• Journal of Christian Education in Korea
• /
• v.73
• /
• pp.73-91
• /
• 2023

This study aims to provide basic data for revitalizing creativity research related to early childhood teachers by analyzing creativity research related to early childhood teachers. For this study, 103 master's and doctoral dissertations in Korea, which were searched through the National Assembly Library and the Research Information Sharing Service (RISS), were selected under the themes of 'early childhood teacher', 'creativity', and 'creativity research trends'. The frequency and percentage were calculated by analyzing creativity research related to early childhood teachers with five criteria: research period, research content, research method, research subject, and creativity factor. As a result of the study, first, as for the trends of creativity research related to early childhood teachers, 91 master's theses (88.3%) and 12 doctoral theses (11.7%) were conducted from 1991 to 2022, focusing on master's theses. Second, trends by research content were found in 20 basic studies (19.4%) and 83 practical studies (80.6%). Creativity research related to early childhood teachers is being actively conducted centering on practical research. Third, trends by research method showed 96 quantitative studies (93.2%), 7 qualitative studies (6.8%), and 0 literature studies (0%). Creativity studies related to early childhood teachers were being conducted with a focus on quantitative research. Fourth, the trend by research subject consisted of 100 studies (97.1%) related to early childhood teachers and 3 studies (2.9%) related to pre-service early childhood teachers. Fifth, trends by creativity factor were found in 56 studies (54.4%) related to teacher's variables and 47 studies (45.6%) related to creativity education methods. Studies related to teacher's variables were relatively higher than creativity education methods. As a result of this study, there is a lack of Christian education research in creativity research related to early childhood teachers, so it is expected that it will be done in the future.

• Journal of Environmental Health Sciences
• /
• v.49 no.3
• /
• pp.134-148
• /
• 2023

Background: The conducting of health effect surveys (HESs) in environmentally contaminated vulnerable areas (ECVAs) by the central and local governments has been increasing apace with the increase in demand for HESs since the Environmental Health Act was enacted in South Korea in 2008. Objectives: This study aimed to review the HESs of residents in ECVAs conducted in South Korea. Methods: An analysis was performed on 125 reports obtained from the Environment Digital Library, PRISM, and local government websites after selecting from 803 projects obtained as ECVAs from the Korea ON-Line E-Procurement System (1997~2021), National Institute Environment Research (2000~2021), and Korea Environmental Industry and Technology Institute (2009~2021). The reports were classified by background (residents' demand, HES, and more), research design (cross-sectional study, cohort, ecological study, and panel), pollution source (abandoned metal mine (AMM), industrial complex (IC), and more), and assessment method of exposure and health effects. The survey area was converted into administrative district codes for geographical mapping. Results: There were 37, 34, 18, and 10 cases associated with AMM, IC, waste incinerators, and coal-fired power plants, respectively. Most of the studies conducted were cross-sectional studies and ecological studies. The proportion of epidemiological investigations by residents' demand showed an increase from 0.0% to 8.9% for the central government while decreasing from 16.7% to 14.3% for local governments after 2008 compared to before 2008. HESs increased at both the central and local government levels since 2014. For the evaluation method, 365 environmental hazards, 319 health outcomes, and 302 biological markers were investigated, with the most commonly investigated items being metals, cancer, and blood metals. Conclusions: HESs of residents in ECVAs in South Korea have been continuously developed both quantitatively and qualitatively. Future improvements are expected, and systematic review and classification of the HESs is warranted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.289-301
• /
• 2009

In this work, wave run-up heights and resultant wave forces on a vertical revetment due to tsunami (solitary wave) are investigated numerically using a numerical wave tank model called CADMAS-SURF (CDIT, 2001. Research and Development of Numerical Wave Channel (CADMAS-SURF). CDIT library, No. 12, Japan.), which is based on a 2-D Navier-Stokes solver, coupled to a volume of fluid (VOF) method. The third order approximate solution (Fenton, 1972. A ninth-order solution for the solitary wave. J. of Fluid Mech., Vol. 53, No.2, pp.257-271) is used to generate solitary waves and implemented in original CADMAS-SURF code. Numerical results of the wave profiles and forces are in good agreements with available experimental data. Using the numerical results, the regression curves determined from the least-square analysis are proposed, which can be used to determine the maximum wave run-up height and force on a vertical revetment due to tsunami. In addition, the capability of CADMAS-SURF is demonstrated for tsunami wave forces acting on an onshore structure using various configuration computations including the variations of the crown heights of the vertical wall and the position of the onshore structure. Based on the numerical results such as water level, velocity field and wave force, the direct effects of tsunami on an onshore structure are discussed.

