• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1741-1743
• /
• 1996

This paper presents simulations of the pancake in the simplified 3D microwave oven. The results were compared with experimental data. For the comparison we used infrared photography of the heated pancake and electric field distribution obtained by simulation. Finite Element Method (FEM) using edge element is employed for the simulation. For solving the large sparse system parallelled QMR method was used.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.478-483
• /
• 2003

This paper describes spray characteristics of a swirl injector which is intended for use in a HCCI engine. Many optical diagnostics such as laser diffraction methods, and high speed camera photography are applied to measure the spray drop diameter and to investigate the spray development process. The effect of fuel properties on the spray characteristics was investigated using three different fuels because HCCI combustion is tolerant of the chemical composition of various fuels. From these results, the HCCI injector formed a hollow cone sheet spray rather than a liquid jet and the atomization efficiency is high for the low-pressure injector. The SMD of test injector was ranged from $15{\mu}m$ ${\mu}m$ We also found that the spray breakup characteristics were dependent on the fuel properties such as density, viscosity, and surface tension.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1995년도 제2회 KOSCI Workshop
• /
• pp.105-121
• /
• 1995

The objective of this study is to find out the design data for gas burner with an axal and radial type nozzles. The design parameters are chosen as the stabilizer type, the jet hole size of gas nozzle, the distance between gas nozzle and stabilizer, the size of stabilizer and the hole size of stabilizer, the stabilizer type with or without air swirler, the angle of swirler. For the experimental test combustor sizing ${\phi}1.3m{\times}L4.5m$ is designed and manufactured, in which the set up of power diagram, the exhaust gas analysis, blow-off test, the flame temperature and the direct photography are performed.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.83-88
• /
• 1999

In this paper resistance projection weldability of Zn coated steels with post treatment has been discussed. Projection welding was performed by a condenser discharge type power source which was equipped with welding parameter monitoring system. Mechanical test results indicated that the effect of post coatings on the projection front changed showing very small very small spattering at the weld strength was negligible. However, contamination rate of the block electrode varied depending on the post treatment coatings. Test results also showed that projection height before welding should be kept to be 80-100% of the specimen thickness as far as the surface quality was taken into consideration. Based on the high speed photography, discharge condition at the beginning stage of the welding process. It was considered that the spattering reduced the weld strength slightly at the optimum heat input range.

• 대한공간정보학회지
• /
• 제1권2호
• /
• pp.177-184
• /
• 1993

소규모 지역에 대한 대축척 정밀 지형정보를 경제적으로 얻기 위해 외부표정요소를 정확히 산출하고, 무선조종이 가능한 무인 비행선에 정오차 보정요소를 결정한 35mm 비측정용 카메라를 탑재하여 촬영하였다. 해석에 필요한 지상기준점은 GPS측량으로 상대적 위치를 결정하여 정확도 향상을 기하였다. 또한 해석도화기에 의해 대축척 지형도를 제작하여 정확도 검증을 함으로써 그 응용가능성을 제시하였다.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.236-238
• /
• 2007

[ 0-3PbTiO_3/P$ ](VDF/TrFE) nanocomposites thin films for passive pyroelectric infrared sensor have been fabricated by two-step spin coating technique. 65 wt% VDF and 35 wt% TrFE was formed to a P(VDF/TrFE) poder Nano size $PbTiO_3$ powder was used. 0-3 connectivity of $PbTiO_3$(VDF/TrFE) composites film is achieved and also observed by SEM photography successfully. The dielectric constant, and pyroelectric coefficient measured and compared with P (VDF/TrFE). A very low dielectric constant (13.48 at 1 kHz) and high enough pyroelectric coefficient (3.101 $nC/cm^2$.k at $50^{circ}C$) neasured. This nanocomposites can be used for a new pyroelectric infrared sensor for better performance.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.6-10
• /
• 2020

Unlike modern photography technology, in the early days, efforts to physically compose an image with a concept similar to the current photograph have not been popular or commercially successful. The limitation of the use of images as artistic media or recordings has reached the stage of introducing the technology of image analysis to automate the function that humans recognize and judge through vision. In addition, the accuracy of the image has exceeded the human visual ability, enabling the technology that enables the step of recognizing and informing the fact that the human is not aware of it. Based on such a base, the range that can be applied through the image data in the future era can be said to be unpredictable, and the technology that targets large scale image database instead of an image is also expanding the possibilities as a new application technology. In order to identify a particular image from a massive database, different methodologies have been introduced. In this paper, we discuss image identifier production methods based on multi-resolution pyramid.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.229-234
• /
• 2005

The dynamic crack growth in ductile steel is investigated by means of the impact loaded 3 point bending (3PB) specimens. Results from experiments and numerical simulations are compared to each other. A modified 3PB specimen designed with the reduced width at its ends has been developed in order to avoid the initial compressive loading of the crack tip and also to avoid the uncertain boundary conditions at the impact heads. Numerical simulations of the experiments are made by using a finite element method (FEM) code, ABAQUS. The high speed photography is used to obtain the crack growth and the data of the crack tip opening displacement (CTOD). The direct measurements of the relative rotations of two specimen halves are made by using the Moire interference pattern.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.31-35
• /
• 2019

Human beings have been fascinated by the applicability of the medium of photography since the device was first introduced in the thirteenth century to acquire images by attempting primitive and rudimentary approaches. In the 21st century, it has been developed as a wide range of technology that enables not only the application of artistic expression as a method of replacing the human-hand-painted screen but also the planar recording form in the format of video or image. It is more effective to use the information extracted from the image data rather than to use a randomly given file name in order to provide a variety of services in the offline or online system. When extracting an identifier from a region of an image, high cost cannot be avoided. This paper discusses the image entropy-based approach and proposes a linear methodology to measure the image entropy in an effort to devise a solution to this method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.997-999
• /
• 2003

The effects of JPEG2000 compression on automated DSM extraction by using the area-based matching are evaluated in this paper. The influences on DSM heights obtained via PCI Geomatics OrthoEngine module are investigated using a single stereo model of 1:5,000 scale aerial photography at image resolution of 20 ${\mu}$m. The experiment design of elevation errors are computed for a range of compression rates from 2:1 to about 100:1, and the DSM which generated from uncompressed image is used as ‘ground truth’ data for comparison. The experimental results show that the standard deviation ranged from 0.9m to 2.5m with the compression ratio from 2 to 100. It is also observed that there is no significant degradation on DSM accuracy up to the compression ratio of 33.