its management. However, even these efforts haven't worked in the face of the improved conditions of other transportation methods such as better networks of land roads and air ways. The Korea Railroad had its revenue from its railway transportation limited, and has tried to expand its business to non-transportational areas. In some metropolitan cities, the Korea Railroad made investments in real estate by constructing station buildings based on private money. Yet, in small and medium size cities, the Korea Railroad has little particular strategic projects for business development. Recently certain small and medium size regional cities began to plan on business developments for the ex-railway land, and some small towns have developed real estate on the ex-railway land. Nevertheless, there have been no systematic case studies to classify these real estate developments.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.7-19
• /
• 2006

Due to the continuous expansion of the highway, the opening of the high-speed railway(KTX), etc, the demands of domestic air transport decreasing. In the circumstances, airports and local governments are spending themselves in taking a measure to activate local airports. In this aspect, this study seeks the smooth flow of human movement through the activation of Daegu International Airport by analyzing the present condition of Daegu International Airport in relation to the appearance of the high-speed railway, deducing plans for activating airports, and presenting the roadmaps for long-, mid- and short-term roles for the development of Daegu Airport, and Presents substantial fulfilling plans to secure the competitive power of Daegu International Airport by speeding up the flow of air goods of the area for the long run. It is suggested in the study that by setting up an organization exclusively responsible for activating Daegu International Airport in the city of Daegu, supporting local travel agencies to promote consistent demands, supporting aviation companies to employ Daegu International Airport as a major air base, establishing airlines with priority for airports that open newly in local cities of Japan and establishing and expanding airlines in China areas be promoted actively. Ministry of Construction & Transportation makes it a means of main airport Policy to only support Incheon International Airport to be a hub. However not only Incheon International Airport should be an amok representing the country, but also the wide Metropolitan area should supply the demands, and airports based in the West and East Coast areas need to be developed in the future. It is suggested that since air demands of domestic local airports are based on the demands of the of gin destination in neighboring region, multiple bases need to be developed. It is suggested that by developing not 1 in mega hub (Incheon International Airport) but 1 in mega hub. 2 in regional hub (the West and East Coast) and Jeju foy the tourism hub in our developing airports system.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.672-684
• /
• 2016

UIC Codes 714R & 715R recommend the use of line classifications and their usage in maintenance work by employing notional traffic loads. However, the classification has not been applied to local lines and, therefore, a new line classification system based on UIC 714R has been proposed in this study. For this, various classification models of UIC, Germany, and UK have been studied first and equivalent traffic loads based on Korail's report, as well as on train timetables, have been derived. The results of the classifications have been compared with those of major European countries and it has been shown that the proposed classification is equivalent to the average value in the European cases. The line classification can be fully utilized during the decision making process of maintenance work and will also be used to model the Reliability Centered Maintenance (RCM) in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1621-1627
• /
• 2013

This paper compares power losses between voltage controlled before and after using power conversion device in AC feeding system. For this purpose we present voltage control procedures and criteria and model high speed line and train using PSCAD/EMTDC to compare power losses in various feeding condition. Power losses of the simulation result in power control before and after in single point feeding system was reduced maximum 0.37 MW(23.8 %) and average 0.23 MW(20.5 %) when one vehicle load operates maximum load condition. When three vehicles operate maximum load condition in one feeder section, power losses after voltage control was reduced 1.03 MW(49.5%) compared to before voltage control. And, power loss of parallel feeding system is reduced the average 0.08 MW(7.2 %) compared to the single feeding system. In conclusion, adaptive voltage control method using power conversion device can reduce power losses compared with existing method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2311-2317
• /
• 2011

