• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.8-15
• /
• 2003

본 연구에서는 국내산 소경재의 보다 효율적인 이용을 위하여 PEG처리한 활엽수재의 환공재 4수종(신갈나무, 굴참나무, 물푸레나무, 오동나무)과 산공재 4수종(산벚나무, 물박달나무, 층층나무, 은사시나무)에 대한 치수안정성을 평가하였다. 수축률은 공시수종 모두 PEG처리에 의해 감소하는 효과가 있었고, 산공재가 환공재보다 낮았다. 중량증가율은 PEG농도의 증가에 따라 증가되었고, 산공재가 환공재 보다 다소 높은 증가율을 보여주었다. 벌킹효과는 PEG농도의 증가에 따라 증가하였지만, 분자량이 클수록 감소하였고, 산공재가 환공재보다 벌킹효과가 높게 나타났다. 결론적으로, 산공재가 환공재보다 높은 치수안정성을 보여주었다. 따라서 PEG처리재의 치수안정효과는 목재의 구조(도관의 분포상태 및 타이로시스 존재유무)와 밀도에 크게 영향받는 것으로 생각되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.1-10
• /
• 1996

The frequency distribution diagrams of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens in relation to habit and phenology were analyzed. As the habit character changes from shrub to tree, such quantitative features as vessel frequency, percentage of solitary vessels, length/diameter(L/D) ratio of vessel element decreased but tangential vessel diameter, fiber length/vessel element length(F/V) ratio increased. Qualitative features such as helical vessel wall thickening, diffuse distribution of longitudinal parenchyma, heterogeneous ray composition decreased, while alternate intervessel pits, libriform wood fiber, simple perforations increase. As the phenology character changes from evergreen to deciduous species, such quantitative features as percentage of solitary vessels, vessel element length and L/D ratio decreased but tangential vessel diameter, F/V ratio increased. Diffuse distribution of longitudinal parenchyma, heterogeneous ray composition, and crystals in qualitative features decreased, while alternate intervessel pits, libriform wood fiber, simple perforation of vessel element, ray width and ray height increased.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.1-13
• /
• 1987

This study was carried out to investigate the variations of dimension and exterior shape of vessel elements, morphology of spiral thickening and ray-vessel pit in korean diffuse-porous woods (56 species, 18 families), The tangential pore diameter and vessel element length was increased, whereas the pore number per unit area($1mm^2$) was decreased from pith outwards. The tangential pore diameter was decreased but the length of vessel element was not changed from earlywood to latewood within an annual ring. However, the dimensional variations of vessel element was not able to be recognized among relative positions in peripheral variation. The exterior shape of vessel element could be classified into four types; Type 1 is without tail, Type 2 with ligulate tail, Type 3 with broad taper tail and Type 4 with the very short length between perforations. The distribution frequency of Type 2 and 3 was relatively high in comparision with the others. According to the prominence, distribution position and branched shape, the spiral thickenings could be divided into five types. The spiral thickenings occurred 52% in the species observed. Thus it was doubtful to consider the simple presence of spiral thickening as diagnostic index in diffuse-porous woods. The morphology of ray-vessel pit could be grouped as reticulate, scalariform, oval, linear and coalescent type. Most of species examined showed oval and linear type.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.29-37
• /
• 1998

An image analysis program with the function of measuring various quantitative characteristics in the transverse surface of wood was developed using Delphi 2.0. Data on pore characteristics (conditions for image processing, proportion of pores in relationship to other elements, tangential diameter, area, tangential and radial diameter, x and y coordinates of pore center, and geometric coefficients) were saved in text file format. In addition, the pore area histogram in the tangential and radial directions was saved as a BMP (bitmap) type file. Analyses indicated that quantitative characteristics such as the relative radial distribution of pores in a growth ring, pore tangential area histogram, and proportion of pore in lumen area appear to be useful in separating four diffuse-porous woods and four ring-porous woods on the species level.

