• Journal of Korea Technology Innovation Society
• /
• v.17 no.1
• /
• pp.146-173
• /
• 2014

Extant studies have explained that firm's innovations including technological product and process innovations contribute to its competitive advantage and growth, thereby supporting competitiveness and growth of industry. These studies, however, have focused mainly on the role and effect of technological change that is primarily measured by the patent numbers and R&D intensity. Aside from these traditional streams, there has been growing interest on the impact by various dimensions of innovation including non-technological innovations. Apart from the discussions on the dimensions and scope of innovation, stages or processes of innovation also have been studied. Extant studies on innovation process model, however, has limited its interests in the structure of the transformation of knowledge. This study have established a comprehensive model embracing operational and financial performance to investigate the causal paths between innovation and firm performance. Using multi-level generalized linear model with path analysis, this study have found results as follows: First, the processes from innovative activities to innovation output and outcomes including operational and financial performance at firm level were verified. Secondly, the influence of innovation decreases gradually as the distance away from the direct outputs of the innovation increase in the direction of financial outcomes. Third, the effect of innovation on the sales growth rate is higher for small businesses than for medium-sized businesses. The effect of innovation on the profit rate, however, is significant only for medium-sized businesses. For large businesses, innovation has no positive significant impact on any financial performance at all. Fourth, Fourth, the appropriability of innovation has positive impacts on innovative performance, patent applications, and operational performance.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.19-25
• /
• 2009

Molybdenite concentrate ($MoS_2$) is the major mineral for the molybdenum industry, of which the industrial processing is first converted to technical grade molybdenum trioxide ($MoO_3$) by its oxidative roasting and purification, used as a raw material for manufacturing several molybdenum compounds. In the present work, detailed experimental results for the oxidative roasting of low grade Mongolian molybdenite concentrate are presented. The experiments were carried out in the temperature range of 793 to 823 K under an oxygen partial pressure range of 0.08 atm to 0.21 atm by using a thermogravimetric analysis technique. The molybdenite concentrate was an average particle size of $67\;{\mu}m$. In the oxidative roasting of low grade Mongolian molybdenite concentrate, more than 95% of molybdenite was converted to molybdenum trioxide in 60 min. at 828 K. The lander equation was found to be useful in describing the rates of the oxidative roasting and the reaction order with respect to oxygen concentration in a gaseous mixture with nitrogen was 0.11 order.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• International Commerce and Information Review
• /
• v.16 no.5
• /
• pp.151-178
• /
• 2014

The objective of the present case study is to analysis how effectively Hilti, which is a former family firm owned and managed by a family in Liechtenstein as a tiny european country, a land sandwiched between Switzerland and Austria, has made a global market success. Liechtenstein has $160km^2$ land and about 36,000 residents. Despite its small size of country, however, Hilti Corporation doesn't view its location as a liability in its business strategy. Hilti is a global leading provider of professional power tools in building, mining, civil engineering etc. Also, Hilti is a firm with a clear vision to become the leading industry partner for construction professionals and building installations through customer focus, high quality equipment, and tools and systems specially designed for specific jobs. This study considered Hilti as a good case, which verifies that born-conditions, endogenous factors according to Michael Porters diamond model does not decisive role more for international competitiveness of firms. Lessons from Hilti are that in order to obtain and sustain the global competitiveness of small and medium-sized firms in Korean manufacturing sector under high production cost, they have to do actively innovative. Also they can give to customers newer and higher customer-values than competitors in abroad give. The case summarizes that the strategy of Hilti for the global market success is comprised of several factors: Technological and organizational innovation, and a clear customer-value oriented business strategy and its implementation. Innovation and its integration into marketing for the customers value creation is central to Hilti's Success. The present case study is expected to provide insights and implication for many firms in Korea that are seeking to secure global presence and market success.

