• 한국공간구조학회논문집
• /
• 제9권1호
• /
• pp.69-78
• /
• 2009

최근의 근단층지반운동인 Northridge 지진(1994, 미국), Kobe 지진(1995, 일본), Izmit 지진(1990, 터키)은 큰 수직성분의 영향으로 건축물 및 교량에 심각한 손상을 주었다. 일반적인 건축구조물의 내진설계에서 지진하중의 수직성분을 고려하여 설계하는 경우는 드물다. 본 연구에서는 지진하중의 수직성분 영향의 고려 유무에 따른 예제구조물의 기둥부재의 축력의 변화와 부재 단부의 소성힌지회전각을 산정하여 시스템의 손상상태를 평가하여 보았다. 해석결과 축력의 증가는 기둥부재의 손상에 의한 전체 구조시스템의 story collapse mechanism의 가능성을 주게 되므로 근단층지반운동이 예상되는 부분에서는 지진하중의 수직성분에 대한 영향을 고려하여야할 것으로 판단된다.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.437-447
• /
• 2011

In this study, the lower limbs joints were analyzed for features based on the biomechanical characteristics of landing techniques according to height and landing on the ground type (flats and downhill). In order to achieve the objectives of the study, changes were analyzed in detail contents such as the height and form of the first landing on the ground at different angles of joints, torso and legs, torso and legs of the difference in the range of angular motion of the joint, the maximum angular difference between joints, the lower limbs joints difference between the maximum moment and the difference between COM changes. The subjects in this study do not last six months did not experience joint injuries 10 males in 20 aged were tested. Experimental tools to analyze were the recording and video equipment. Samsung's SCH-650A model camera was used six units, and the 2 GRF-based AMTI were used BP400800 model. 6-unit-camera synchronized with LED (photo cell) and Line Lock system were used. the output from the camera and the ground reaction force based on the data to synchronize A/D Syc. box was used. To calculate the coordinates of three-dimensional space, $1m{\times}3m{\times}2m$ (X, Y, Z axis) to the size of the control points attached to the framework of 36 markers were used, and 29 where the body was taken by attaching a marker to the surface. Two kinds of land condition, 40cm and 60cm in height, and ground conditions in the form of two kinds of flat and downhill slopes ($10^{\circ}$) of the landing operation was performed and each subject's 3 mean two-way RM ANOVA in SPSS 18.0 was used and this time, all the significant level was set at a=.05. Consequently, analyzing the landing technique as land form and land on the ground, the changes of external environmental factors, and the lower limbs joints' function in the evaluation were significantly different from the slopes. Landing of the slop plane were more load on the joints than landing of plane. Especially, knee extensor moment compared to the two kinds of landing, slopes plane were approximately two times higher than flat plane, and it was statistical significance. Most of all not so much range of motion and angular velocity of the shock to reduce stress was important. In the further research, front landing as well as various direction of motion of kinetic, kinetic factors and EMG variables on lower limbs joints of the study in terms of injury-prevention-approach is going to be needed.

• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.135-145
• /
• 2019

비탈면 붕괴는 크게 내적요인과 외적요인으로 분류할 수 있다. 내적요인은 토층 깊이, 사면경사, 흙의 전단강도 등의 기존에 비탈면의 형성과 함께 내재 되어있는 공학적 요인이며, 외적요인은 지진과 같은 하중이다. 이때 최대가속도(PGA), 최대속도(PGV), Arias계수(I), 고유주기(T_p), 스펙트럼 가속도(S_aT=1.0) 등은 지진의 외적요인으로 대변되는 값이다. 특히, 최대지반가속도(peak ground acceleration, PGA)는 지진의 지반 운동 크기를 정의하는 가장 대표적인 값이지만 동일한 최대 지반가속도 값을 가지는 진동이라도 지진의 지속시간에 따라 달라지는 사면에서의 변위를 충분히 고려하지 못하는 단점을 가지고 있다. 본 연구에서는 인공사면을 대상으로 2차원 평면변형률 조건의 수치해석을 수행하였으며, 다양한 지진 시나리오의 PGA를 0.2g로 스케일링하여 적용했을 때 비탈면에서 발생하는 응답특성을 분석하였다. 분석 결과, 비탈면의 상층부와 하층부의 응답은 활동면 발생 여부에 따라 차이를 보이며, 입력 지진파의 외적요인 보다는 소성변형을 유발시킨 진동 특성의 영향을 받는 것으로 나타났다.