• Journal of Forest and Environmental Science
• /
• 제14권1호
• /
• pp.1-13
• /
• 1998

주요 침 활엽수재에 대하여 methyl methacrylate를 이용하여 만든 목재-polymer복합체에 대하여 polymer의 분포와 존재상태등을 목재의 조직학적인 면에서 조사하였으며 그것을 요약하면 다음과 같다. 1. polymer의 침투성은 수종에 따라 다르며 수종고유의 특성에 따라 다르다. 낙엽송은 침투성이 대단히 나쁘며 활엽수재에 있어서는 환공재가 산공재보다 침투성이 양호 하였다. 2. 횡단면에서 침투성이 가장 양호하며 방사단면과 접선단면에서의 주입은 저하되고 양자의 차이는 거의 없었다. 3. 동일 수종에서는 변재가 섬재보다 침투성이 양호 하였다. 수종에 따라 변심재간에 침투성이 다른 것은 심재화에 의한 tyloses의 형성 또는 도관중의 침착물에 의한 것으로 생각되고 있다. 4. 환공성 수종에서는 조재부가 만재부보다 polymer의 침투성이 양호 하였으며 산공재에서는 반대로 만재부가 조재부보다 침투성이 양호하였다. 5. 도관의 크기와 침투성과의 사이에는 명확한 상관이 없는 것으로 생각된다. 도관의 직경이외에도 도관의 비율, tyloses의 발달, 내용물의 충진 혹은 천공판등이 관계하는 것으로 생각되고 있다. 6. 침엽수재 방사조직에 있어서는 방사유세포보다 방사가도관의 침투성이 양호하였으며 활엽수재의 방사조직은 구성비율이 높음에도 불구하고 단량체의 방사방향에 미치는 영향은 침엽수재보다 적었다. 7. 비중과 연륜폭은 모두 polymer의 침투성과 거의 관계가 없었다.

• Journal of Plant Biology
• /
• 제27권2호
• /
• pp.81-94
• /
• 1984

Anatomical features and cell dimensions of the secondary xylem in the stem of the korean Lauraceas including 6 genera and 12 species were investigated under a light microscope and scanning electron microscope. Key to identification among genera or species was made from the anatomical features and systematic correlation investigated. The stem woods of Lauraceae exhibit the following characters: (1) quite evenly distributed pores (diffuse-porous wood) (2) perforation plates simple or occasionally scalariform in the latewood vessels (3) almostly 2-seriate and heterocellular rays (4) abundant paratracheal-vasicentric parenchyma (5) oil cells. Especially, the appearance of simple perforation plates suggest the Lauraceae to be more or less advanced. It is considered that the series of specialization in the Lauraceae from the perforation plates and the height of rays is as LinderalongrightarrowNeolitsealongrightarrow(Machilus, Litsea, Iozoste)longrightarrowCinnamomum, and Lindera sericea is the most pribitive in the Lauraceae.

• Journal of the Korean Wood Science and Technology
• /
• 제17권1호
• /
• pp.55-68
• /
• 1989

This experiment was carried out to investigate the crack of coated Nitrocellulose Lacquer on flatand edge-grained boards of Quercus acutissima, ring-porous wood, and Betula platyphylla var. japonica, diffuse-porous wood, by variations of moisture contents at 7, 13 and 21%. Cold check system was used as an accelerating method for crack development, in which one cycle of the system consisted of 10 replications of each unit cycle, $60^{\circ}C$ for 4hr followdd by $-20^{\circ}C$ for 4hr. The analysis of Nitrocellulose Lacquer characteristics was made by means of water permeation measurement, F.T.I.R. spectroscopy, N.M.R. spectroscopy, gel permeation chromatography, gas chromatography, and D.S.C. The results obtained were as follows: 1. The number of cracks increased with the increasing moisture content of board. 2. The crack of coated film on flat-grained board was fewer in number than on edge-grained board. 3. The crack occurred in Quercus acutissima was more numerous on edge-grained board but less frequent on flat-grained board compared with that in Betula platyphylla var. japonica, respectively. 4. The cold crack vertically developed to the grain both in Quercus acutissima and Betula platyphylla var. japonica. 5. Water permeability in intermediate coated film was lower than in under and top coated film, but the difference was not confirmed between under and top coated film.

• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.26-52
• /
• 1987

우리나라에 분포도(分布度)가 높은 산공재(散孔材) 중에서 구조용재(構造用材)로서 뿐만 아니라 각종 특수용재(特殊用材)로서 이용도(利用度)가 높은 자작나무과(科) 3속(屬) 7수종(樹種)을 비롯한 6속(屬) 10수종(樹種)의 주요(主要) 구성요소(構成要素)의 방사방향(放射方向)에 따른 변동(變動)을 조사(調査)하였던 바 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 주요(王要) 구성요소(構成要素)의 치수는 수에 가까운 부위(部位)에서 일정(一定) 년륜(年輪)까지 급격히 증가(增加)한 후 거의 안정(安定)되는 직선형(直線型)(Type I), 완만하게 계속 증가(增加)하는 곡선형(曲線型)(Type II) 및 서서히 감소(減少)하는 포물선형(抛物線形)(Type III)으로 구분(區分)되며 동일수종내(同一樹種內)에서도 요소별(要素別)로 서로 다른 형(型) 공존(共存)하였다. 2. 목섬유(木織維)길이의 변이형(變異型)과 크기는 Type I은 자작나무 $1.35{\pm}0.10mm$, 거제수나무 $1.20{\pm}0.13mm$, 박달나무 $1.03{\pm}0.10mm$, 서어나무 $1.18{\pm}0.37mm$, 오리나무 $1.06{\pm}0.01mm$, 산벚나무 $0.81{\pm}0.16mm$였고, Type II는 사스래나무 $1.34{\pm}0.19mm$, 물박달나무 $1.20{\pm}0.29mm$였으며 Type III은 감나무 $0.95{\pm}0.13mm$였다. 목섬유(木纖維)의 폭(幅)의 변이형(變異型)과 크기는 Type I은 서어나무 $18.7{\pm}1.8{\mu}m$, 오리나무 $18.5{\pm}1.1{\mu}m$, 고로쇠나무 $14.5{\pm}2.4{\mu}m$였고, Type II는 사스래나무 $19.3{\pm}1.4{\mu}m$, 박달나무 $17.5{\pm}1.9{\mu}m$, 산벚나무 $14.8{\pm}5.4{\mu}m$였으며, Type III은 자작나무 $19.1{\pm}1.1{\mu}m$, 물박달나무 $20.3{\pm}3.4{\mu}m$, 거제수나무 $18.6{\pm}2.8{\mu}m$, 감나무 $18.9{\pm}4.3{\mu}m$였다. 3. 도관요소(導管要素) 길이의 변이형(變異型)과 크기는 Type I이 자작나무 $0.62{\pm}0.02mm$, 사스래나무 $0.90{\pm}0.09mm$, 박달나무 $0.64{\pm}0.08mm$, 산벚나무 $0.43{\pm}0.05mm$, 고로쇠나무 $0.31{\pm}0.03mm$였고 Type II는 물박달나무 $0.72{\pm}0.22mm$, 오리나무 $0.63{\pm}0.01mm$, 감나무 $0.17{\pm}0.06mm$였으며, Type III은 거제수나무 $0.75{\pm}0.10mm$, 서어나무 $0.66{\pm}0.16mm$였다. 도관요소(導管要素) 방사방향(放射方向) 직경(直徑)의 변이형(變異型)과 크기는 Type I이 자작나무 $58.7{\pm}11.3{\mu}m$, 서어나무 $67.1{\pm}10.1{\mu}m$, 오리나무 $60.0{\pm}10.3{\mu}m$ 였고, Type II가 사스래나무 $100.7{\pm}10.7{\mu}m$, 거제수 나무 $108.9{\pm}16.6{\mu}m$, 박달나무 $79.1{\pm}17.3{\mu}m$, 산벚나무 $47.5{\pm}21.3{\mu}m$, 감나무 $141.2{\pm}59.5{\mu}m$였으며, Type III은 물박달나무 $115.0{\pm}17.4{\mu}m$, 고로쇠나무 $57.1{\pm}11.4{\mu}m$였다. 