• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.929-938
• /
• 2011

The setting algorithm of cloaking region using dummy which is proposed in this paper solves the problem which counts the building with duplication that exists in several cells of Privacy Grid by adding the building grouping item to the index structure of the existing Privacy Grid, and by increasing K value after searching the contiguous cells in the comer of each building, the exposure problem of private location information due to the minimum cloaking region setting of the existing GBC is solved. In addition, this paper reduces the searching time of K value by setting smaller cloaking region than Privacy Grid and GBC with dummy K before expanding cloaking region and strengthens the location information protection of users using dummy K.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.8
• /
• pp.450-456
• /
• 2003

This paper proposes a multiple time-series model with dummy variables for one-hour ahead load forecasting. We used 11 dummy variables that were classified by day characteristics such as day of the week, holiday, and special holiday. Also, model specification and selection of input variables including dummy variables were made by test statistics such as AIC(Akaike Information Criterion) and t-test statistics of each coefficient. OLS (Ordinary Least Squares) method was used for estimation and forecasting. We found out that model specifications for each hour are not identical usually at 30％ of optimal significance level, and dummy variables reduce the forecasting error if they are classified properly. The proposed model has much more accurate estimates in forecasting with less MAPE (Mean Absolute Percentage Error).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.379-386
• /
• 2004

OFDM(orthogonal frequency division multiplexing) communications system is very attractive for the high data rate transmissionin the frequency selective fading channel. Since OFDM has high PAPR(peak-to-average power ratio), OFDM signal may be distorted by the nonlinear HPA(high power amplifier). In this paper, we propose an improved dummy sequence scheme for reducing the PAPR in OFDM communication system. This method inserts each different dummy sequence at the predefined sub-carriers fur PAPR reduction. After IFFT, the OFDM data signal with the lowest PAPR is selected to transmit. The complementary sequence is used as dummy sequence. So, it can cut down the computation time and quantity because it dose not require the peak value optimization for finding the phase rotation factor and the transmission of the side information about the rotation factor unlike the PTS method.

• The Korean Journal of Applied Statistics
• /
• v.22 no.2
• /
• pp.435-442
• /
• 2009

Multiple genes interacting is a difficult due to the limitations of parametric statistical method like as logistic regression for detection of gene effects that are dependent solely on interactions with other genes and with environmental exposures. Multifactor dimensionality reduction(MDR) statistical method by dummy variables was applied to identify interaction effects of single nucleotide polymorphisms(SNPs) responsible for longissimus mulcle dorsi area(LMA), carcass cold weight(CWT) and average daily gain(ADG) in a Hanwoo beef cattle population.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.731-738
• /
• 2012

A new fluorescent dummy load to replace one of the fluorescent lamps in a dual lamp type rapid-start ballast for halving the lamp power is proposed. Using a circuit composed of a fundamental compensation circuit and a harmonic filter circuit, a new fluorescent dummy load having superior characteristics than a conventional dummy load is developed. The design principle and architecture of the proposed fluorescent dummy load is explained and verified by experiments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.280-283
• /
• 2011

This study investigates the durability of car body and the safety of passenger inside car body in the case of the impact contact at passenger and car body. In case of front impact contact, maximum von Mises equivalent stress and principal stress become 3240.7MPa and 1634MPa respectively at the rear part of car body and the neck of dummy. And maximum total deformation occurred with 14.145mm at the hand of dummy. In case of side impact contact, maximum von Mises equivalent stress and principal stress become 7687.9MPa and 1690.7MPa respectively at the front part of car body and the lap of dummy. And maximum total deformation occurred with 16.414 mm at the foot of dummy. In case of rear impact contact, maximum von Mises equivalent stress and principal stress become 2366.6MPa and 1447MPa respectively at the front part of car body and the neck of dummy. And maximum total deformation occurred with 7.548mm at the rear part of car body. As the maximum von-Mises stress at side impact is shown with more than 700MPa as over two times at front or rear impact the danger of car body is increased. The great possibility of damage is shown at neck and hand of dummy with more than total displacement of 10mm.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.623-630
• /
• 2006

The purpose of this study is to do research hairdressers' knowledge of hairless head dummy's brand name, and to suggest and develop various hairless head dummy for the students who are learning hair styling in the colleges and the academies, for the hairdressers working in the beauty salons. Using only one and same kind of hairless head model is not appropriate for hairdressers and students being trained hair styling skill, because people have a variety of head shapes. Three hundred twenty nine persons who live in Iksan area are selected as subjects. The results of the study are as follow: by the analysis of subjects' knowledge of hairless head dummy's brand name, most of them didn't know it exactly. This study deduced that there is a significant relation between the utility of hairless head dummy and subjects' intention of purchasing the dummy. To put it in detail, in case of college students, there is little significant difference between them. But in case of academy students, there is. By the regression analysis, especially, in case of hairdressers working in beauty salons and academy students, four conditions did significantly matter in their purchasing the dummy: first, whether the respondents owns it, second, whether it is helpful to themselves, third, whether they have ever used foreign products and, finally, whether they have intention to purchase various hairless head dummys or not. In conclusion, it depended on each group position whether their knowledge of brand names of hairless head model affects their purchase of the dummy or not.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.485-488
• /
• 2007

최근 Analog Sampled-Data 신호처리를 위하여 주목되고 있는 SI(Switched-Current) circuit은 저전력 동작을 하는 장점이 있지만, 반면에 SI circuit에서의 기본 회로인 Current Memory는 Charge Injection에 의한 Clock Feedthrough이라는 치명적인 단점을 갖고 있다. 따라서 본 논문에서는 Current Memory의 문제점인 Clock Feedthrough의 일반적인 해결방안으로 Dummy Switch의 연결을 검토하였고, Austria Mikro Systeme(AMS)에서 $0.35{\mu}m$ CMOS process BSIM3 Model로 제작하기 위하여 Current Memory의 Switch MOS와 Dummy Switch MOS의 적절한 Width을 정의하여야 하므로, 그 값을 도출하였다. Simulation 결과, Switch의 Width는 $2{\mu}m$, Dummy Switch의 Width는 $2.35{\mu}m$로 정의될 수 있음을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.932-936
• /
• 2002

This paper has been studied a calibration techniques in CISPR A for 1 m monopole antenna factor in the frequency range below 30 MHz. The equivalent capacitance substitution method uses a dummy antenna in place of the actual rod element. Dummy antenna measure frequency from 150 kHz to 30 MHz and good results factor from 150 kHz to 25 MHz compare to using 1 m monopole antenna factor. It will be use to substitute dummy antenna factor for 1 m monopole antenna factor.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.107-117
• /
• 1992

This paper presents an improved algorithm of optimal measurement design with a reliability evaluation method for a large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.