• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.403-410
• /
• 2018

Background Radiation-induced skin injury is a dose-limiting complication of radiotherapy. To investigate this problem and to develop a framework for making decisions on treatment and dose prescription, a murine model of radiation-induced skin injury was developed. Methods The dorsal skin of the mice was isolated, and irradiation was applied at single doses of 15, 30, and 50 Gy. The mice were followed for 12 weeks with serial photography and laser Doppler analysis. Sequential skin biopsy samples were obtained and subjected to a histological analysis, immunostaining against transforming growth factor beta (TGF-${\beta}$), and Western blotting with Wnt-3 and ${\beta}$-catenin. Increases in the levels of TGF-${\beta}$, Wnt, and ${\beta}$-catenin were detected after irradiation. Results All tested radiation doses caused progressive dermal thickening and fibrosis. The cause of this process, however, may not be radiation alone, as the natural course of wound healing may elicit a similar response. The latent appearance of molecular and histological markers that induce fibrosis in the 15 Gy group without causing apparent gross skin injuries indicates that 15 Gy is an appropriate dose for characterizing the effects of chronic irradiation alone. Thus, this model best mimics the patterns of injury that occur in human subjects. Conclusions This animal model can be used to elucidate the gross and molecular changes that occur in radiation-induced skin injury and provides an effective platform for studying this adverse effect without complicating the process of wound healing.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.363-371
• /
• 2009

This study is purposed to investigate that current rubbing technique could be replaced by the photographic rubbing techniques with the photographic lighting and digital techniques. The lighting technique is based on the "texture description theory" using the electric flash and the intaglio epitaph was emphasized from the observation of the both side because it is purposed to decipher epitaph. The photographs were retouched using the photoshop to emphasize epitaph and the spots from the lichen on the tombstone were softened. Especially, it shows that faint epitaph could be deciphered if the digital techniques could be used practically even though some part of the epitaph was destroyed or peeled. Furthermore, it will help to investigate, protect and restore the cultural properties because it surely makes the recording of the material, weathering, peeling of the tombstone much easier than the current rubbing technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.206-208
• /
• 2010

We propose a retouching method that converts a photography taken by smartphone to a watercolor painting image using bilateral filtering and mean shift segmentation which are mostly used in image processing. The first step is to convert an input image to fit the screen resolution of smartphone. And next step is to weaken high frequency components of the image, while preserving the edge of image using the bilateral filtering. And after that we perform mean shift segmentation from the bilateral filtered image. We apply parameters of mean shift segmentation considering the processing speed of smartphone. Experimental result shows that our method can be applied to various types of image and bring better result.

• Journal of Mechanical Science and Technology
• /
• v.16 no.2
• /
• pp.165-174
• /
• 2002

In the present study, interfacial cracks between an isotropic and orthotropic material, subjected to static far field tensile loading are analyzed using the technique of photoelasticity. The fracture parameters are extracted from the full-field isochromatic data and the same are compared with that obtained using boundary collocation method. Dynamic photoelasticity combined with high-speed digital photography is employed for capturing the isochromatics in the case of propagating interfacial cracks. The normalized stress intensity factors for static cracks are greate. when ${\alpha}$: 90$^{\circ}$(fibers perpendicular to the interface) than when ${\alpha}$=0$^{\circ}$(fibers parallel to the interface), and those when ${\alpha}$=90$^{\circ}$are similar to ones of isotropic material. The dynamic stress intensity factors for interfacial propagating cracks are greater when ${\alpha}$=0$^{\circ}$ than ${\alpha}$=90$^{\circ}$. For the velocity ranges (0.1 < C/C$\sub$s1/<0.7) observed in this study, the complex dynamic stress intensity factor │K$\sub$D/│increases with crack speed c, however, the rate of increase of │K$\sub$D/│with crack speed is not as drastic as that reported for homogeneous materials.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.351-358
• /
• 2006

