• 제목/요약/키워드: Korean Slug

검색결과 215건 처리시간 0.027초

굴절률이 다른 실리콘 봉지재의 봉지 방법에 따른 UV-A LED의 광 특성에 관한 연구 (Optical Properties of UV LEDs depending on Encapsulate Method using Silicone Encapsulants with Different Refractive Indices)

  • 김완호;구대형;노주현;이경원;전시욱;김재필;여인선
    • 조명전기설비학회논문지
    • /
    • 제29권3호
    • /
    • pp.39-44
    • /
    • 2015
  • Optical characteristics including the radiant flux and viewing angle of UV LEDs were investigated according to both silicone encapsulants with different refractive indexes and lens shapes. Lead frame was fabricated using the enhanced heat dissipation characteristics with a heat slug structure and the reflector based on EMC(Epoxy Mold Compound) material. Four types of lens shapes were designed and their optical characteristics depending on the refractive index of silicone encapsulants were evaluated. The maximum radiant flux can be achieved when the height of lens are 1.32mm and 1.08mm for silicone encapsulants with low and high refractive indexes, respectively. Depending on the encapsulating method, the viewing angle changes from $148.9^{\circ}$ to $130.2^{\circ}$ for low refractive index and from $145.3^{\circ}$ to $136.8^{\circ}$ for high refractive index. As a result, it is found that the optical characteristics of UV LEDs can be controled through both encapsulating method and the refractive index of encapsulants.

한국산 산민달팽이 ( Incilaria fruhstorferi ) 소화관 상피조직의 미세구조 및 조직화학적 연구 (Ultrastructural and Histochemical Study on the Epithelia of Digestive Tract of a Korean Slug, Incilaria fruhstorferi)

  • 이정찬;장남섭;한종민
    • 한국패류학회지
    • /
    • 제13권2호
    • /
    • pp.143-160
    • /
    • 1997
  • 한국산 산민달팽이 Incilariafruhstorferi의 소화관을 부위별로 관찰하고, 소화관 상피조직을 구성하는 세포의 종류와 분포수 그리고 분비되는 과립 등을 미세구조적, 조직화학적으로 관찰하고 그 결과를 보고하고자 한다. 산민달팽이의 소화관은 식도, 위, 장, 직장 등으로 구성되어있으며, 식도는 다시 전식도, 소낭, 후식도로 나누어지고, 장은 전장과 중장, 후장 등으로 구분되었다. 소화관을 부위별롸 관찰한 결과 섬모원주상피세포 2종, 녹색과립세포 3종, 청색과립세포, 점액세포, 투명세포, 망상형세포 그리고 괴사형세포 등 모두 10종류가 확인되었다. 섬모원주세포는 A형과 B형 등 두 종으로 나뉘며, A형은 세포의 상단 자유면에 섬모와 미세융모가 밀생된데 비해, B형은 전자밀도가 높아서 검게 보이고, 장과 직장에서만 관찰되는 특징을 보였다. 섬모의 구조는 9 x 2 + 2 axoneme이었다. 녹색과립세포는 미세구조에 의해 A형, B형 그리고 C형등 3종으로 나누어지며, 소낭과 후식도, 위, 직장에서 주로 관찰되었다. A형과 B형은 Sudan black에 양성인 지방과립(1.36 x 1.6$\mu\textrm{m}$)만을 포함하고 있는데비해 C형은 글리코겐 과립도 포함하고 있었다. 청색과립세포는 10종류의 세포 중 가장 키가 크고 (35$\mu\textrm{m}$), Millon반응에 양성을 보이는 둥근과립(직경, 1.3$\mu\textrm{m}$)을 포함하고 있는데 과립들은 단백질성으로 확인되었다. 이들은 중장에서만 관찰되었다. 장과 직장에서 주로 많이 관찰되는 점액세포는 세포질 속에 전자밀도가 낮은 투명한 과립과 전자밀도가 높아서 검게 보이는 둥근과립(크기, 1.33 x 0.89$\mu\textrm{m}$)들을 포함하고 있었는데, 이들은 미성숙 시기에는 투명과립(직경, 2.66$\mu\textrm{m}$)으로 관찰되었다. PAS-alcian blue(pH 2.5)반응에서 투명과립은 alcianophillia로 나타난 반면, 검은 과립은 PAS에 양성반을을 보이며, 각각 산성점액과 중성점액과립으로 확인되었다. 투명세포는 광학현미경 관찰에서 A형과 B형으로 구분되었으나, A형은 전자현미경 관찰에서 신경내분비세포로 확인된 반며, B형은 지방과립을 소지한 지방저장세포로 각각 확인되었다. 신경내분비세포가 소지한 과립의 크기는 0.16$\mu\textrm{m}$ 정도였다. 망상형세포는 주로 위에서 관찰되는 형태가 불규칙한 작은 세포로서 세포질에 비해 큰 핵을 소지하고 있었다. 소량의 세포질 돌기에는 사립체와 과립성소포체를 포함하고 있다. 괴사형세포는 후장과 직장에서 주로 많이 관찰되고, 점액세포의 점액과립이 분비된 후, 붕괴되는 과정에서 형성된 것으로 확인되었다.