• Culinary science and hospitality research
• /
• v.17 no.4
• /
• pp.59-73
• /
• 2011

The purpose of this study is to establish a marketing strategy for the makgeolli manufacturing industry. We fractionized cousumer types depending on motives for purchase of customers who had bought makeolli or drunk it for the last six months. We also examined the relationship between makgeolli selection attributes and customer satisfaction by the cousumer types. SPSS 15.0 statistical package was used to process data. Frequency analysis, factor analysis, a reliability test, K-means cluster analysis, one-way ANOVA, and multiple regression were executed. As a result, the motives to purchase and drink were divided into four factors - marketing, effect on health, self-desires, outside environment; consumers into three types - dependent type, loving type, indifferent type; makgeolli selection attributes into five factors - health characteristics, visual elements, brand characteristics, drinking characteristics, purchase characteristics. It was shown that the makgeolli loving type considered all the makgeolli selection attributes as most important; the dependent type considered the health characteristics and visual elements as less important than the loving type did. The indifferent type considered all the makgeolli selection attributes as less important compared with the other types. Among the makgeolli selection attributes, drinking characteristics and the purchase characteristics had effects on customer satisfaction.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.254-261
• /
• 2014

In order to optimize process conditions for manufacturing retorted Kimchi soup by using stationary and rotary types systems were applied for sterilization process. For investigating the differences in heat penetration characteristics during sterilization, Kimchi soup was packed into retort pouches, and sterility ($F_0$ value) at various positions in the product was measured through a wireless $F_0$ sensor. Heat penetration characteristics were significantly affected by sterilization method. From data analysis, optimum ranges of sterilization temperature and time was determined to be $120.7^{\circ}C$, 13 min for rotary type and $120.7^{\circ}C$, 20 min for stationary type. At those conditions, they had similar sterility ($F_0$ value). The results showed that rotation provides faster heat penetration and more uniform sterility than various positions of the product. These results derived a lot of advantages from related industry. For instance, many of the more viscous semi-liquid products and heat sensitive natural products could be sterilized in the lager pouch sizes without overcooking or scorching. Hence, current study suggests that rotary type retort would make it possible not only to reduce processing times as 35~45%, but also to improve the quality of product as overall taste, flavor, color, and texture with significant difference (p<0.05).

• Molecular & Cellular Toxicology
• /
• v.2 no.2
• /
• pp.134-140
• /
• 2006

Because shipyard workers are involved with various manufacturing process in shipyard industry, and they are exposed to many kinds of hazardous materials. Especially, painting workers were exposed polycyclic aromatic hydrocarbons (PAH). This study was conducted to assess the exposure status of PAH based on job-exposure matrix. We investigated the effect of genetic polymorphism of xenobiotic metabolism enzymes involved in PAH metabolism on levels of urinary metabolite. A total of 93 shipbuilding workers were recruited in this study. Questionnaire variables were age, sex, use of personal protective equipment, smoking, drinking, and work duration. The urinary metabolite was collected in the afternoon and corrected by urinary creatinine concentration. The genotypes of CYP1A1, CYP2E1, GSTM1, GSTT1 and UGT1A6 were investigated by using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) methods with DNA extracted from venous blood. Urinary 1-OHP levels were significantly higher in direct exposured group (spray and touch-up) than indirect exposed group. Urinary 1-OHP, concentration of the high exposure with wild type of UGT1A6 was significantlyhigher than that of the high exposure with other UGT1A6 genotype. In multiple regression analysis of urinary 1-OHP, the regression coefficient of job grade was statistically significant (p<0.05) and UGT1A6 was not significant but a trend (p<0.1). The grade of exposure affected urinary PAH concentration was statistically significant. But genetic polymorphism of xenobiotics metabolism enzymes was not statistically significant. Further investigation of genetic polymorphism with large sample size is needed.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.499-506
• /
• 2013

