• 한국표면공학회지
• /
• 제29권5호
• /
• pp.512-518
• /
• 1996

Amorphous carbon nitride (a-C:N) multilayerfilms are formed by using altermating conditions during film deposition in are ion plating process. Because hard a-C:N films prepared with suitable megative bias voltages have large compressive stress, it is difficult to increase film thickness more than 200nm. Preparing multilayer films composed of hard layers and soft layers, we can grow thick multilayer films on Si and SKH steel substrate. The total thickness of multilayer films is more than 1$\mu\textrm{m}$. The multilayer films are several times thicker than the single layer films and almost equal in hardness and internal stress to the single layer ones. X-ray photoelectron spectroscopy(XPS) and Raman spectroscopy reveal that multilayer films equal to single layer films in structure, which is similar to the structure of DLC films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.493-496
• /
• 1997

We have made disperse diazo black D(DB-D) ultrathin films using Langmur-Blodgett(LB) and vacuum-evaporation technique. Physical and electrical properties of the films were investigated. Solution was made with a concentration of 10$^{-3}$ mol/$\ell$ using chloroform. Moving wall apparatus (NL-LB140 S-MWC) was employed to make the LB films. X,Y and Z-type LB films were manufactured and studied by UV/visible absorbance spectra and morphology of surface using atomic force microscopy. Vacuum-evaporated DB-D think films were made at a pressure of 10$^{-5}$ torrr. The absorption peaks appear at 200 and 40nm in the LB films and vacuum-deposited films. And we have studied photoluminescence spectrum of the DB-D films. Also TGA and DSC properties of the DB-D have been observed and current -voltage characteristics of the DB-D LB films have been measured along the perpendicular direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1067-1070
• /
• 2008

DuPont Teijin FilmsTM have developed engineered substrates for flexible electronics. Teonex(R) Q65 and Melinex(R) ST506/5004 are biaxially oriented semi-crystalline polyesters. Smooth planarised Teonex(R) Q65 and Melinex(R) ST506/504 emerge as suitable substrate materials for display backplanes and frontplanes. This contribution discusses the impact of applying a planariser coating to these films. Also, the effect of a more controlled finishing process treatment upon film shrinkage and CLTE is presented.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.71-75
• /
• 2004

The technology of $C_{60}$ fullerite films preparation by means of gas-phase deposition and structure of fullerite films are described. A three-channel flow plant was used to obtain fullerite films. The films were deposited in the flow of inert gas under reduced pressure onto a cooled silicon or sapphire substrate placed inside the reaction chamber of the plant. The plant allows one to obtain the films of pure fullerenes and to synthesise the films from fullerene compounds and doped fullerenes. The structure of two types of films were investigated by FE-SEM and SEM techniques: pure fullerite films onto silicon and sapphire substrates as well as compound films were studied by FE-SEM technique. All samples have shown columnar structure with high level of porosity. The synthesis of films composed of fullerene and its compounds for use in electronics is demonstrated to be promising. For example, experiments confirm the possibility to use fullerite films in sensor electronics to produce humidity and thermal sensors. It is also possible to use the sensitivity of these films to isotropic pressure. The experiments with $C_{60}$-Cu-J films have shown quite strong dependence of their resistance on pressure of different sort of medium-gas that could be used in gas-sensitive sensors. The structure and preparation technology of resistive sensor based on fullerite films are described.bed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권1호
• /
• pp.1-7
• /
• 2005

Thin films of vanadium oxide(VO/sub x/) were deposited by r.f. magnetron sputtering from V₂O/sub 5/ target with oxygen/(oxygen+argon) partial pressure ratio of 0% and 8% and in situ annealed in vacuum at 400℃ for 1h and 4h. Crystal structure, chemical composition, molecular structure, optical and electrical properties of films were characterized through XRD, XPS, RBS, FTIR, optical absorption and electrical conductivity measurements. The films as-deposited are amorphous, but 0%O₂ films annealed for time longer than 4h and 8% O₂ films annealed for time longer than 1h are polycrystalline. As the oxygen partial pressure is increased the films become more stoichiometric V₂O/sub 5/. When annealed at 400℃, the as-deposited films are reduced to a lower oxide. The optical transmission of the films annealed in vacuum decreases considerably than the as-deposited films and the optical absorption of all the films increases rapidly at wavelength shorter than about 550nm. Electrical conductivity and thermal activation energy are increased with increasing the annealing time and with decreasing the oxygen partial pressure.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.567-571
• /
• 2009

