• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.110-112
• /
• 2003

The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multispectral automatic Aerial photographic system. This system's Multi-spectral camera can catch the visible (RGB) and infrared (NIR) bands (3032${\ast}$2008 pixel) image. Our system consists of a thermal infrared camera and automatic balance control, and it managed and controlled by a palm-top computer. And it includes a camera gimbals system, GPS receiver, weather sensor and etc. As a result, we have successfully tested its ability to acquire aerial photography, weather data, as well as GPS data, making it a very flexible tool for environmental data monitoring.

• Archives of Plastic Surgery
• /
• v.32 no.5
• /
• pp.582-588
• /
• 2005

Digital imaging is emerging as a standard method for patient documentation in clinical setting. Managing patient expectations before aesthetic surgery can greatly improve patient satisfaction after surgery. The patient who visited for plastic surgery wants a predicted figure after the operation. A virtual plastic surgery software is necessary in order to satisfy the desire of patients. Adobe $Photoshop^{(R)}$ is the professional standard in desktop digital imaging, offers indispensable new features for graphic and web design, photography, and video. Using imaging technology, it takes just minutes to realistically simulate the results of double eyelid operation, liposuction, rhinoplasty or any other aesthetic procedure. The aim of this study is to analyze the significance of the digital image processing and to introduce the virtual plastic surgery using Adobe $Photoshop^{(R)}$.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.26-33
• /
• 2002

This study was undertaken to obtain the fundamental knowledges on the weld deflects and it's realtime monitoring method. The paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurements during $CO_2$ laser welding of STS 304 stainless steel and A5083 aluminum alloy in different welding condition. The characteristic frequencies of plasma and keyhole fluctuations at different welding speed and shield gases were measured and compared with the results of Fourier analyses of temporal AE and LE spectra, and they had considerably good agreement with keyhole and plasma fluctuation. Namely, the low frequency peaks of AE and LE shifted to higher frequency range with the welding speed increase, and leer the argon shield gas it was higher than that in helium and nitrogen gases. The low frequencies dominating in fluctuation spectra of LE probably reflect keyhole opening instability. It is possible to monitor the weld bead deflects by analyzing the acoustic and/or plasma light emission signals.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.33-41
• /
• 2021

As interest in drones controlled by remote technology rapidly increases worldwide, drones are used in many fields such as military, rescue, and transportation as future innovations in many countries. In particular, as the drone has been spotlighted as a new future strategic industry, it is also used for public purposes such as disaster relief and crime investigation. However, security concerns such as the penetration of major national facilities, collisions with aircraft, and the possibility of privacy infringement due to aerial photography are also being raised. Unlike the increased interest in drones, there have been few studies on drone use, drone safety, and public attitudes toward drone use. This paper analyzed the perceptions of drone attitudes, drone stability and policy support for drones for Korean and United Kingdom.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.78-81
• /
• 2019

In this study, we will analyze the design, development and application of these small drones using open source. These drones are used in flight exercises, aerial photography, and coding education. In the era of the fourth industrial revolution, such as the development of sensor technology, expansion of open source sharing, and application of artificial intelligence, Is expected to be able to demonstrate convergence. In this paper, we have studied the design and fabrication of small drones using open source. In the case of drones, various functions and differentiated materials are required depending on the application, and the future development of the unmanned mobile object, namely the drone, in which the creativity and the technology are combined with each other continues to be enhanced by the improvement of autonomy and artificial intelligence. Software-based architecture-based technologies have been developed in collaboration with embedded SWs that combine sensors, motors, and control systems. In hardware, it is customary to use a combination of materials and design to increase the freedom of design. It will be made in a free structure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4413-4425
• /
• 2020

In order to completely record all the information of realistic scenes, high dynamic range (HDR) images have been widely used in virtual reality, photography and computer graphics. A simple yet effective tone mapping method based on total variation is proposed so as to reproduce realistic scenes on low dynamic range (LDR) display devices. The structural component and texture component are obtained using total variation model in logarithmic domain. Then, the dynamic range of the structural component is compressed with an adaptive arcsine function. The texture component is processed by Taylor series. Finally, we adjust the saturation component using sigmoid function and restore the color information. Experimental results demonstrate that our method outperforms existing methods in terms of quality and speed.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.613-616
• /
• 2004