• Asia Marketing Journal
• /
• v.16 no.1
• /
• pp.21-33
• /
• 2014

When the negative event is published, the company tends to go through the negative impact on the firm performance. Especially, with the SNS, the negative event is instantly spread on indefinite region so the impact seems bigger than the period before the SNS media appearance. It seems that everyone considers the SNS media impact on the firm performance quite big. However, there has been no empirical study on the impact comparison on the firm performance between pre and post SNS media occurrence periods. This study tries to empirically compare the impact of the negative event on the firm performance between pre and post SNS media appearance. Our study starts fromthe basic but not verified question; Does really the negative event have more negative impact in the post-SNS-occurrence period than in the pre-SNS-occurrence period? In order to examine the impact of the negative publicity on firm performance in two eras, pre and post SNS media appearance, we used CAR (Cumulative Abnormal Resturns) model. By using this model, we could verify the statistical significance of cumulative abnormal returns in market between before and after the events. For event samples, we focused on food manufacturers and collected the negative events from 1991 to 2003 for pre-SNS occurrence period, and from 2010 to 2013 for post-SNS occurrence period. Based on the listed food companies at KOSPI, we researched Naver News Library (newslibrary.naver.com) and Naver News (news.naver.com) for all the individual negative events published for both periods. Firm returns data were collected from TS 2000 (KOCO Info) and market portfolio data were collected from KRX Exchange. Through our empirical analysis, our finding is interesting to note that the type of events differently influences on the firm performance. With the SNS, the health-related events have influence on the firm performance 'after the event day' whereas the company behavior trust events have influence 'before the event day'. Our findings have implications for management. When a negative event directly related to or threatening customers or their life such as health, it is crucial to fix up the situation right after the event occurs. On the other hand, when a negative event is not publicly available information such as company behavior trust, it is important for marketers to strengthen the firms' trust reputation and control the bad WOM before the event.

• Restorative Dentistry and Endodontics
• /
• v.47 no.4
• /
• pp.40.1-40.18
• /
• 2022

Objectives: This study aimed to investigate the influence of different obturation techniques compared to cold lateral compaction on the success rate of primary non-surgical endodontic treatments. Materials and Methods: Systematic searches were performed for studies published up to May 17^th, 2022 in MEDLINE/PubMed, Cochrane Library, Web of Science, Scopus, EMBASE, and Grey Literature Reports. Randomized clinical trials and nonrandomized (nonrandomized clinical trials, prospective or retrospective) studies that evaluated the success rate of primary non-surgical endodontic treatments obturated with the cold lateral compaction (control) and other obturation techniques were included. The revised Cochrane risk of bias tools for randomized trials (RoB 2) and nonrandomized studies of interventions (ROBINS-I) were used to evaluate the risk of bias. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool was used to evaluate the certainty of evidence. Results: Eleven studies (4 randomized clinical trials (RCTs), 4 prospective, and 3 retrospectives) were included. Two RCTs were classified as having some concerns risk of bias and 2 as a low risk of bias. Two nonrandomized studies were classified as having a critical risk of bias and 5 as having a moderate risk of bias. The GRADE analysis demonstrated a very low to moderate certainty of evidence. Conclusions: This systematic review generally evidenced no differences in the success rate of primary non-surgical endodontic treatments when the cold lateral compaction technique and other obturation techniques are performed. Further well-designed studies are still necessary.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3913-3923
• /
• 2023

Todays, medium energy resolution detectors are preferably used in radioisotope identification devices(RID) in nuclear and radioactive material categorization. However, there is still a need to develop or enhance « automated identifiers » for the useful RID algorithms. To decide whether any material is SNM or NORM, a key parameter is the better energy resolution of the detector. Although masking, shielding and gain shift/stabilization and other affecting parameters on site are also important for successful operations, the suitability of the RID algorithm is also a critical point to enhance the identification reliability while extracting the features from the spectral analysis. In this study, a RID algorithm based on Bayesian statistical method has been modified for medium energy resolution detectors and applied to the uranium gamma-ray spectra taken by a LaBr3:Ce detector. The present Bayesian RID algorithm covers up to 2000 keV energy range. It uses the peak centroids, the peak areas from the measured gamma-ray spectra. The extraction features are derived from the peak-based Bayesian classifiers to estimate a posterior probability for each isotope in the ANSI library. The program operations were tested under a MATLAB platform. The present peak based Bayesian RID algorithm was validated by using single isotopes(²⁴¹Am, ⁵⁷Co, ¹³⁷Cs, ⁵⁴Mn, ⁶⁰Co), and then applied to five standard nuclear materials(0.32-4.51% at.²³⁵U), as well as natural U- and Th-ores. The ID performance of the RID algorithm was quantified in terms of F-score for each isotope. The posterior probability is calculated to be 54.5-74.4% for ²³⁸U and 4.7-10.5% for ²³⁵U in EC-NRM171 uranium materials. For the case of the more complex gamma-ray spectra from CRMs, the total scoring (ST) method was preferred for its ID performance evaluation. It was shown that the present peak based Bayesian RID algorithm can be applied to identify ²³⁵U and ²³⁸U isotopes in LEU or natural U-Th samples if a medium energy resolution detector is was in the measurements.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.81-89
• /
• 2023

