• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.285-294
• /
• 2004

Pressure wave propagation in the discharge piping with a sparger submerged in a water pool, following the opening of a safety relief valve, is analyzed. To predict the pressure transient behavior, a RELAP5/MOD3 code is used. The applicability of the RELAP5 code and the adequacy of the present modeling scheme are confirmed by simulating the applicable experiment on a water hammer with voiding. As a base case, the modeling scheme was used to calculate the wave propagation inside a vertical pipe with sparger holes and submerged within a water pool. In addition, the effects on wave propagation of geometric factors, such as the loss coefficient, the pipe configuration, and the subdivision of sparger pipe, are investigated. The effects of inflow conditions, such as water slug inflow and the slow opening of a safety relief valve are also examined.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.1
• /
• pp.65-72
• /
• 1993

An experiment has been carried out to identify flow patterns in a horizontal condensing flow with R-113. Characteristics of flow patterns were determined based upon a statistical analysis of differential pressure fluctuations at an orifice. The probability density function and power spectral density function of instantaneous pressure drop curves for various flow conditions were obtained. In comparison to the results of air-water flows, the flow patterns in a condensing flow such as annular, wavy, slug and plug could be identified. The experimental data determined by this technique were compared with the flow pattern maps suggested by other investigators. The result indicates that the statistical characteristics of differential pressure fluctuations at an orifice may be a useful tool for identifying flow patterns both in condensing flows and in adiabatic two-phase flows.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.12-23
• /
• 2004

In the present study a new measurement technique has been developed, which uses an ultrasonic transmission signal in order to identify the vertical two phase flow pattern. The ultrasonic measurement system developed in the present study not only provides the information required for the identification of vertical two phase flow patterns but also makes real time identification possible. Various vertical two phase flow patterns such as bubbly, slug, churn, annular flow etc. have been accurately identified with the present ultrasonic measurement system under atmospheric condition. In addition, the present test apparatus can practically simulate the ultrasonic propagation characteristics under high temperature and high pressure systems. Therefore, it is expected that the present ultrasonic flow pattern identification technique could be applicable to the vertical two phase flow systems under high temperature and high pressure conditions.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.85-100
• /
• 1997

The heterogeneity of hydraulic conductivity of Metropolitan Waste Landfill is analized by using geostatistical methods and the contaminant transport analysis is performed by using heterogeneous hydraulic conductivity. The hydraulic conductivity data are obtained from laboratory pressurized permeability tests and the insitu, Slug test. Geostatistical methods used in this analysis are Ordinary Kriging and conditional simulation. It is concluded that the heterogeneities of hydraulic conductivity obtained from conditional simulation are greater than those from Ordinary Kriging analysis. The movement of the contaminant on the hydraulic conductivity with greater heterogeneity obtained from conditional simulation is faster than that observed in Ordinary Kriging analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.377-383
• /
• 2005

This paper deals with the flow characteristics of air-water two-phase flow in a vertical tube of 10mm I.D. and 600mm in length at an adiabatic condition. The obtained experimental data were covered with the liquid superficial velocity ranging from 0.095m/s to 2.56m/s. and the gas superficial velocity ranging from 0.032m/s to 21.08m/s. The effects of the gas and liquid superficial velocity on the flow pattern transitions, frictional pressure drop, and film thickness and gas-liquid interface roughness were also examined. It was found that the film thickness increased and the liquid film wave length was more longer with the liquid superficial velocity $j_L$ increasing at $j_G$ constant. It was also showed that the frictional pressure drops were experienced in three regions. namely increasing region(bubbly flow), decreasing region (Taylor bubble and slug flows) and re-increasing region (annular flow).

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.355-363
• /
• 2018

There are serious issues with the application of surfactant flooding as a third recovery method, such as surfactant slug losses. In this study,the impact of the salinity gradient on the remobilization of oiltrapped in Berea sandstone was investigated by emphasizing the surfactant adsorption gradient and phase behavior to determine the optimal salinity of the chosen surfactant concentration for investigating the salinity gradient. Three salinity-gradient schemes were applied to six cores saturated with light and heavy oils. The positive salinity gradient provided the best recovery results with an in situ microemulsion formation that could be observed in the fluid collector.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.286-300
• /
• 2002

