• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.182-182
• /
• 2011

This paper dealt with a design guide of LED luminaire standard for naval vessels. Several standards such as Korean Industrial Standard (KS), Korea Defence Standard (KDS) and US Military Standard (MIL) were compared in terms of safety and performance of lighting fixtures. The electrical and optical characteristics of the FL fixtures were experimentally analyzed to acquire design rules for LED luminaires. Based on the study results, we proposed the concept of a LED luminaire standard.

• 한국유기농업학회지
• /
• 제23권1호
• /
• pp.1-18
• /
• 2015

The purpose of this study is to examine the tendency of certified organic cosmetics market and the certification standards and regulations they are under, compare one of the most commonly used COSMOS-standard AISBL with the Korea Ministry of Food and Drug Safety (MFDS) organic cosmetic standard regulation. And then examining their differences and any potential issues is to present suggestions to be made as data for certification standard for natural & organic cosmetics in Korea regulation. This contents of study will be used as good research and development to promote the sustainable growth of the natural & organic cosmetic ingredients which have been grown by organic farmers certified. Also certified organic ingredients may help to growth the organic industry. I believe these are actual comparative for application to develop of natural and organic cosmetics in Korea as well the strengthening of the competitiveness of organic cosmetics certified in the world.

• 대한산업공학회지
• /
• 제16권1호
• /
• pp.1-15
• /
• 1990

An AQL type variables sampling system with switching rules is proposed. Comparative studies of existing variables sampling standards - MIL-STD-414, ANSI Z1.9, ISO 3951, and BS 6002 - are made, and simulation studies on switching procedures are conducted. Based on comparative and simulation studies, a variables sampling standard for Korean industry is proposed. The master sampling tables of the proposed standard are taken from the variables standard ANSI Z 1. 9 and the switching rules are matched to the attributes standard KS A 3109 to enable us to move between the proposed variables standard and KS A 3109. Composite OC and ASN curves of the proposed standard are calculated for selected combinations of lot sizes and AQL's and they are compared with those of ANSI Z1.9.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.455-463
• /
• 1998

The standardization urban transit project has been started by government and the Korean standard electrical railcar has been designed. The bodyshell of standard railcar is made of aluminium alloy. In the present paper, the design of its bodyshell is evaluated in the viewpoint of strength analysis. The loading condition is based on the 'Test Methods of Static Load for Body Structure of Electrical Multiple Unit', standard specification. The bodyshell of Korean standard EMU consist of longitudinal extrusion members which are double-skin structure type. The result in this paper is enough to satisfy strength requirement which is provided by standard specification. The comparison between actual experiment and analysis result will be presented in the next paper.

• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.3-5
• /
• 2023

Objective: This study introduces exposure concentrations of time-weighted average standard (TWA) evaluation and short-time exposure standard (STEL) evaluation for trichloroethylene in the cleaning process. Methods: Trichloroethylene measurement was conducted according to the KOSHA Guide (A-24-2019) method. It was carried out twice. Results: As a result of the first measurement, TWA concentration exceeded 4 times the exposure standard and STEL concentration exceeded 16 times, but the inaccuracy and breakthrough of the collection time could not be considered, so the second measurement was conducted. The second measurement result was lower than the first measurement result, but exceeded the exposure standards (TWA, STEL). Conclusions: We were able to confirm that the exposure level of workers in the cleaning process using trichloroethylene exceeded the exposure standard. And it is also considered necessary to grasp the approximate concentration using a detector tube in the preliminary survey.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• 대한치과교정학회지
• /
• 제31권1호
• /
• pp.149-157
• /
• 2001