  • PDF

Extracellular acidity enhances tumor necrosis factor-related apoptosis-inducing ligand (TRAIL)-mediated apoptosis via DR5 in gastric cancer cells

  • Hong, Ran;Han, Song Iy
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제22권5호
    • /
    • pp.513-523
    • /
    • 2018
  • The tumor microenvironment greatly influences cancer cell characteristics, and acidic extracellular pH has been implicated as an essential factor in tumor malignancy and the induction of drug resistance. Here, we examined the characteristics of gastric carcinoma (GC) cells under conditions of extracellular acidity and attempted to identify a means of enhancing treatment efficacy. Acidic conditions caused several changes in GC cells adversely affecting chemotherapeutic treatment. Extracellular acidity did inhibit GC cell growth by inducing cell cycle arrest, but did not induce cell death at pH values down to 6.2, which was consistent with down-regulated cyclin D1 and up-regulated p21 mRNA expression. Additionally, an acidic environment altered the expression of atg5, HSPA1B, collagen XIII, collagen XXAI, slug, snail, and zeb1 genes which are related to regulation of cell resistance to cytotoxicity and malignancy, and as expected, resulted in increased resistance of cells to multiple chemotherapeutic drugs including etoposide, doxorubicin, daunorubicin, cisplatin, oxaliplatin and 5-FU. Interestingly, however, acidic environment dramatically sensitized GC cells to apoptosis induced by tumor necrosis factor-related apoptosis-inducing ligand (TRAIL). Consistently, the acidity at pH 6.5 increased mRNA levels of DR4 and DR5 genes, and also elevated protein expression of both death receptors as detected by immunoblotting. Gene silencing analysis showed that of these two receptors, the major role in this effect was played by DR5. Therefore, these results suggest that extracellular acidity can sensitize TRAIL-mediated apoptosis at least partially via DR5 in GCs while it confers resistance to various type of chemotherapeutic drugs.

방전 플라즈마 소결(Spark Plasma Sintering) 방법에 의해 제조된 Nb-Si-B계 합금의 미세조직 특성 (Microstructure Characterization of Nb-Si-B alloys Prepared by Spark Plasma Sintering Process)

  • 김상환;김남우;정영근;오승탁;김영도;이성;석명진
    • 한국분말재료학회지
    • /
    • 제22권6호
    • /
    • pp.426-431
    • /
    • 2015
  • Microstructural examination of the Nb-Si-B alloys at Nb-rich compositions is performed. The Nb-rich corner of the Nb-Si-B system is favorable in that the constituent phases are Nb (ductile and tough phase with high melting temperature) and $T_2$ phase (very hard intermetallic compound with favorable oxidation resistance) which are good combination for high temperature structural materials. The samples containing compositions near Nb-rich corner of the Nb-Si-B ternary system are prepared by spark plasma sintering (SPS) process using $T_2$ and Nb powders. $T_2$ bulk phase is made in arc furnace by melting the Nb slug and the Si-B powder compact. The $T_2$ bulk phase was subsequently ball-milled to powders. SPS is performed at $1300^{\circ}C$ and $1400^{\circ}C$, depending on the composition, under 30 MPa for 600s, to produce disc-shaped specimen with 15 mm in diameter and 3 mm high. Hardness tests (Rockwell A-scale and micro Vickers) are carried out to estimate the mechanical property.

