• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.63.2-63.2
• /
• 2013

We have investigated the EUV coronal jets observed by Solar Dynamic Observatory (SDO) / Atmospheric Imaging Assembly (AIA). From the Heliophysics Events Knowledgebase (HEK), we consider all recorded 40 EUV jets in $171{\AA}$ from May 2010 to July 2011 and use 19 jets whose location can be clearly identified, excluding limb events because of the ambiguity of their positions. According to the positions of their roots, these coronal jets are classified into two types: bright point jet (BPJ, 9 jets) and active region boundary jet (ABJ, 10 jets). BPJs are located at the top of bright points and ABJs at the boundaries of active regions. There are significant differences in speed and size between two types. Here the speed and size of a jet are assumed to be its maximum values in the case that the jet has several ejections. The average speed and size of 9 BPJs are about 110 km/s and 69,000km, respectively. The average speed and size of 10 ABJs are about 660 km/s and 194,000 km, respectively. The speed distribution of ABJs has two peaks at about 270 km/s and 1700 km/s. It is very interesting to note that three ABJs have very high speeds larger than 1600 km/s and they are all composed of a group of recurrent jets with low and high speed at the same location. In addition, we are investigating these events in other wavelengths and compare their characteristics.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.74.1-74.1
• /
• 2014

We have investigated a supra-arcade structure associated with an M1.6 flare, which occurred on the south-east limb in the 4th of November 2010. It is ob- served in extreme ultraviolet (EUV) with the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO), microwaves at 17 and 34 GHz with the Nobeyama Radioheliograph (NoRH), and soft X-rays of 8-20 keV with the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). Interestingly, we found exceptional properties of the supra-arcade thermal plasma from the AIA 131 A and the NoRH: 1) plasma upflows along large coronal loops and 2) enhancing microwave emission. RHESSI detected two soft X-ray sources, a broad one in the middle of supra-arcade structure and a bright one just above the flare-arcade. We estimated the number density and thermal energy for these two source regions during the decay phase of the flare. In the supra-arcade source, we found that there were increases of the thermal energy and the density at the early and the last stages, respectively. On the contrary, the density and thermal energy of the source on the top of the flare-arcade decreases throughout. The observed upflows imply that there is continuous energy supply into the supra- arcade structure from below during the decay phase of the flare. It is hard to be explained by the standard flare model in which the energy release site is located high in corona. Thus, we suggest that the potential candidate as the energy source for the hot supra-arcade structure is the flare-arcade which has exhibited a predominant emission throughout.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.611-618
• /
• 2007

We demonstrate the sol-gel coating technique of colloidal clusters for producing hollow micro-particles with complex morphologies. Cross-linked amidine polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion copolymerization of styrene and divinylbenzene. The amidine PS particles were self-organized inside toluene-in-water emulsion droplets to produce large quantities of colloidally stable clusters. These clusters were coated with thin silica shell by sol-gel reaction of tetraethylorthosilicate (TEOS) and ammonia, and the organic polystyrene cores were removed by calcination at high temperature to generate nonspherical hollow micro-particles with complex morphologies. This process can be used to prepare hollow particles with shapes such as doublets, tetrahedra, icosahedra, and others.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.101-121
• /
• 2010

Domestic trucking transportation market does not have only the poor business environment but also the serious defects on the transportation trading structure. It makes weaken the competitiveness of trucking industry and hinders the development of trucking industry. The problems of trucking industry such as the recession of the Korean economy and decrease of the trucking charge cause the truck drivers suffer. Korean government and national assembly try to change the law of truck transportation business. The suggested law includes the obligation of trucking information networking system and it can make the transportation business structures more efficiently. This article deals with the strategies for the establishment of trucking transportation networking system and examines the cost-benefit analysis assuming the four demand senario. The results suggest the establishment of the information system not based on the individual trucking industry but on the joint industry at the level of the local area. This article also suggests that the information system has a positive financial feasibility.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.2005-2011
• /
• 2012

Nopp140 is a highly phosphorylated protein that resides in the nucleolus of mammalian cell and is involved in the biogenesis of the nucleolus. It interacts with a variety of proteins related to the synthesis and assembly of the ribosome. It also can bind to a ubiquitous protein kinase CK2 that mediates cell growth and prevents apoptosis. We found that Nopp140 is an intrinsically unfolded protein (IUP) lacking stable secondary structures over its entire sequence of 709 residues. We discovered that mitoxantrone, an anticancer agent, was able to enhance the interaction between Nopp140 and CK2 and maintain suppressed activity of CK2. Surface plasma resonance studies on different domains of Nopp140 show that the C-terminal region of Nopp140 is responsible for binding with mitoxantrone. Our results present an interesting example where a small chemical compound binds to an intrinsically unfolded protein (IUP) and enhances protein-protein interactions.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.209.2-209.2
• /
• 2012

UFFO Burst Alert & Trigger telescope (UBAT) is one of major instruments of UFFO-Pathfinder. The UBAT aims at 10 arcmin resolution localization of Gamma Ray Bursts with X-ray coded mask technique. It has $400mm{\times}400mm$ coded mask aperture, hopper, shielding and detector module with effective area of $191cm^2$. The detector module consists of an assembly of 36 64-ch MAPMTs and $25mm{\times}25mm$ pixellated YSO crystal array, and associated analog and digital electronics of about 2500 channels. We performed a vibration test using a dummy MAPMT with the detector module structure to measure the indused stress applied onto the MAPMT. We designed a sub-structure on the detector module to avoid the resonance that would otherwise deforms the detector module structure. A finite element analysis confirms the reduction of the load acceleration down to 12g. The experimental results are to be reported. Consequently, it proves that the MAPMT arrays of the flight UBAT detector module structure would survive in the space launch environment.