도관요소(導管要素) 접선방향(接線方向) 직경(直徑)이 변이형(變異型)과 크기는 Type I이 자작나무 $54.8{\pm}13.5{\mu}m$, 서어나무 $57.1{\pm}11.7{\mu}m$, 오리나무 $44.9{\pm}13.0{\mu}m$였고, Type II는 사스래나무 $76.5{\pm}16.9{\mu}m$, 거제수나무 $87.1{\pm}17.3{\mu}m$, 박달나무 $65.6{\pm}9.2{\mu}m$, 산벚나무 $44.9{\pm}13.0{\mu}m$, 고로쇠나무 $34.8{\pm}10.4{\mu}m$였으며, Type III은 물박달나무 $86.0{\pm}13.6{\mu}m$, 감나무 $129.3{\pm}34.5{\mu}m$였다. 단위면적당(單位面積當) 관공(管孔)의 분포(分布)는 자작나무 $54.4{\pm}3.5$개, 사스래나무 $23.0{\pm}2.8 $개, 물박달나무 $19.5{\pm}2.5$개, 거제수나무 $20.8{\pm}2.6$개 박달나무 $17.6{\pm}2.7$, 서어나무 $87.5{\pm}14.7$개, 오리나무 $79.9{\pm}11.6$개, 산벚나무 $223.1{\pm}33.2$개, 고로쇠나무 $40.6{\pm}2.4$개, 감나무 $6.6{\pm}1.5$개였다. 4. 계단상(階段狀) 천공판(穿孔板)을 갖는 수종(樹種)의 천공판(穿孔板) 길이의 변이형(變異型)과 크기는 Type I은 자작나무 $143.5{\pm}16.4{\mu}m$, 거제수나무 $139.6{\pm}16.6{\mu}m$, 오리나무 $123.3{\pm}20.6{\mu}m$였고, Type II는 사스래나무 $144.9{\pm}17.9{\mu}m$, 물박달나무 $140.4{\pm}23.4{\mu}m$였으며, Type III은 박달나무 $108.7{\pm}19.7{\mu}m$였다. 판공판상(穿孔板上) bar수(數)의 변이형(變異型)과 수(數)는 Type I은 거제수나무 13.8{\pm}2.3개, 박달나무 $11.6{\pm}2.3$개였고, Type II은 물박달나무 $15.l{\pm}6.2$개였으며, Type III은 자작나무 $16.6{\pm}8.3$개, 사스래나무 $10.1{\pm}1.7$개, 오리나무 $17.1{\pm}7.9$ 개였다. 5. 방사조직(放射組織) 높이의 변이형(變異型)과 크기는 Type I이 사스래나무 $187.3{\pm}46.5{\mu}m$, 거제수나무 $209.9{\pm}48.4{\mu}m$였고, Type II는 자작나무 346.3{\pm}, $83.4{\mu}m$, 서어나무 $297.0{\pm}87.0{\mu}m$, 오리나무 $387.3{\pm}84.7{\mu}m$, 고로쇠나무 $244.8{\pm}74.0{\mu}m$였으며, Type III은 물박달나무 $233.7{\pm}66.1{\mu}m$, 박달나무 $172.9{\pm}47.9{\mu}m$, 산벚나무 $361.8{\pm}88.8{\mu}m$, 감나무 $304.8{\pm}87.3{\mu}m$였다. 방사조직(放射組織) 폭(幅)의 변이형(變異型)과 크기는 Type I이 거제수나무 $25.5{\pm}5.3{\mu}m$, 서어나무 $44.9{\pm}16.1{\mu}m$, 오리나무 $27.3{\pm}8.3{\mu}m$였고, Type II는 자작나무 $29.8{\pm}6.3{\mu}m$, 사스래나무 $23.6{\pm}5.0{\mu}m$, 물박달나무 $33.3{\pm}8.9{\mu}m$, 박달나무 $21.9{\pm}9.3{\mu}m$, 산벚나무 $39.2{\pm}10.1{\mu}m$, 고로쇠나무 $35.2{\pm}8.9{\mu}m$였으며, Type III은 감나무 $44.2{\pm}7.6{\mu}m$였다. 6. 목섬유(木纖維), 도관요소(導管要素), 방사조직(放射組織)의 치수의 변동(變動)을 고려(考慮)하여 미성숙재(未成熟材)와 성숙재(成熟材)를 구분(區分)하면 자작나무 45년륜(年輪), 사스래나무 43년륜(年輪), 물박달나무 34년륜(年輪), 거제수나무 53년륜(年輪), 박달나무 38년륜(年輪), 서어나무 44년륜(年輪), 오리나무 31년륜(年輪), 산벚나무 24년륜(年輪), 고로쇠나무 47년륜(年輪), 감나무 30년륜(年輪)이었다.