• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.321-327
• /
• 1996

Experiments were performed on the laminar premixed flame stabilized in a porous medium to know whether the flame downstream of the combustor exists or not. In previous theoretical studies, a stable flame has been predicted in the downstream region of the combustor, but it has never been observed in experiments. In this study, a stable downstream flame could be obtained for the lower burning velocity through circumferential heating by a blue flame positioned outside the periphery of the specially devised combustor. The existence of the stable downstream flame was confirmed by a direct photography of soot line, and temperature measurements. The effect of combustor diameter to flame stability was also considered. As the diameter of the combustor increases, the lean flammability limit was extended.

• 한국주거학회논문집
• /
• 제12권3호
• /
• pp.1-12
• /
• 2001

The purpose of this study was to investigate the outdoor space of the recent built apartment complex in Ulsan and to provide the basic information for planning and apartment outdoor space. Multiple methods were utilized such as questionnaire, observation, behavior-mapping, and photography. The sample consisted of 382 residents living in four apartment complex in Ulsan. data were analyzed by frequency and percentage using SPSS PC+. The observation was performed in seven outdoor space, i.e., green area, road area, exercise area, play area, parking area, and approach area. According to the findings of this study, residents did not actively involve in outdoor activities and seldom use the outdoor space. Various changes and erosions were observed as a trace, especially near fence and grass area because of unplanned location of entrances. Finally this study suggested several planning guidelines for outdoor space in apartment complex.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.933-942
• /
• 1992

본 연구에서는 이상류 동축 노즐의 미립화 기구를 규명하기 위한 기초단계로 20˚의 증류수를 사용하여 이상류 동축노즐의 평균액적 직경에 미치는 공급유량의 영 향을 직접사진 촬영법을 사용하여 규명하고자 한다.

• 한국실내디자인학회논문집
• /
• 제37호
• /
• pp.110-118
• /
• 2003

Computer simulation is one of the most useful techniques to predict daylighting performance and present visual image. In architectural and interior design practice, the Lightscape is commonly used often to produce persuasive images rather than physically accurate results. Therefore, this study is to validity the Lightscape as daylighting evaluation tool, in particularly performance and realistically visualization. For the purpose, an evaluation test model (12.0m$\times$7.2m$\times$3.0m) of side lighting window with lightshelf was selected. A 1:6 scale plywood physical model was made. Under clear sky condition, illuminance of 84 Interior point were measured. Lightscape was run on a 750 MHz Pentium PC running Windows 2000 under the same sky condition. And a photography image was compared to rendering image. The physical results of interior illuminance were within 8% between the scale model and Lightscape simulation. There were no differences between the photograph image and rendering image by Lightscape in the sight. Lightscape as visualization tool for daylighting performance was validated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.140-143
• /
• 2000

The primary function of ZnO lightning arrester is to protect transmission and distribution equipment from overvoltages and to absorb electrical energy resulting from lightning or switching surges and form temporary overvoltage. However, ZnO lightning arrester are known to exhibit an increases in resistive current with time, the rate of increase being exacerbated with increasing applied voltage and ambient temperature. So, it is important to the leakage current measurement of ZnO lightning arrester. In addition, since the resistive leakage current caused by deterioration of ZnO lightning arrester mainly caused an increase of the third harmonic component, thereby it is possible the arrester degradation diagnosis by measuring the third harmonic component in the total leakage current. The leakage current and third harmonic component are measured and used to investigate the degradation diagnosis of ZnO element of arrester. Also the SEM photography is used to investigate the change of crystal structure of ZnO element with degradation.

• 한국응용과학기술학회지
• /
• 제18권2호
• /
• pp.136-141
• /
• 2001

Naphthothiazolo carbocyanine is of industrial importance as red-sensitizing dye in the spectral sensitization of emulsion microcrystals in negative film-making. In this study, red-sensitizing dye was prepared by the reaction of 2-methyl-3-sulfopropyl-4,5-naphthothiazolium(inner salt) with triethyl orthoacetate in the presence of triethylamine. The product was identified by using various analytical tools such as Elemental analyzer, IR spectrophotometer, UV-Vis spectrophotometer, Mass spectrometer, $^{1}H-NMR$ spectrometer, TGA and DSC. The maximum absorption peak in methanol solvent was 573nm. Therefore, it was concluded that naphthothiazolo carbocyanine dye can be used as red0sensitizing dye for the spectral sensitization of photographic emulsion.

• 대한원격탐사학회지
• /
• 제23권3호
• /
• pp.221-227
• /
• 2007

We present an analysis of urban development and growth with reconnaissance satellite photographs of Columbus metropolitan area acquired by the Corona program in 1965. A two-dimensional polynomial linear transformation was used to rectify the photos against United State Geological Survey (USGS) Large-scale Digital Line Graph (DLG) data georeferenced to Universal Transverse Mercator (UTM) coordinates. The boundaries of the Columbus metropolitan area were extracted from the rectified Corona image mosaic using a Bayesian approach to image segmentation. The inferred 1965 urban boundaries were compared with 1976 USGS Land Use and Land Cover (LULC) data and boundaries derived from 1988 and 1994 Landsat TM images. The urban area in and around Columbus approximately doubled from 1965 to 1994 (${\sim}110%$) along with population growth from 1960 to 1998 (${\sim}50%$). Most of the urban expansion results from development of residential units.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.1-5
• /
• 2008

An experimental study was performed to develop the rotational fuel injection system of the micro turbojet engine. In this system, fuel is sprayed by centrifugal forces of engine shaft. The test rig was designed and manufactured to get droplet information on combustion space. This experimental apparatus consist of a high speed rotational device(Air-Spindle), fuel feeder, rotational fuel injector and acrylic case. To understand spray characteristics, spray droplet size, velocity and distribution were measured by PDPA (Phase Doppler Particle Analyzer) and spray was visualized by using Nd-Yag laser-based flash photography. From the test results, the length of liquid column from injection orifice is controlled by the rotational speeds and Sauter Mean Diameter(SMD) is decreased with rotational speed. Also, Sauter Mean Diameter is increased as increasing mass flow rate at same rotational speeds.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.171-174
• /
• 2008

소형 회전연료 분사장치의 분열과정 특성을 연구하기 위한 실험적 연구를 수행하였다. 이러한 분열과정의 특성을 이해하기 위해 PDPA(Phase Doppler Particle Analyzer)시스템을 사용하여 분무입자의 크기와 속도를 측정하였다. 또한 Nd-Yag Laser를 광원으로 사용하여 분무를 가시화하였다. 실험결과 Injection Orifice로부터 생성된 액주는 회전수에 의해 지배되고, SMD(Sauter Mean Diameter)와 분무특성은 Injection Orifice의 직경에 큰 영향을 받는다는 것을 알 수 있었다.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.90-100
• /
• 1997

Sppur gear trains are used widely in high precision machines because gear trains have an advantage of exact transmission of angular velocity. Especially, gear trains are used in high quali8ty photocopying and photography OA machines. In general, gears have errors in manufacturing and assembling process and the errors are limited by tolerances. As the result, the tolerances cause the performance error. Therfore, it is important to predict transmission error caused by the tolerances for the tolerance design. Earlier tolerance design methods use mainly experimental and geometrical techniques. In this paper, a method for gear train analysis with tolerance is proposed. Because the method uses dynamic contacts, it is possible to consider irregularities and assemble errors of gears. In addition, the method can predit dynamic loads on the teeth of gears.