패류의 중금속 축적에 관한 연구 1. 녹색 굴의 동함유량에 관하여 (ACCUMULATION OF HEAVY METAL IN SHELLFISH 1. On the Copper Content in Green Oysters)

  • 조용계;김춘권
    • 한국수산과학회지
    • /
    • 제4권2호
    • /
    • pp.61-65
    • /
    • 1971
  • 장항만 연안에 서식하는 굴과 대천지방에 서식하는 굴의 연체부의 동함량에 관하여 1970년 10월 부터 1971년 2월까지 4개월에 걸쳐 채집 분석했다. 이 양군간에 굴 연체부의 동함량에는 현저한 유의차가 인정되였다. 장항만 연안에 서식하는 굴은 장항제연소에서 흘러나오는 폐수와 광재에서 용출하는 동에 의하여 주로 오염되었다고 볼 수 있다. 장항만 연안에 서식하는 굴은 동함량이 $434.4{\pm}141.9mg$ Cu/kg wet base였으며, 대천지방에 서식하는 비오염된 굴은 평균 $19.0{\pm}4.9mg/kg$ wet base의 수치를 나타냈다. 끝으로, 본 실험을 도와준 최병선군과 전의식군에게 사의를 표하는 바이다.

  • PDF

원관 내 왕복유동에 따른 열전달특성의 실험적 연구 (Experimental investigation on the heat transfer characteristics of an oscillatory pipe flow)

  • 박상진;이대영;노승탁
    • 대한기계학회논문집B
    • /
    • 제20권6호
    • /
    • pp.1959-1970
    • /
    • 1996
  • 스터링 또는 VM 사이클 기긱의 열교환기의 구성요소 중 냉각부와 가열부만으로 이루어진 실험장치를 구성하고 벽온도분포와 열전달량을 측정하여 왕복유동주파수와 왕복유동거리비가 열전달에 미치는 영향을 실험하였다. 냉각부와 가열부와 온도차를 일정하게 유지하기 위해서는 왕복유동의 주파수와 왕복유동거리비가 증가함에 따라 열유속이 증가되어야 함을 보였다. 이는 왕복유동의 주파수와 왕복유동거리비가 중감함에 따라 가열부와 냉각부 사이의 열전달, 즉 열교환기 길이 방향으로의 열전달이 증가함을 의미한다. 또한 실험과 1차원 속도가정에 의한 해석이 매우 잘 일치함을 확인하였다. 가열부에서 반경방향응로의 유체온도분포를 측정하고 열전달계수를 구하였다. 반경방향 온도분포는 왕복유동주파수가 빨라질수록 포물선형태에서 벗어나 편평한 분포를 보이고 무차원 주파수가 커지고 열교환기 길이가 유체의 왕복거리에 비하여 짧아질수록 반경방향으로의 열전달이 향상되었다. 따라서 가열부에서의 평균 열전달 계수 역시 왕복유동주기와 열교환기가 짧을 때 더 크게 나타났다. 결론적으로 같은 전열면적을 가진다면 짧은 열교환기가 상대적으로 유리하나 왕복주파수가 빨라지는 것은 한주기당 열전달량의 측면에서 오히려 효율을 저하시키는 효과를 가져온다.

단일 가열봉의 재관수 시 2상유동 및 벽면 열전달에 관한 실험적 연구 (Experimental investigation of two-phase flow and wall heat transfer during reflood of single rod heater)

  • 박영재;김형대
    • 한국가시화정보학회지
    • /
    • 제18권3호
    • /
    • pp.23-34
    • /
    • 2020
  • Two-phase flow and heat transfer characteristics during the reflood phase of a single heated rod in the KHU reflood experimental facility were examined. Two-phase flow behavior during the reflooding experiment was carefully visualized along with transient temperature measurement at a point inside the heated rod. By numerically solving one-dimensional inverse heat conduction equation using the measured temperature data, time-resolved wall heat flux and temperature histories at the interface of the heated rod and coolant were obtained. Once water coolant was injected into the test section from the bottom to reflood the heated rod of >700℃, vast vapor bubbles and droplets were generated near the reflood front and dispersed flow film boiling consisted of continuous vapor flow and tiny liquid droplets appeared in the upper part. Following the dispersed flow film boiling, inverted annular/slug/churn flow film boiling regimes were sequentially observed and the wall temperature gradually decreased. When so-called minimum film boiling temperature reached, the stable vapor film between the heated rod and coolant was suddenly collapsed, resulting in the quenching transition from film boiling into nucleate boiling. The moving speed of the quench front measured in the present study showed a good agreement with prediction by a correlation in literature. The obtained results revealed that typical two-phase flow and heat transfer behaviors during the reflood phase of overheated fuel rods in light water nuclear reactors are well reproduced in the KHU facility. Thus, the verified reflood experimental facility can be used to explore the effects of other affecting parameters, such as CRUD, on the reflood heat transfer behaviors in practical nuclear reactors.