본 연구의 목적은 새로이 생산된 국산 스테인레스 스틸호선의 특성을 평가하기 위하여, 현재까지 사용하고 있는 다른 스테인레스 스틸호선과 비교하여, 국산 스테인레스 스틸호선의 특성과 장단점을 분석하고 평가하여 임상적 사용시에 도움을 주고자 하는 것이다. 이를 위해 Unitek의 Standard, Resilient, Hi-T 3종류의 스테인레스 스틸호선과 Ormco 의 Stainless Steel, 진성기업의 Stainless Steel등 5종(0.016x0.022과 0.019x0.025)을 가지고 성분, 치수비교, 인장물성, 만곡피로도물성, 비틀림물성, 경도 및 표면등을 관찰하여 비교하여 다음과 같은 결론을 얻었다. 1. 인장물성을 보면, 최대강도는 0.016x0.025의 경우 Unitek Hi-T, Unitek Resilient, Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Standard 순이고, 0.019x0.025의 경우 Unitek Hi-T, Jinsung, Ormco, Unitek Resilient, Unitek Standard 의 순이었다. 2. 연신율은 0.016x0.022의 경우는 Unitek Standard, Ormco Stainless Steel, Unitek Hi-T, Unitek Resilient, Jinsung Stainless Steel의 순이었고, 0.019x0.025의 경우는 Unitek Hi-T, Unitek Standard, Ormco Stainless Steel, Jinsung Stainless Steel, Unitek Resilient의 순이었다. 3. 탄성계수는 0.016x0.022의 경우 Jinsung Stainless Steel, Unitek Hi-T, Unitek Resilient, Ormco Stainless Steel, Unitek Standard의 순이었고, 0.019x0.025의 경우 Unitek Resilient, Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Hi-T, Unitek Standard의 순이었다. 4. 만곡피로도실험은 0.016x0.022의 경우 Jinsung Stainless Steel이 8.4회로 구부림에 대한 가장 파절저항도가 컸으며, Unitek Hi-T, Unitek Standard, Unitek Resilient, Ormco Stainless Steel의 순이고 0.019x0.025의 경우는 Unitek Hi-T가 10.4회 견디고, Jinsung Stainless Steel, Unitek Resilient, Unitek Standard, Ormco Stainless Steel의 순이었다. 5. 비틀림실험은 0.016x0.022의 경우 Unitek Resilient가 가장 비틀림에 대한 저항이 큰데, 64.8회의 회전후 파절한다. 그 다음으로 Jinsung Stainless Steel, Unitek Hi-T, Ormco Stainless Steel, Unitek Standard(50.6회) 순이었다. 0.019x0.025의 경우 Jinsung Stainless Steel이 가장 커서 83.2회의 회전에 저항하고, Unitek Resilient, Unitek Standard의 순이고 Ormco와 Unitek Hi-T가 가장 저항력이 작았다. 6. 주사전자현미경으로 본 표면은 모든 제품에서 생산과정 중에 보이는 압흔과 pitting이 관찰되는데, 진성기업의 Stainless Steel은 가늘고 긴 압흔이 있으며 비교적 매끄러운 표면을 보이고, Unitek사의 경우 압흔과 함께 pitting 이 관찰되며, Ormco Stainless Steel의 경우 불규칙한 pitting이 다수 존재했다.

• 한국주거학회논문집
• /
• 제27권6호
• /
• pp.145-153
• /
• 2016

The purpose of this study is to grasp the effectiveness of evacuation safety design by verifying the appropriateness of the standard of occupant load factor for residential buildings. To this end, the definition and current standard of occupant load factor for residential buildings were analyzed, and the problems of the current standard were clarified by interviewing professionals. In addition, changes in occupant load factor were examined by year based on statistical research, and evaluation on the current standard $18.6m^2/pers.$ was performed. As for evaluation methods, the need of redesigning of evacuation capacity was investigated by using evacuation simulation. As a result of the analysis, the most serious problem was clarification of the applicable standard for residential officetel, where the average occupant load factor was $26.1m^2/pers.$, which was not appropriate. However, as a result of evaluation on evacuation capacity, although there was no difference between statistical research results and the current standard in terms of evacuation capacity, when the standard for business facilities was applied to officetel, evacuation time doubled. Thus, this study suggests that when the current standard is applied to residential officetel, it is necessary to separate between residential use and business use.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.73-78
• /
• 2010

재료의 인장 물성 측정 불확도 평가가 수행되었다. 인장 물성 측정에 영향을 주는 불확도의 요인이 구분되어 분석되었고 인장 시험으로부터 측정되는 측정량, 즉 탄성계수, 항복 강도 그리고 인장 강도의 불확도 평가 모델이 본 연구에서 제시되었고 각 측정량에 대한 대응하는 수학적 모델과 측정치로부터 각 측정치의 감도계수를 계산함으로서 유도 되었다. 각 모델에 근거하여 ISO 6892에 따라 결정되는 SUS316LN의 실험적 데이터로부터 인장 물성의 불확도가 평가되었다.

• 한국안전학회지
• /
• 제22권5호
• /
• pp.7-12
• /
• 2007

The safety standard for suspended access equipments(SAE) is developed. During the development of the safety standard, consideration was given to a close examination of the standards existing in other industrialized regions and nations such as the Eu.opean Union(EU), the United States, and Japan, as well as the existing domestic safety regulation. Also, a consideration was given to the appraising of the technical level and market conditions of the domestic industry. After careful examination of the current safety practices and issues, it was decided that the standard under development should closely follow those of the EU safety standard. The EU standard provides a detailed account of the calculation methods, safety and stability factors, testing apparatus and procedure, all under unified framework. A number of specific safety requirements have been modified in an effect to properly reflect the difficulties faced by the domestic industry. It is hoped that the safety standard developed here can serve as a valuable tool for policy decisions regarding worker safety.