In modern society, blind people face difficulties in navigating common environments such as sidewalks, elevators, and crosswalks. Research has been conducted to alleviate these inconveniences for the visually impaired through the use of visual and audio aids. However, such research often encounters limitations when it comes to practical implementation due to the high cost of wearable devices, high-performance CCTV systems, and voice sensors. In this paper, we propose an artificial intelligence fusion algorithm that utilizes low-cost video sensors integrated into smartphones to help blind people safely navigate their surroundings during walking. The proposed algorithm combines motion capture and object detection algorithms to detect moving people and various obstacles encountered during walking. We employed the MediaPipe library for motion capture to model and detect surrounding pedestrians during motion. Additionally, we used object detection algorithms to model and detect various obstacles that can occur during walking on sidewalks. Through experimentation, we validated the performance of the artificial intelligence fusion algorithm, achieving accuracy of 0.92, precision of 0.91, recall of 0.99, and an F1 score of 0.95. This research can assist blind people in navigating through obstacles such as bollards, shared scooters, and vehicles encountered during walking, thereby enhancing their mobility and safety.

• Journal of Life Science
• /
• v.33 no.10
• /
• pp.842-850
• /
• 2023

Pyrrolnitrin, pyrrolomycin, and pyoluteorin are functional halogenated phenylpyrrole derivatives (HPDs) derived from microorganisms with diverse antimicrobial activities. Pyrrolnitrin is a secondary metabolite produced from L-tryptophan through four-step reactions in Pseudomonas fluorescens, Burkholderia cepacia, Serratia plymuthica, etc. It is currently used for the treatment of superficial dermatophytic fungal infections, has high antagonistic activities against soil-borne and foliar fungal infections, and has many industrial applications. Since pyrrolnitrin is easily decomposed by light, it is difficult to widely use it outdoors. As an alternative, fludioxonil, a synthetically produced non-systemic surface fungicide that is structurally similar and has excellent light stability, has been commercialized for seed and foliar treatment of plants. However, due to its high toxicity to aquatic organisms and adverse effects in human cell lines, many countries have established maximum residue levels and strictly control its levels. Pyrrolomycin and pyoluteorin, which have antibiotic/antibiofilm activity against Gram-positive bacteria and high anti-oomycete activity against the plant pathogen Pythium ultimum, respectively, were isolated and identified from microorganisms. This review summarizes the biosynthesis and production of natural pyrrolnitrin derived from bacteria and the characteristics of synthetic fludioxonil and other natural phenylpyrrole derivatives among the HPDs. We expect that a plethora of highly effective, novel HPDs that are safe for humans and environments will be developed through the generation of an HPD library by microbial biosynthesis and chemical synthesis.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.154-164
• /
• 2023

The Construction Technology Information System collects, processes, and provides the public with free of charge 16 types of construction technology-related texts or index information, such as construction standards, construction practices, and construction reports, required at construction sites to enhance domestic construction technology. This study judged that user satisfaction could be increased if the budget was allocated first to the most effective construction technology information DB establishment. For each type of construction technology information, the level of satisfaction felt by the population for the quantity provided and the value of use according to the acquisition and utilization of information were investigated. Reliability between independent variables and dependent variables through a multiple regression analysis process to identify how the demographic characteristics of the population affect user satisfaction and the factors that affect the use value of information for each type of construction technology information. and the correlation was analyzed. The correlation between the demographic characteristics of respondents and users' satisfaction with the provided quantity was generally low, but construction experience, age, etc. were found to have an effect on satisfaction with the provided quantity. In particular, among the demographic measurement items of respondents, the more construction experience they had, the higher their satisfaction level with the quantity provided of low-level technical standards, and it was analyzed that older age had an impact on satisfaction with the quantity provided for small and medium-sized business support information.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.29-37
• /
• 2024

In this paper, we propose an efficient image processing system to detect and track the movement of specific objects such as patients. The proposed system extracts the outline area of an object from a binarized difference image by applying a thinning algorithm that enables more precise detection compared to previous algorithms and is advantageous for mixed-mode design. The binarization and thinning steps, which require a lot of computation, are designed based on RTL (Register Transfer Level) and replaced with optimized hardware blocks through logic circuit synthesis. The designed binarization and thinning block was synthesized into a logic circuit using the standard 180n CMOS library and its operation was verified through simulation. To compare software-based performance, performance analysis of binary and thinning operations was also performed by applying sample images with 640 × 360 resolution in a 32-bit FPGA embedded system environment. As a result of verification, it was confirmed that the mixed-mode design can improve the processing speed by 93.8% in the binary and thinning stages compared to the previous software-only processing speed. The proposed mixed-mode system for object recognition is expected to be able to efficiently monitor patient movements even in an edge computing environment where artificial intelligence networks are not applied.