• Nuclear Engineering and Technology
• /
• v.16 no.2
• /
• pp.89-96
• /
• 1984

A toroidal-field (TF) coil with a pure tension D-shape curve is designed for the confinement of high-temperature plasmas in the SNUT-79, which is a tokamak being built at Seoul National University. A toroidal assembly of 16 D-shape TF coils is designed to produce the magnetic field of up to 3T, of which ripples appear to be below 4% of the average toroidal field in the plasma region. Exact positions and currents in six equilibrium coils distributed symmetrically in the z=0 plane are found by the solution of a set of linear equations which is transformed from a Fredholm integral equation of the first kind. The decay indices resulted from equilibrium field indicate that the stability condition for vertical and horizontal displacements is satisfied.

• Molecules and Cells
• /
• v.43 no.11
• /
• pp.899-908
• /
• 2020

Intrinsically disordered proteins or regions (IDPs or IDRs) are widespread in the eukaryotic proteome. Although lacking stable three-dimensional structures in the free forms, IDRs perform critical functions in various cellular processes. Accordingly, mutations and altered expression of IDRs are associated with many pathological conditions. Hence, it is of great importance to understand at the molecular level how IDRs interact with their binding partners. In particular, discovering the unique interaction features of IDRs originating from their dynamic nature may reveal uncharted regulatory mechanisms of specific biological processes. Here we discuss the mechanisms of the macromolecular interactions mediated by IDRs and present the relevant cellular processes including transcription, cell cycle progression, signaling, and nucleocytoplasmic transport. Of special interest is the multivalent binding nature of IDRs driving assembly of multicomponent macromolecular complexes. Integrating the previous theoretical and experimental investigations, we suggest that such IDR-driven multiprotein complexes can function as versatile allosteric switches to process diverse cellular signals. Finally, we discuss the future challenges and potential medical applications of the IDR research.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1907-1916
• /
• 2020

In this work, the depletion capability implemented in Monte Carlo code MCS is investigated to predict the isotopic compositions of spent nuclear fuel (SNF). By comparison of MCS calculation results to post irradiation examination (PIE) data obtained from one pressurized water reactor (PWR), the validation of this capability is conducted. The depletion analysis is performed with the ENDF/B-VII.1 library and a fuel assembly model. The transmutation equation is solved by the Chebyshev Rational Approximation Method (CRAM) with a depletion chain of 3820 isotopes. 18 actinides and 19 fission products are analyzed in 14 SNF samples. The effect of statistical uncertainties on the calculated number densities is discussed. On average, most of the actinides and fission products analyzed are predicted within ±6% of the experiment. MCS depletion results are also compared to other depletion codes based on publicly reported information in literature. The code-to-code analysis shows comparable accuracy. Overall, it is demonstrated that the depletion capability in MCS can be reliably applied in the prediction of SNF isotopic inventory.

• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.527-534
• /
• 2006

Modern passenger cars with diesel engines are equipped with DOC(diesel oxidation catalyst) for the purpose of reducing HC and CO in the exhaust stream. Cold start exhaust emissions pose troubles here as on gasoline engine vehicles. As a result, some of the diesel passenger cars roll off todays the assembly lines with WCC(warm-up catalytic converter). Oxidation characteristics of the particulates in WCC is analyzed in this study by EEPS(engine exhaust particulate size spectrometer). The maximum number of PM is found to come out of WCC in sizes near 10nm when an HSDI diesel engine is operated under the conditions of high speed and medium to heavy load. When the temperature of the WCC exceeds $300^{\circ}C$, the number of PM smaller than 30 nm in diameter sharply increases upon passing through the WCC. Total mass of emitted PM gets reduced downstream of the WCC under low speed and light load conditions due to adsorption of PM onto the catalyst. Under conditions of high speed and medium to heavy load, the relatively large PM shrink or break into fine particles during oxidation process within the WCC, which results in more mass fraction of fine particles downstream of the WCC.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.968-975
• /
• 2005

The shearing process for the sheet metal is normally used in the precision elements such as semi-conductor components. In these precision elements, the burr formation brings a bad effect on the system assembly and demands the additional de-burring process, so this imposes high cost on manufacturing. In this paper, we have developed the in-situ auto-aligning precision meso-punching system to investigate the burr formation mechanism and ultimately minimize burr. Firstly, we introduced the punch-die contact sensing method to align the punch and the die at initial state prior to the punching process. Secondly, by using the low-price semi-con­ductor laser, burr formed on the edges is measured intermittently during the punching process. We could, finally, make burr on the sheet metal uniformized and minimized by controlling of the precision X - Y table, $1\;{\mu}m$ resolution, and measuring burr height by semiconductor laser. Experimental results show the validity of our system for pursuing the burr-free punched elements.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2209-2215
• /
• 2004