• 지질공학
• /
• 제25권2호
• /
• pp.201-213
• /
• 2015

지진지반운동 증폭을 야기하는 부지효과는 지하 토사 조건과 구조뿐만 아니라 지표 지형에 의해 지대한 영향을 받는다. 그럼에도 불구하고 국내에서는 최근 수십 년에 걸쳐 주로 지질 및 토사 조건과 관련된 부지고유 지진응답 연구들이 대부분을 차지해 왔으며, 이러한 국부 지질 효과는 잘 정립되어 현행 국내 내진설계기준들에 반영되고 있다. 이 연구에서는 현행 국내 내진설계기준에서는 고려되고 있지 않은 지표 지형효과 평가의 일환으로, 세 가지 다른 경사각 조건의 유한요소 지반 모델링을 통한 이차원 지진 부지응답 해석을 수행하였다. 이차원 유한요소 해석 결과인 최대 지반가속도와 가속도 응답스펙트럼을 추가적으로 수행한 일차원 유한요소 해석 결과와 비교하였다. 최대 지반가속도와 스펙트럴가속도는 대부분의 사면상부 영역에서 지형효과로 인해 이차원이 일차원 해석에 비해 크게 나타났다.

• 한국지진공학회논문집
• /
• 제3권4호
• /
• pp.1-10
• /
• 1999

지진 시 지반의 자유장 운동은 국지적 지반조건에 의하여 크게 영향을 받으며 내진설계에 앞서 지반조건을 고려한 부지응답특성평가를 수행하여야 한다. 본 논문은 부지고유의 지반거동 평가를 위하여 필요한 절차를 국내 내진기준과 외국의 기술현황 조사를 바탕으로 제안하였다. 부지응답특성 평가의 개요를 설명하고 1차원 등가선형 해석에 필요한 지반자료 획득을 위한 지반조사계획 기반조사기법, 저변형율 및 고변형율 영역에서의 지반의 변형거동특성, 현장 및 실내시험결과를 이용한 부지특성평가방법들을 제안하였다 또한 제안된 절차를 따라 수행된 인천 지역의 부지특성평가방법들을 제안하였다 또한 제안된 절차를 따라 수행된 인천 지역의 부지응답특성평가 예를 포함하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.653-654
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.381-382
• /
• 2011

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• 대한물리의학회지
• /
• 제13권3호
• /
• pp.113-120
• /
• 2018

PURPOSE: This study was conducted to investigate the characteristics of a specific functional shoe in terms of the range of motion (ROM) of ankle and foot joints during walking when compared to a standardized shoe. METHODS: Kinematic ROM data pertaining to ankle, tarsometatarsal, and metatarsophalangeal joints were collected from twenty-six healthy individuals during walking using a ten-camera motion analysis system. Kinematic ROM of each joint in three planes was obtained over ten walking trials consisting of two different shoe conditions. Visual3D motion analysis was finally used to coordinate the kinematic data. All kinematic ROM data were interpolated using a cubic spline algorithm and low-pass filtered with a cutoff frequency of 6 Hz for smoothing. RESULTS: The overall ROM of the ankle joint in the sagittal and coronal planes when wearing the specific functional shoe was significantly decreased in both ankles during walking when compared to wearing a standard shoe (p<.05). Significantly more flexibility was observed when wearing the specific functional shoe in the tarsometatarsal and metatarsophalangeal joints compared to a standard shoe (p<.05). CONCLUSION: Although clinical application of the specific functional shoe has shown clear positive effects on knee and ankle moments, the results of this study provide important background information regarding the kinematic mechanisms of these effects.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.13-20
• /
• 2006

A platform diving with categorizing 624C motion was video taped and 3D kinematic variables were analyzed. This motion is consist of 3 parts from the headstand position to the act of turning after take-off. The results indicated that it took a very short time from the moment of take-off to the act of 1/2 turning because the turning motion has already started from preparing motion even before the fingertips have parted from the ground. Also, there was barely any jumping height due to the use of upper limbs segment and there was little difference in the moving distance compared to the standing events judging from horizontal movement of 1.1m. The horizontal velocity of the center of human body was increased before take-off while the vertical velocity was decreased right after take-off and the velocity of lower limbs segment was faster than the upper limbs segment showing contrary results to the standing events. In the aspects of angular velocity, the upper limbs segment starts the turning motion when take-off by rapidly extending its angular velocity while lower limbs segment make large angular velocity even before take-off.