The capability of high pressure injection with small fuel quantify at all engine operating conditions is one of the main feature in common rail fuel injection system, which is used in small and light-duty Diesel engine. The key parameter for the better atomized fuel sprays and multiple injections of this common rail fuel injection control, that can be freely selected irrespective of the engine speed and load is the mechanism controlling the needle energizing and movement in high pressure Diesel injector. In the electro-hydraulic injector, the injection nozzle is being opened and closed by movement of the injector's needle which is balanced by pressure between the nozzle seat and the needle control chamber. This study describes the macroscopic spray structure characteristics of the common rail Diesel injectors with different electric driving method i.e. the solenoid-driven and piezo-driven type. The macroscopic spray characteristics such as spray tip speed. spray tip penetration and spray cone angle were investigated by the high speed spray, which is measured by the back diffusion light illumination method with optical system for the high speed temporal photography in a constant volume chamber pressurized by nitrogen gas. As the results, the prototype piezo-driven injector system was designed and fabricated for the first time in domestic case and the effect of injector's needle response driven by different drive type was compared between the solenoid and piezo-driven injector It was found therefore. that the piezo-driven injector showed faster needle response and had better needle control capability by altering the electric input value than the solenoid-driven injector.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2230-2250
• /
• 2015

Multiple projectors with partially overlapping regions can be used to project a seamless image on a large projection surface. With the advent of high-resolution photography, such systems are gaining popularity. Experts set up such projection systems by subjectively identifying the types of errors induced by the system in the projected images and rectifying them by optimizing (correcting) the parameters associated with the system. This requires substantial time and effort, thus making it difficult to set up such systems. Moreover, comparing the performance of different multi-projector display (MPD) systems becomes difficult because of the subjective nature of evaluation. In this work, we present a framework to quantitatively determine the quality of an MPD system and any image projected using such a system. We have divided the quality assessment into geometric and photometric qualities. For geometric quality assessment, we use Feature Similarity Index (FSIM) and distance-based Scale Invariant Feature Transform (SIFT). For photometric quality assessment, we propose to use a measure incorporating Spectral Angle Mapper (SAM), Intensity Magnitude Ratio (IMR) and Perceptual Color Difference (ΔE). We have tested the proposed framework and demonstrated that it provides an acceptable method for both quantitative evaluation of MPD systems and estimation of the perceptual quality of any image projected by them.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.279-286
• /
• 2011

Purpose: Chin is located in a prominent position, and is important to balance and harmony of the face. Genioplasty is widely performed with patients' high satisfaction, yet being relatively simple procedure. Recently in analysis of dentofacial trait, three rotational variables of yaw, pith, and roll are considered with three translational variables (forward/backward, up/down, right/left). And we could correct chin deformity effectively by applying the three rotational variables with three translational variables in genioplasty. Methods: Twenty-eight patients who have chin deformity underwent osseous genioplasty. Preoperative photography, facial three dimensional computed tomography, and cephalography were taken while chin deformities were accessed. The chin deformity was classified into four categories; macrogenia, microgenia, asymmetric chin deformity, and combined chin deformity groups. According to the nature of chin deformities and the patients' desire, preoperative plans were formulated, in consideration of three rotational variables and translational variables. Through intraoral approach, anterior mandible was exposed in the subperiosteal plane between the mental foramens and beneath the mental foramens. In the anterior mandible, vertical and horizontal grid lines with 5 mm intervals were marked to confirm the spatial location of osteomized bone segment after osteotomy. Chin repositioning was done in consideration of axial rotation and planar translation. Results: Most of the patients had achieved satisfactory results with few complications. By considering the three rotational variables, it was possible to make the chin repositioning effectively. One of the patients complained about insufficient chin correction. In other case, persistent sensory impairment around chin was observed. Conclusion: In conclusion, it is worthwhile to apply preoperative analysis and operative procedures in consideration of a three rotational variables with three translational variables in genioplasty.