As the usuage of tempered glass for touch panel increased rapidly with the development of industry, the amount of UV curable coating solution used to protect glass surfaces during a tempered glass manufacturing process increased as well. The UV curable coating has advantages compared to thermal curing such as shortened curing time and non-solvent. Appropriated polymer and monomer were used as an acid polymer to grant an alkali peeling ability. The monomers were 2-hydroxyl methylacrylate, 1,6-hexanediol diacrylate and dipentaerythritol hexaacrylate which have acryl groups of 1, 2, and 6, respectively. The combination of three different types of photoinhibitors were used and bisphenol A epoxy diacrylate was used as an oligomer. In this study, experiments were carried out by controlling the amount of photoinitiator, oligomer, and additive while maintaining the constant content of the acid polymer and the acrylic monomer. The changes in physical properties according to the additive content were investigated. It was found that the combination of photoinitiators was necessary to achieve the hardness above 4H and it was possible to control the delamination type of the coating film from a sheet to pieces by the addition of TPO as an initiator. The increase in oligomer contents increased the hardness and adhesiveness alongside dissection time. Talc content of 20 wt% showed the best results.

• Journal of Animal Science and Technology
• /
• v.54 no.1
• /
• pp.59-63
• /
• 2012

Bovine serum contains various nutrients and growth factors that can be potentially used in biological experiments, drug manufacturing process and food industry. However, almost all the bovine blood has been wasted during slaughter process in Korea, thus there is a high demand for alternative uses of the wasted sera. In order to produce high quality and safe sera, it is necessary to screen zoonotic pathogens as well as other microbial contaminants to prevent any downstream contamination. The present research has been undertaken to assess biological safety of Hanwoo sera by determining microbiological contamination during slaughtering and handling processes. Serological tests have been performed to detect bacteria, mycoplasma and virus contamination in total of 52 Hanwoo sera. No sera were found to be contaminated with mycoplasma or virus, but only two sera were found to be contaminated with Bacillus thuringiensis. The present result shows that Hanwoo sera obtained from slaughtering process are biologically safe and have potentials to be developed as a biological reagent. Moreover, the methods employed in our study may provide basic standard for microbiological screening methods once wasted Hanwoo sera gain industrial values.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.138-148
• /
• 2013

Purpose: Determining an appropriate path is a top priority in order for a robot to maneuver in a dynamically efficient way especially in a pick-and-place task. In a non-standardized work environment, current robot arm executes its motion based on the kinematic displacements of joint variables, though resulting motion is not dynamically optimal. In this research we suggest analyzing and applying motion patterns of the human arm as an alternative to perform near optimum motion trajectory for arbitrary pick-and-place tasks. Methods: Since the motion of a human arm is very complicated and diverse, it was simplified into two links: one from the shoulder to the elbow, and the other from the elbow to the hand. Motion patterns were then divided into horizontal and vertical components and further analyzed using kinematic and dynamic methods. The kinematic analysis was performed based on the D-H parameters and the dynamic analysis was carried out to calculate various parameters such as velocity, acceleration, torque, and energy using the Newton-Euler equation of motion and Lagrange's equation. In an attempt to assess the efficacy of the analyzed human motion pattern it was compared to the virtual motion pattern created by the joint interpolation method. Results: To demonstrate the efficacy of the human arm motion mechanical and dynamical analyses were performed, followed by the comparison with the virtual robot motion path that was created by the joint interpolation method. Consequently, the human arm was observed to be in motion while the elbow was bent. In return this contributed to the increase of the manipulability and decrease of gravity and torque being exerted on the elbow. In addition, the energy required for the motion decreased. Such phenomenon was more apparent under vertical motion than horizontal motion patterns, and in shorter paths than in longer ones. Thus, one can minimize the abrasion of joints by lowering the stress applied to the bones, muscles, and joints. From the perspectives of energy and durability, the robot arm will be able to utilize its motor most effectively by adopting the motion pattern of human arm. Conclusions: By applying the motion pattern of human arm to the robot arm motion, increase in efficiency and durability is expected, which will eventually produce robots capable of moving in an energy-efficient manner.