In the present research work, an automated machine vision system and a new algorithm to interpret the inspection data has been developed. In the past, the control of tolerance of front-chassis-module was done manually. In the present work a machine vision system and required algorithm was developed to carryout dimensional evaluation automatically. The present system is used to verify whether the automobile front-chassis-module is within the tolerance limit or not. The directional ability parameters related with front-chassis-module such as camber, caster, toe and king-pin angle are also determined using the present algorithm. The above mentioned parameters are evaluated by the pose of interlinks in the assembly of an automobile front-chassis-module. The location of ball-joint center is important factor to determine these parameters. A method to determine the location of ball-joint center using geometric features is also suggested in this paper. In the present work a 3-D best fitting method is used for determining the relationship between nominal design coordinate system and the corresponding feature coordinate system.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.116-123
• /
• 2010

Rapid detection of foodborne pathogens has been a major challenge for the food industry. Salmonella contamination is well known in all foods including pasteurised milk. The possibility of specific detection of Salmonella Enteritidis by surface plasmon resonance (SPR) biosensor was explored using a commercially available portable SPR sensor. Self assembly technique was adopted to immobilize anti-Salmonella antibodies on the gold sensing surface of the SPR sensor. The concentration of polyclonal antibody for use in the SPR biosensor was chosen to 1.0 mg/mL. Experiments were conducted at near real-time with results obtained for one SPR biosensor assay within 1 hour. The limit of detection for Salmonella Enteritidis was determined to be $10^6$ CFU/mL in both PBS buffer and milk samples. The assay sensitivity was not significantly affected by milk matrix. Our results showed that it would be possible for employing the SPR biosensor to detect Salmonella Enteritidis in near real-time.

• Molecules and Cells
• /
• v.28 no.1
• /
• pp.31-36
• /
• 2009

Centrobin/Nip2 was initially identified as a centrosome protein that is critical for centrosome duplication and spindle assembly. In the present study, we determined the expression and subcellular localization of centrobin in selected mouse tissues. Immunoblot analysis revealed that the centrobin-specific band of 100 kDa was detected in all tissues tested but most abundantly in the thymus, spleen and testis. In the testis, centrobin was localized at the centrosomes of spermatocytes and early round spermatids, but no specific signal was detected in late round spermatids and elongated spermatids. Our results also revealed that the centrosome duplication occurs at interphase of the second meiotic division of the mouse male germ cells. The centrobin protein was more abundant in the mitotically active ovarian follicular cells and thymic cortex cells than in non-proliferating corpus luteal cells and thymic medullary cells. The expression pattern of centrobin suggests that the biological functions of centrobin are related to cell proliferation. Consistent with the proposal, we observed reduction of the centrobin levels when NIH3T3 became quiescent in the serum-starved culture conditions. However, a residual amount of centrobin was also detected at the centrosomes of the resting cells, suggesting its role for maintaining integrity of the centrosome, especially of the daughter centriole in the cells.

• Journal of Powder Materials
• /
• v.28 no.6
• /
• pp.509-517
• /
• 2021

Smart materials capable of changing their characteristics in response to stimuli such as light, heat, pH, and electric and magnetic fields are promising for application to flexible electronics, soft robotics, and biomedicine. Compared with conventional rigid materials, these materials are typically composed of soft materials that improve the biocompatibility and allow for large and dynamic deformations in response to external environmental stimuli. Among them, smart magnetic materials are attracting immense attention owing to their fast response, remote actuation, and wide penetration range under various conditions. In this review, we report the material design and fabrication of smart magnetic materials. Furthermore, we focus on recent advances in their typical applications, namely, soft magnetic actuators, sensors for self-assembly, object manipulation, shape transformation, multimodal robot actuation, and tactile sensing.

• Journal of People, Plants, and Environment
• /
• v.23 no.2
• /
• pp.125-138
• /
• 2020

The aim of this study was to review previous literature to determine the effects of nature-based program for workers. This systematic review was conducted in accordance with National Evidence-based Healthcare Collaborating Agency's guidance for undertaking systematic reviews for intervention. Literature search was performed using National Assembly Digital Library, Korean Studies Information Service System, and Korea Education & Research Information Service for literature published until March 2019. The participants were full-time workers, and intervention of nature-based programs was conducted in the outdoor, indoor, and indirect nature contact exposures, with comparators in the control group who did not receive the treatment. The results showed that the programs were effective in physical, psychological, and social health. The methodological quality of randomized controlled trials (RCT) was assessed using the Cochrane Risk of Bias(RoB) tool, while non-randomized controlled trials (N-RCT) were assessed using the Cochrane Risk of bias assessment tool for non-randomized studuies (RoBANS). A total of 16 studies were selected for assessment: two RCTs, 10 N-RCTs, and four one-group pretest-posttest designs. Most interventions were provided at the workplace and in the community. There were many kinds of nature-based interventions, and forest therapy and horticultural therapy programs were most common. Various interventions for workers effectively improved job stress, depression, serum cortisol and stress-response. However, the included studies lacked methodological rigor. Future research is needed to evaluate the long-term effectiveness of nature-based programs for workers using rigorous research designs.