In this paper, we study the temperature change of a ${\mu}$-bolometer focal plane array with a capacitive transimpedance amplifier bias cancellation circuit. Thermal analysis is essential to understand the performance of a ${\mu}$-bolometer focal plane array, and to improve the temperature stability of a focal plane array characteristics. In this study, the thermal analyses of a ${\mu}$-bolometer and its two reference detectors are carried out as a function of time. The analyses are done with the $30{\mu}m$ pitch $320{\times}240$ focal plane array operating of 60 Hz frame rate and having a columnwise readout. From the results, the temperature increase of a ${\mu}$-bolometer in FPA by an incident IR is estimated as $0.689^{\circ}C$, while the temperature increase by a pulsed bias as $7.1^{\circ}C$, which is about 10 times larger than by IR. The temperature increase of a reference detector by a train of bias pulses may be increased much higher than that of an active ${\mu}$-bolometer. The suppression of temperature increase in a reference bolometer can be done by increasing the thermal conductivity of the reference bolometer, in which the selection of thermal conductivity also determines the range of CTIA output voltage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.7 s.262
• /
• pp.756-763
• /
• 2007

The majority of catastrophic wheel failures are caused by surface opening fatigue cracks either in the wheel tread or wheel flange areas. The inclined cracks at railway wheel tread are initiated and the cracks are caused by wheel damage-spatting after 60,000 km running. Because the failured railway wheel is reprofiled before regular wheel reprofiling, the maintenance cost for the railway wheel is increased. Therefore, it is necessary to analyze the mechanism for initiation of crack. In the present paper, the combined effect on railway wheels of a periodically varying contact pressure and an intermittent thermal braking loading is investigated. To analyze damage cause for railway wheels, the measurements for replication of wheel surface and the effect of braking application in field test are carried out. The result shows that the damages in railway wheel tread are due to combination of thermal loading and ratcheting.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.118-126
• /
• 2011

The characteristics of the responses obtained in thermosonic tests are investigated in this study to improve the performance of a thermosonic test system. Thermosonic tests are conducted with an acoustic horn with high power capability to investigate the characteristics of the vibration produced in turbine blades with complex geometry. The influences of the excitation signal that is input to the horn and the coupling methods between a clamp and the acoustic horn on the characteristics of the vibration excited in a component are presented. As a result, an excitation method with a fast narrow band chirp test (sweep test) and a stud coupling is proposed as an excitation method for thermosonic testing. This method can be applied to different types of turbine blades and also to other components.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.12
• /
• pp.1084-1088
• /
• 2009

The measurement of dynamic stagger in electric railways is one of the key test parameters to increase speed and maintain safety in electric railways. This paper is introduces a non-contact optical-based measuring instrument of a catenary system in electric railways. The instrument is implemented by utilizing a CCD (Charge Coupled Device) camera installed on the roof of a vehicle for vision acquisition and image processing techniques including the Canny edge detector and the Hough transform to detect contact wires and calculate dynamic stagger. To check the validity of our approach for the intended application, we measured stagger of a overhead wire of a Korea Tilting Train (TTX). The non-contact optical-based measurement system proposed in this paper performs real-time stagger measurement of an activated high-voltage contact wire. By results of this paper, the instrument should be applied to assess performance and reliability of newly developed electric railway vehicles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.948-953
• /
• 2015

In this paper, we studied the environmental requirements for the railway transponder system. The transponder system is comprised of a reader installed beneath the train, a tag installed on the track, and a portable programmer. Among them, the transponder tag should be designed to withstand harsh environments, such as wide operating temperature range, mechanical shock and vibration, etc. To validate stable and reliable service under railway conditions, we carried out environmental test for transponder tag. We then installed the tags on the Honam high-speed test line.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.137-141
• /
• 2018

The voltage drop is important in electric railway for feeding a huge power of train on fixed feeding area. Nowadays it is tried to operate a high speed trains on conventional lines and there is problem on the voltage drop too. It is simulated on the conditions increased the turn ratio of trolley, installed autotransformer neutral line with variable taps. In result, it is compensated the voltage drop between ATs and better on last AT, not on the position of AT. And it is decreased a return current and neutral current of AT because of unbalance between trolley and feeder. It should be studied faster and more controllable the solid state switchs instead of the mechanical one in order to utilize this system.