Polycrystalline ZnO and Ga doped ZnO (GZO) films are deposited on glass substrate by RF magnetron sputtering at room temperature. The characteristics of ZnO and GZO films are investigated with X-ray diffraction measurement, UV-VIS-NIR spectrophotometer $(250{\sim}1200nm)$ and hall measurement. The post-growth thermal treatment of these films is carried out in N2 ambient at $500^{\circ}C$ for 30 min and an hour. ZnO and GZO films have different changing behavior of structural and optical properties by annealing. To use transparent conductive films for solar cell, films should have not only high transmittance but also good electrical property. Although as deposited GZO films have electrical properties than ZnO films, GZO films have not good transmittance properties. Consequently, we succeed that the high transmittance of GZO films is improved by annealing process.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.408-413
• /
• 2016

The dielectric thin films applied to multi-colored semitransparent thin film solar cells have been extensively studied. In this work, we prepared GeSbTe and GeTe chalcogenide thin films using magnetron sputtering, and investigated their optical and phase-change properties to replace the dielectric films. The changes of surface morphology, sheet resistance, and X-ray diffraction of the Te-based chalcogenide films support the fact that the amorphous stability of GeTe films is superior to that of GeSbTe films. While both amorphous GeSbTe and GeTe films thinner than 30 nm have optical transparency between 5% and 60%, GeTe films transmit more visible light than GeSbTe films. It is confirmed by computer simulation that the color of semitransparent silicon thin film solar cells can be adjusted with the addition of GeSbTe or GeTe films. Since it is possible to adjust the contrast of the solar cells by exploiting the phase-change property, the two kinds of chalcogenide films are anticipated to be used as an optical layer in semitransparent solar cells.

• 센서학회지
• /
• 제16권4호
• /
• pp.307-312
• /
• 2007

The films of Er-doped ZnO (ZnO:Er) were prepared onto MgO wafers by ultrasonic spray pyrolysis at $550^{\circ}C$. The concentration of Er in the deposition source varied from 0.5 wt% to 3.0 wt%. The crystallographic properties and surface morphologies of the films were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The properties of photoluminescence (PL) for the films were investigated by dependence of PL spectra on the Er concentration in the films. The films were grown as polycrystalline with a dominant direction of [002]. The grain size of the films were reduced by Er-doping. Er-doping enhanced the ultraviolet emission of ZnO:Er films. The ZnO:Er films prepared with the deposition source of 2.0 wt% Er showed the strongest ultraviolet light emission peak among the films in this study.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.181-185
• /
• 2007

We report on our material and process research on ZnO:Al films and on our investigations on wet chemical etching using a variety of etching solutions. We achieve resistivity as low as $750{\mu}{\Omega}cm$ for ZnO:Al films with film thickness of 140 nm. Etching with phosphorous acid allows for accurate fine patterning of the ZnO:Al films on glass substrates.

• 한국조경학회지
• /
• 제34권1호
• /
• pp.69-80
• /
• 2006

The purposes of this study are to analyze the meanings of urban spaces which are the background of the Korean films, and to capture the interactions of ordinary culture and urban spaces. By reading urban spaces through films, it is possible to understand the variety of experiences that are hardly captured with direct eyes, specific and vivid urban images, and various events formed by the interactions of spaces and people. The scope of the study is the urban spaces revealed in Korean films portraying cities after the 1960's as their settings, and the total of 18 films was selected with every $4{\sim}5$ films for each time stage. With the selected films, analytical meanings were developed with considering three aspects; 1) phylogenetic meaning that simply reflects social-cultural and historical background, 2) the outer strum meaning that concerns the situation of special background and film scene, and 3) metaphorical and metanymic meaning on films. According to the appearance frequency, spatial backgrounds of film scenes are mainly alleys, main streets, railroad, loft, and riverside. And then the connection between spaces and meaning clusters was grasped, and reflected meanings were derived for every spaces. And the meaning of urban space in films was analyzed based on the meaning of developments and outer stratum. The fundamental characteristics and feelings of people in media such as films are more emphasized than in real world. Urban space is not considered as a simple visible shell, but is recognized as 'a real situation' created by people. The intension of this study was to open the possibility of the various views of urban spaces. The construction of the urban space should be approached from a perspective of creating new places at where the space and human beings interact with considerations of stories of various human lives. I hope new vistas can be opened up for the research subjects and methodologies about the hereafter study of urban spaces through the mutual communications with various adjacent regions including films.