• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.8-15
• /
• 2003

This study was carried out to investigate the dimensional stability of wood treated with PEG for better utilization of domestic small-diameter logs. Four species of ring- porous wood(Quercus mongolica F_ISCH, Quercus variabilis B_LUME, Fraxinus rhynchophylla H_ANCE, Paulownia coreana U_YEKI,) and four species of diffuse-porous wood(Prunus sargentii R_EHDER, Betula davurica P_ALL, Populus tomentiglandulosa T. L_EE, Cornus controversa H_EMSLEY) were used for this experiment. The shrinkage of wood decreased with increasing the concentration of PEG. The shrinkage of diffuse- porous woods was lower than that of ring-porous woods. The weight gain increased in proportional to the PEG concentration. Diffuse-porous woods showed a little higher weight gain than ring-porous woods. Bulking effect also increased with increasing the PEG concentration, but was in inverse proportional to the molecular weight of PEG. Diffuse-porous woods showed higher bulking effect than ring-porous woods. Consequently, diffuse-porous woods showed better dimensional stability than ring- porous woods. It was considered that dimensional stability was affected by characteristics of wood such as vessel and tylosis, and density.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.1-10
• /
• 1996

The frequency distribution diagrams of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens in relation to habit and phenology were analyzed. As the habit character changes from shrub to tree, such quantitative features as vessel frequency, percentage of solitary vessels, length/diameter(L/D) ratio of vessel element decreased but tangential vessel diameter, fiber length/vessel element length(F/V) ratio increased. Qualitative features such as helical vessel wall thickening, diffuse distribution of longitudinal parenchyma, heterogeneous ray composition decreased, while alternate intervessel pits, libriform wood fiber, simple perforations increase. As the phenology character changes from evergreen to deciduous species, such quantitative features as percentage of solitary vessels, vessel element length and L/D ratio decreased but tangential vessel diameter, F/V ratio increased. Diffuse distribution of longitudinal parenchyma, heterogeneous ray composition, and crystals in qualitative features decreased, while alternate intervessel pits, libriform wood fiber, simple perforation of vessel element, ray width and ray height increased.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.1-13
• /
• 1987

This study was carried out to investigate the variations of dimension and exterior shape of vessel elements, morphology of spiral thickening and ray-vessel pit in korean diffuse-porous woods (56 species, 18 families), The tangential pore diameter and vessel element length was increased, whereas the pore number per unit area($1mm^2$) was decreased from pith outwards. The tangential pore diameter was decreased but the length of vessel element was not changed from earlywood to latewood within an annual ring. However, the dimensional variations of vessel element was not able to be recognized among relative positions in peripheral variation. The exterior shape of vessel element could be classified into four types; Type 1 is without tail, Type 2 with ligulate tail, Type 3 with broad taper tail and Type 4 with the very short length between perforations. The distribution frequency of Type 2 and 3 was relatively high in comparision with the others. According to the prominence, distribution position and branched shape, the spiral thickenings could be divided into five types. The spiral thickenings occurred 52% in the species observed. Thus it was doubtful to consider the simple presence of spiral thickening as diagnostic index in diffuse-porous woods. The morphology of ray-vessel pit could be grouped as reticulate, scalariform, oval, linear and coalescent type. Most of species examined showed oval and linear type.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.2
• /
• pp.29-37
• /
• 1998

An image analysis program with the function of measuring various quantitative characteristics in the transverse surface of wood was developed using Delphi 2.0. Data on pore characteristics (conditions for image processing, proportion of pores in relationship to other elements, tangential diameter, area, tangential and radial diameter, x and y coordinates of pore center, and geometric coefficients) were saved in text file format. In addition, the pore area histogram in the tangential and radial directions was saved as a BMP (bitmap) type file. Analyses indicated that quantitative characteristics such as the relative radial distribution of pores in a growth ring, pore tangential area histogram, and proportion of pore in lumen area appear to be useful in separating four diffuse-porous woods and four ring-porous woods on the species level.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.1-13
• /
• 1998