An algorithm for the sodium boiling model has been developed for calculation of the void reactivity feedback as well as the fuel and cladding temperatures in the KALIMER core after onset of sodium boiling. Modeling of sodium boiling in liquid metal reactors using sodium as a coolant is necessary because of phenomenon difference comparing with that observed generally in light water reactor systems. The applied model to the algorithm is the multiple-bubble slug ejection model. It allows a finite number of bubbles in a channel at any time. Voiding is assumed to result from formation of bubbies that (ill the whole cross section of the coolant channel except for the liquid film left on the cladding surface. The vapor pressure, currently, is assumed to be uniform within a bubble The present study is focused on not only demonstration of the vapor bubble behavior predicted by the developed model, but also confirmation of a qualitative acceptance for the model. As a result, the model can represent important phenomena in the sodium boiling, but it is found that further effort is also needed for its completition.

• Korean journal of applied entomology
• /
• v.51 no.1
• /
• pp.33-37
• /
• 2012

This study was conducted to investigate food preference and developmental characteristics of the gray field slug, $Deroceras$ $reticulatum$ M$\ddot{u}$ller (Stylommatophora: Limacidae) using various foods. The food preference of $D.$ $reticulatum$ was most highest on Chinese cabbage ($Brassica$ $campestris$ L., followed on cucumber ($Cucumis$ $sativus$ L.), and significantly low on beet ($Beta$ $vulgaris$ var. Ruba), kale($Brassica$ $oleracea$ L. var. $acephala$ D.C), carrot (Daucus carota L.) and Chinese cabbage ($Brassica$ $campestris$ L.) which were not different significantly. The total number of eggs laid by $D.$ $reticulatum$ was the highest (n = 109.6) on cucumber and the lowest (n = 10.1) on leaf perilla ($Perilla$ $frutescens$ var. $japonica$ Hara). Hatchability was the highest (92.4%) on cucumber and the lowest (62.5%) on leaf perilla. The egg developmental period was not significantly different from 12 days to 13 days among host plants. Juvenile period and adult longevity ranged from 75 days to 111 days and 66 days to 187 days, respectively. Thereby, life span from egg to adult longevity of $D.$ $reticulatum$ was the longest on cucumber with 273 days and the shortest on 190 days on leaf perilla.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.105-110
• /
• 2018

Melittin is the main component of apitoxin (bee venom) that has been reported to have anti-inflammatory and anti-cancer effects. Herein, we demonstrated that inhibition of epithelial-mesenchymal transition (EMT) by melittin causes suppression of cancer cell migration and invasion. Melittin significantly suppressed the epidermal growth factor (EGF)-induced cell migration and invasion in lung cancer cells. Moreover, melittin up-regulated the expression of epithelial marker protein, E-cadherin, and down-regulated the expression of EMT related proteins, vimentin and fibronectin. Mechanistic studies revealed that melittin markedly suppressed the expression of EMT mediated transcription factors, ZEB2, Slug, and Snail. The EGF-induced phosphorylation of AKT, mTOR, P70S6K, and 4EBP1 was also inhibited by melittin, but not that of ERK and JNK. Therefore, the inhibitory effect of melittin on migration and invasion of lung cancer cells may be associated with the inhibition of EMT via blocking of the AKT-mTOR-P70S6K-4EBP1 pathway.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.15-22
• /
• 2016

Hydraulic falling head and slug tests were carried out in an alluvium aquifer using a borehole stability device. The hydraulic testing had proved difficult in alluvial formations of sands and gravels due to borehole collapse and unstable borehole walls within the test section. This study aims to improve the hydraulic test results by using a borehole stability device. The device can minimize the collapse of borehole walls, and the use of a filter with a constant opening ratio improves the calculations per unit area of the test section. Permeability obtained from the falling head test without a borehole stability device was 8.82 × 10⁻⁵m/sec. When the borehole stability device was installed in the same test section the measured permeability increased to 4.00 × 10⁻⁴m/sec, which is 4.5 times that obtained without the borehole device. The relatively low permeability obtained using the conventional test method is attributed to the presence of a fine-grained slime generated during drilling and a reduction of the test area in the test interval due to a gradual collapse of the borehole walls. This study considers how the use of a borehole stability device to prevent borehole collapse can influence the results of hydraulic tests in alluvial formations. It is expected that the results can be used as a basis for improving the reliability and applicability of hydraulic tests performed in alluvial aquifers.