To find the best way to distinguish sand dunes from urban building and rural patches, textural analysis has been performed in Kimnyeong sand dune, Jeju. An aerial photo was re-sampled into one-meter. Homomorphic filters were applied to the original sub-scene and then high-pass filtered one. The entropy filtered one proves to be the best extraction method after high pass filtered-homomorphic filters in urban areas. The spectral values of sand dune area were similar to open land in rural area. In contrast, the texture values of sand dune area are more homogeneous than those of open land in rural area.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.371-377
• /
• 2017

General phantom for practical X-ray photography Practical phantom is an indispensable textbook for radiology, but it is difficult for existing commercially available phantom to be equipped with various kinds of phantom because it is an expensive import. Using 3D printing technology, I would like to make the general phantom for practical X-ray photography less expensive and easier. We would like to use a skeleton model that was produced based on CT image data using a 3D printer of FDM (Fused Deposition Modeling) method as a phantom for general X-ray imaging. 3D slicer 4.7.0 program is used to convert CT DICOM image data into STL file, convert it to G-code conversion process, output it to 3D printer, and create skeleton model. The phantom of the completed phantom was photographed by X - ray and CT, and compared with actual medical images and phantoms on the market, there was a detailed difference between actual medical images and bone density, but it could be utilized as a practical phantom. 3D phonemes that can be used for general X-ray practice can be manufactured at low cost by utilizing 3D printers which are low cost and distributed and free 3D slicer program for research. According to the future diversification and research of 3D printing technology, it will be possible to apply to various fields such as health education and medical service.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.41-51
• /
• 2015

Gosan Yoon, Sundo's Gumswae-dong Garden Heritage has been designated as a National Historical Site 432 including Hyunsan old fortress wall. The site requires maintenance planning. For the plan, it also requires the consideration of Gosan's written documents describing the garden heritage and the site survey with on-site inspections for authentic maintenance approaches. It should be based on the thorough comprehension of historical remains. The site is a traditional ancient garden, so its approaches should be different with a historic structure and building. For the planning, the study conducts the interview of residents and experts, literature review, the investigation of historical materials, site survey, and the analysis of aerial photography. The results are following:5) Firstly, the paper suggests three types of an excavation area selection: core, recommend and investigation. Secondly, of 22 landscapes named by Gosan, it has the plan of guidance facilities, vegetation maintenance, safety facilities, landscape maintenance as view points, pathway maintenance, deck, and halting place. Thirdly, it also suggests pathway plan for authentic garden promenade according to the literature of Gumswaedong-Gi, an old map and aerial photography(1967, 1976, 1990), and interviews with residents. Fourthly, it suggests vegetation refurbishment at the site to check erection time and to require a preservation plan. In a case of no historic remains part, it also has a plan of amenities for visitors and wetlands for biodiversity of ecology and landscape. Finally, although it requires excavation and more historical evidences for the Hyunsan fortress wall, it suggests a maintenance plan of Pyeonchuksseong and Hyeopchuksseong partially.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.635-646
• /
• 2010

This article focuses on Funology and a new classified application system based on concept of language and thought which are formed by body experience. It is defined by Funology Body as that. Funology Body is classifying and searching system which are consisted of a body, world (environment), and device tool. The body is sectioned by Brain, Eyes, Ears, Nose, Mouth, Hand, Torso, Feet, and Heart according as parts of the human body. This allows intuiting and experience searching as making classified system connected to the application relationship with concept of an each part of body. The Brain of the body is sub-classified by Book, Account, Business, Memory, Education, Search, and Aphorism to imply the application with thought. The Eyes take Video, Photography, and Broadcast for visibility. The Ears is categorized as Music, Instrument, Audio, and Radio for hearing. The Nose gets Perfume, Smell for olfactory sense. The Mouth is sectioned by Food, SNS, Chatting, Email, and Blog for eating and communication. The Hand sorts into Games, Kits, and Editing to handle, create, and play. The Torso is grouped by Health, Medical, Dance, Sport, Fashion, and Testyuorself related by protecting internal and meaning of the body core. The Feet is classified by Travel, Transportation, Map, and Outdoor for moving and concept of expanding the terrain. The Heart is consisted of Fear, Anger, Joy, Sadness, Acceptance, Disgust, Expectation, and Surprise for a human feeling. Beyond that, the World takes News, Time, Weather, Map, Fortune, and Shop, and Device tool gets Interface, Utilities. The Funology Body has a unique characteristic of giving intuitive and sensuous pleasure and reflection of users' attitude and taste for changing application flexibly.