• Journal of Home Health Care Nursing
• /
• v.21 no.1
• /
• pp.14-25
• /
• 2014

Purpose: The purpose of this study was to analyze key performance indicators using a balanced scorecard in the nursing department of hospitals, and to find useful suggestions for future research. Methods: Before starting the literature search clear inclusion and exclusion criteria were determined. After that, were viewed 41 studies from the RISS, KISS, National assembly library, and NDSLDB. Data were collected on October 17, 2013. Researchers developed an analytic framework for the literature review using a balanced score card development process and construction steps of previous studies. This framework had 10 steps related to the balanced score card development process. Results: A total of 10 studies met the inclusion and exclusion criteria. We identified 234 key performance indicators for the nursing department. The average number was 6.6 in finance perspective, 8.6 in perspective, 11.9 in internal process perspective, and 6.2 in learning and growth perspective. We found that 173 indicators had been cited only once. 61 indicators were cited over twice. Further, 8 indicators employed different perspectives on different studies. Conclusion: The results of the present study summarize useful information on recent trends on key performance indicators using a balanced score card in the nursing department of hospitals. These results will help develop key performance indicators and provide directions for future research.

• Journal of Applied Biological Chemistry
• /
• v.64 no.3
• /
• pp.225-236
• /
• 2021

The epipyrone (EPN) biosynthetic gene cluster of Epicoccum nigrum is composed of epnC, epnB, and epnA, which encode cytochrome P450 oxidase, glycosyltransferase, and highly reducing polyketide synthase, respectively. Gene inactivation mutants for epnA, epnB, and epnC were previously generated, and it was found that all of them were incapable of producing EPN and any of its related compounds. It was also reported that epnB inactivation abolished epnA transcription, generating ΔepnAB. This study shows that the introduction of native epnC readily restored EPN production in ΔepnC, suggesting that epnC is essential for polyketide release from EpnA and implies that EpnC works during the polyketide chain assembly of EpnA. Introduction of epnC promoter-epnA restored EPN production in ΔepnA. The ΔepnB genotype was prepared by introducing the epnA expression vector into ΔepnAB, and it was found that the resulting recombinant strain did not produce any EPN-related compounds. A canonical epnB inactivation strain was also generated by deleting its 5'-end. At the deletion point, an Aspergllus nidulans gpdA promoter was inserted to ensure the transcription of epnA, which is located downstream of epnB. Examination of the metabolite profile of the resulting ΔepnB mutant via LC-mass spectrometry verified that no EPN-related compound was produced in this strain. This substantiates that C-glycosylation by EpnB is a prerequisite for the release of EpnA-tethered product. In conclusion, it is proposed that cytochrome P450 oxidase and glycosyltransferase work in concert with polyketide synthase to generate EPN without the occurrence of any free intermediates.

• The Korean Journal of Archival Studies
• /
• no.68
• /
• pp.243-279
• /
• 2021

Rep. Roh Hoe-chan is a representative politician in Korean progressive politics. From the labor movement to the workers' political organization movement, they devoted themselves to the movement to build a progressive party. As a member of the 17th, 19th, and 20th National Assembly, he carried out legislative activities. The record he left is the record of the political power of workers, the record of the progressive party, and the record of a politician who suffers and practices. Also, as the son of a displaced person, as a student activist suffering from the restoration period, it is also a record of a human being of cultural literacy who played the cello. Archivist's basic research is expected to play a role in creating a virtuous cycle of archive management by structuring the archive and presenting various access points to various users, allowing more diverse research and use in the future.

• Korean Journal of Metals and Materials
• /
• v.46 no.8
• /
• pp.495-505
• /
• 2008

With the high proportion of zinc coated steels in body-in-white assembly, newly developed surface roughness textured galvannealed steel sheets have been introduced. In this study, zinc coated and surface roughness textured steel sheets were welded by resistance spot welding to investigate its weldability including electrode wear test. Based on the results of tensile-shear test, nugget diameter changes, and electrode tip growth test, it was clear that both surface roughness textured steels (GA-T and GA-E) showed good weldability. Also, there was no large difference in weldability and electrode wear behavior between GA-T and GA-E steels which have different surface roughness morphology. An analysis of electrode degradation showed Fe and Zn penetration through the electrode tip surface at 2400 welds reached $55{\sim}60{\mu}m$ and $75{\sim}80{\mu}m$, respectively. Therefore, there is no significant effect of surface roughness morphology on spot weldability of surface roughness textured galvannealed steel sheets. However, slight difference in thickness of alloying layers existing on electrode tip was found between GA-T and GA-E steels.