In this paper, it has been discussed on the relation between the anatomical features of woods and the penetration of methyl methacrylate monomer system into major Korean tree species, especially the Pinus koraiensis, Larix leptolepis, Quercus mongolica and Tilia amurensis. 1. There was some differences in penetration of polymers among different tree species, but generally the penetration of ring porous woods seems to be larger than that of diffuse porous woods and it was very difficult to penetrate to Larix leptolepis, especially to the that of heart wood. 2. The penetration on transeverse surface was relatively easy but radial and tangential impregnation were somewhat hard and differences between them were negligible. 3. The penetration of sapwood was larger than that of heartwood and its differences varied according to the existence of tyloses or contents in vessel. 4. Generally the polymer penetration of earlywood was larger than that of latewood in ring porous woods, but on the contrary, penetration of earlywood was small than that of latewood on diffuse porous woods. 5. Vessel diameter of wood had nearly no relation to polymers penetration. This seems to come from the reason that effective vessel diameter varies with the existence of tyloses or contents in vessel. 6. The penetration of ray tracheids was larger than that of ray parenchyma cells in softwoods, but penetration of hardwood rays seems to be small in comparison with softwood ray parenchyma cells. 7. Specific gravity and annual ring width had no relation to the penetration of polymer.

• Journal of Plant Biology
• /
• v.27 no.2
• /
• pp.81-94
• /
• 1984

Anatomical features and cell dimensions of the secondary xylem in the stem of the korean Lauraceas including 6 genera and 12 species were investigated under a light microscope and scanning electron microscope. Key to identification among genera or species was made from the anatomical features and systematic correlation investigated. The stem woods of Lauraceae exhibit the following characters: (1) quite evenly distributed pores (diffuse-porous wood) (2) perforation plates simple or occasionally scalariform in the latewood vessels (3) almostly 2-seriate and heterocellular rays (4) abundant paratracheal-vasicentric parenchyma (5) oil cells. Especially, the appearance of simple perforation plates suggest the Lauraceae to be more or less advanced. It is considered that the series of specialization in the Lauraceae from the perforation plates and the height of rays is as LinderalongrightarrowNeolitsealongrightarrow(Machilus, Litsea, Iozoste)longrightarrowCinnamomum, and Lindera sericea is the most pribitive in the Lauraceae.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.55-68
• /
• 1989

This experiment was carried out to investigate the crack of coated Nitrocellulose Lacquer on flatand edge-grained boards of Quercus acutissima, ring-porous wood, and Betula platyphylla var. japonica, diffuse-porous wood, by variations of moisture contents at 7, 13 and 21%. Cold check system was used as an accelerating method for crack development, in which one cycle of the system consisted of 10 replications of each unit cycle, $60^{\circ}C$ for 4hr followdd by $-20^{\circ}C$ for 4hr. The analysis of Nitrocellulose Lacquer characteristics was made by means of water permeation measurement, F.T.I.R. spectroscopy, N.M.R. spectroscopy, gel permeation chromatography, gas chromatography, and D.S.C. The results obtained were as follows: 1. The number of cracks increased with the increasing moisture content of board. 2. The crack of coated film on flat-grained board was fewer in number than on edge-grained board. 3. The crack occurred in Quercus acutissima was more numerous on edge-grained board but less frequent on flat-grained board compared with that in Betula platyphylla var. japonica, respectively. 4. The cold crack vertically developed to the grain both in Quercus acutissima and Betula platyphylla var. japonica. 5. Water permeability in intermediate coated film was lower than in under and top coated film, but the difference was not confirmed between under and top coated film.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.26-52
• /
• 1987

Among the diffuse-porous woods which arc dominant in Korea and used as construction materials due to their wood quality, ten species of six genus involving seven species of three genus in Betulaceae were studied on the radial variation of structural demenb. The species studied were Betula platyphylla var. japonica, B. ermanii, B. davurica, B. scstata, B. schmidtii, Carpinus laxifora, Alnus japonica, Prunus sargentii. Acer mono and Diospyros kaki. Wood fiber, vessel elements and ray increased rapidly in size from pith to a certain annual ring. After then the radial variation in size of the main structural elements seemed to be divided into three types; levelled off curve pattern indicating constant size(type I), continuously increasing curve pattern showing ever increase in size (type II) and parabolic curve pattern showing the gradual decrease after the maximum (type III), but the variation types by structural dements were different even in the same species. Based on the results from this study, it appears to be reasonable to consider the stabilized age of wood fiber, vessel elements and ray rather than considering wood fiber length in distinguishing mature woods from juvenile woods.