석탄층 메탄가스 저류층의 유정생산시험 설계 및 수행절차 수립연구 (Development of Designing and Performing Procedure for Well Test in Coalbed Methane(CBM) Reservoir)

  • 박진영;이정환
    • 자원환경지질
    • /
    • 제46권4호
    • /
    • pp.279-289
    • /
    • 2013
  • 석탄층 메탄가스(coalbed methane; CBM)를 개발하는데 있어서 생산성과 경제성을 좌우하는 절대투과도(absolute permeability)를 산출하는 것은 매우 중요하다. 절대투과도를 측정하는 방법에는 코어분석(core analysis)과 유정생산 시험(well test) 등이 있다. 하지만 코어분석을 통해 도출된 절대투과도는 CBM 저류층을 대표할 수 없기에 일반적으로 유정생산시험을 통해 절대투과도가 산출된다. 이에 본 연구에서는 CBM 저류층에 적용 가능한 유정생산시험을 분류하고 각 시험기법별 특성 및 장 단점을 분석하였다. 이를 기반으로 유정생산시험 설계 및 수행절차를 수립하였으며, 유정생산시험 수행 후 취득된 자료를 통해 절대투과도와 손상지수(skin factor)와 같은 저류층 물성을 도출하기 위한 자료해석 절차를 제시하였다.

Thermal Transient Characteristics of Die Attach in High Power LED Package

  • Kim Hyun-Ho;Choi Sang-Hyun;Shin Sang-Hyun;Lee Young-Gi;Choi Seok-Moon;Oh Yong-Soo
    • 마이크로전자및패키징학회지
    • /
    • 제12권4호통권37호
    • /
    • pp.331-338
    • /
    • 2005
  • The rapid advances in high power light sources and arrays as encountered in incandescent lamps have induced dramatic increases in die heat flux and power consumption at all levels of high power LED packaging. The lifetime of such devices and device arrays is determined by their temperature and thermal transients controlled by the powering and cooling, because they are usually operated under rough environmental conditions. The reliability of packaged electronics strongly depends on the die attach quality, because any void or a small delamination may cause instant temperature increase in the die, leading sooner or later to failure in the operation. Die attach materials have a key role in the thermal management of high power LED packages by providing the low thermal resistance between the heat generating LED chips and the heat dissipating heat slug. In this paper, thermal transient characteristics of die attach in high power LED package have been studied based on the thermal transient analysis using the evaluation of the structure function of the heat flow path. With high power LED packages fabricated by die attach materials such as Ag paste, solder paste and Au/Sn eutectic bonding, we have demonstrated characteristics such as cross-section analysis, shear test and visual inspection after shear test of die attach and how to detect die attach failures and to measure thermal resistance values of die attach in high power LED package. From the structure function oi the thermal transient characteristics, we could know the result that die attach quality of Au/Sn eutectic bonding presented the thermal resistance of about 3.5K/W. It was much better than those of Ag paste and solder paste presented the thermal resistance of about 11.5${\~}$14.2K/W and 4.4${\~}$4.6K/W, respectively.

  • PDF

이상 유동 비등 시 마이크로 채널에서의 열전달 특성과 유동양식 조사 (Heat transfer characteristic and flow pattern investigation in micro-channels during two-phase flow boiling)

  • 최용석;임태우
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권7호
    • /
    • pp.696-701
    • /
    • 2015
  • 본 연구에서는 깊이 0.2 mm, 폭 0.45 mm, 길이 60mm 그리고 채널의 개수는 15개인 마이크로 채널에서 이상 유동비등에 관한 실험을 수행하였다. 작동유체로는 FC-72가 사용되었으며, 실험은 질량유속과 열유속 각각 $200-400kg/m^2s$, $5-40kW/m^2$ 범위와 증기 건도 0.1-0.9 범위에서 수행되었다. 열전달 계수는 낮은 열유속에서는 급격하게 감소하였으며, 일정 열유속 이상에서는 거의 일정하게 유지되었다. 측정된 열전달 계수로부터 기존의 방법을 이용하여 기포류, 슬러그류, 천류 그리고 파형/환상류의 유동양식으로 분류하였다. 또한 분류한 유동양식의 결과를 파형/환상류 영역으로의 천이 기준과 비교하였다. 하지만 기존의 천이 기준으로는 본 연구의 실험결과를 만족스럽게 예측하지 못하였다.