• Archives of Plastic Surgery
• /
• v.44 no.5
• /
• pp.370-377
• /
• 2017

Background Composite grafts are frequently used for facial reconstruction. However, the unpredictability of the results and difficulties with large defects are disadvantages. Adipose-derived stem cells (ADSCs) express several cytokines, and increase the survival of random flaps and fat grafts owing to their angiogenic potential. Methods This study investigated composite graft survival after ADSC injection. Circular chondrocutaneous composite tissues, 2 cm in diameter, from 15 New Zealand white rabbits were used. Thirty ears were randomly divided into 3 groups. In the experimental groups (1 and 2), ADSCs were subcutaneously injected 7 days and immediately before the operation, respectively. Similarly, phosphate-buffered saline was injected in the control group just before surgery in the same manner as in group 2. In all groups, chondrocutaneous composite tissue was elevated, rotated 90 degrees, and repaired in its original position. Skin flow was assessed using laser Doppler 1, 3, 6, 9, and 12 days after surgery. At 1 and 12 days after surgery, the viable area was assessed using digital photography; the rabbits were euthanized, and immunohistochemical staining for CD31 was performed to assess neovascularization. Results The survival of composite grafts increased significantly with the injection of ADSCs (P<0.05). ADSC injection significantly improved neovascularization based on anti-CD31 immunohistochemical analysis and vascular endothelial growth factor expression (P<0.05) in both group 1 and group 2 compared to the control group. No statistically significant differences in graft survival, anti-CD31 neovascularization, or microcirculation were found between groups 1 and 2. Conclusions Treatment with ADSCs improved the composite graft survival, as confirmed by the survival area and histological evaluation. The differences according to the injection timing were not significant.

• Archives of Craniofacial Surgery
• /
• v.20 no.6
• /
• pp.361-369
• /
• 2019

Background: Trauma is one of the most common causes of enophthalmos, and post-traumatic enophthalmos primarily results from an increased volume of the bony orbit. We achieved good long-term results by simultaneously using an anatomical absorbable implant and iliac bone graft to correct post-traumatic enophthalmos. Methods: From January 2012 to December 2016, we performed operations on seven patients with post-traumatic enophthalmos. In all seven cases, reduction surgery for the initial trauma was performed at our hospital. Hertel exophthalmometry, clinical photography, three-dimensional computed tomography (3D-CT), and orbital volume measurements using software to calculate the specific volume captured on 3D-CT (ITK-SNAP, Insight Toolkit-SNAP) were performed preoperatively and postoperatively. Results: Patients were evaluated based on exophthalmometry, clinical photographs, 3D-CT, and orbital volume measured by the ITK-SNAP program at 5 days and 1 year postoperatively, and all factors improved significantly compared with the preoperative baseline. Complications such as hematoma or extraocular muscle limitation were absent, and the corrected orbital volume was well maintained at the 1-year follow-up visit. Conclusion: We present a method to correct enophthalmos by reconstructing the orbital wall using an anatomical absorbable implant and a simultaneous autologous iliac bone graft. All cases showed satisfactory results for enophthalmos correction. We suggest this method as a good option for the correction of post-traumatic enophthalmos.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.551-554
• /
• 2008

Do subject addition of existent picture reflex inside in this treatise as system that confirmation is available, do subject addition of picture reflex inside through GPS's photography position and Come on! direction angle of deviation campus to do confirmation possibility system design. Constructed each environment of Windows Operating System and embedded system environment for verification of system that is subject position of designed picture reflex also. To development environment of embedded system S3C2440A & used PXA270 processor, Camera and GPS in development baud, Come on! include deviation campus, and development language embodied in C language, and debugging environment did debugging using GCC compiler of Linux environment. PC software for verification designed system to confirm for subject position confirmation of picture reflex through Almap, Google Eartch developed verification software using visual C++. Also, groped way to utilize picture file by various field including position information within picture. Confirmed that decreased by error extent 1m within of radius 10m that is existent GPS's error extent as verification result.