• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.434-443
• /
• 2010

A general purpose experimental set-up has been designed and implemented for students to carry out various experiments on inverters in the power electronics laboratories of universities, during a few hours of laboratory work. This is the first inverter setup that incorporates hardware and software control, as well as an optional user interface in a laboratory experimental set-up of a single multi-purpose inverter, thus making the system versatile and very practical for both undergraduate and graduate students. The system can be controlled either by a computer or through a liquid crystal display (LCD) and a keypad control unit, and it constitutes a low-cost alternative to relatively expensive commercial teaching sets. The computer provides a user friendly interface and easier control for laboratory environments equipped with computers. The LCD and keypad units eliminate the need for a computer, which makes this system usable in the laboratory as a standalone unit as well.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.122-126
• /
• 2008

Dual backlight unit incorporating a single light source integrated with a beam splitting reflector was demonstrated, providing a surface light beam for both the keypad and the display section simultaneously. The reflector was realized by aligning a groove substrate with a matching cover, and a light guiding module comprising a stack of light guide panels and prism/diffuser sheets was attached to both sides of the reflector. A light emanating from the light source-placed in the middle of the substrate-undergoes a series of reflections through the reflector to reach the input of the light guiding module. Then it is transformed into a surface light beam, which is used to irradiate the keypad and display sections simultaneously. As for the accomplished dual surface light sources, the measured average luminance and the spatial luminance uniformity were respectively about $420\;cd/m^2$ and 69% for the keypad section, and $640\;cd/m^2$ and 79% for the display section.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.641-647
• /
• 2023

In the fintech environment, ensuring secure financial transactions with smartphones requires authenticating the device owner. Smartphone authentication techniques encompass a variety of approaches, such as passwords, biometrics, SMS authentication, and more. Among these, password-based authentication is commonly used and highly convenient for user authentication. Although it is a simple authentication mechanism, it is susceptible to eavesdropping and keylogging attacks, alongside other threats. Security keypads have been proposed to address vulnerabilities in password input on smartphones. One such innovation is a group keypad, resistant to attacks that guess characters based on touch location. However, improvements are needed for user convenience. In this study, we aim to propose a method that enhances convenience while being resistant to eavesdropping and recording attacks on the existing group keypad. The proposed method uses new signs to allow users to verify instead of the last character confirmation easily and employs dragging-to-touch for blocking recording attacks. We suggest diverse positioning methods tailored for domestic users, improving efficiency and security in password input compared to existing methods.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.331-342
• /
• 2007

This study focused on developing MP3 smart clothing products and usability evaluation. MP3 smart clothing which was developed in this study contains e-textile keypad and a kit. The kit consists of MP3 Player, remote controller module and ear phone, and are easy to assemble and dismantle. And usability evaluation about MP3 smart Clothing which was developed in this study contains e-textile keypad and a kit. For making the MP3 Smart clothing, e-textile signal line and keypad was developed and a metal connection ring also was manufactured to adhere closely e-textile signal line to keypad. The last products are two kinds of MP3 smart clothing, jacket style of MP3-YSJ(Yonsei Smart Jacket) and safari style of MP3-YSS(Yonsei Smart Safari). Then usability evaluation conducted two times about MP3 smart clothing developed. Usability evaluation is classified by a module evaluation and an item evaluation. The module evaluation measured external appearance, material, a music controller, an ear phone(or a mini speaker) and connector. The item evaluation measured social acceptance, feeling of wearing, utility, easiness of maintenance and safety. The module evaluation described totally positive results in the first usability evaluation about MP3-YSJ 1.0 and MP3-YSS 1.0. The item evaluation shows a lower score in the social acceptance, especially the easiness of connector maintenance and the social acceptance of music-controller in MP3-YSJ 1.0 and MP3-YSS 1.0. The second usability evaluation conducted with improved products by the first usability test results. Results from second item evaluation indicated needs to improve the easiness of connector & music-controller maintenance and the social acceptance of music-controller in MP3-YSJ 2.0. In MP3-YSS 2.0, the easiness of material management and the social acceptance of music controller & connector needed to improvement. In particular, users felt inconvenience in the social acceptance because of e-textile keypad arrangement. To outweigh this disadvantage, further study is needed about keypad interface of the music controller.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.481-482
• /
• 2011

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.1
• /
• pp.109-118
• /
• 2009

While driving, the manual use of a mobile phone is heavily restricted due to the interference with the primary driving task. An alternative would be the use of speech interface. The current study aims to provide a guideline to implementation of a speech interface to the mobile phone. To do so, an expert evaluation was made and it revealed that a speech interface requires less workload, less performance degradation of the driving task than that of the keypad interface. To make speech interfaces more usable, new improvements are suggested. Subjective workload can be reduced and user satisfaction can be improved without degrading the primary task performance, for instance, by letting the user interrupt the speech of the phone, eliminating the repetitive words, letting the user know clearly what makes an error, providing a way to go back to the previous state, reducing the usage of keypad buttons and reducing the amount of the information on the screen.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.159-167
• /
• 2002

In this paper. we present a new method for monitoring of ECU's self diagnostic signals of vehicle without wire. In order to measure the ECU's self diagnostic signals, the interfaced circuit is designed to communicate ECU and designed terminal according to the IOS, SAE regulation of communication protocol standard. Micro-processor 80C196KC is used for communicating ECU's self diagnositc signals and the results are sent to the wireless terminal and PC monitoring system. Wireless terminal is also developed by 80C196KC, LCD, RF module, and keypad. The command from the keypad is sent to ECU through RF module and the result show on the Graphic LCD in real time. Software on PC is developed to monitor the ECU's self diagnostic signals using the Visual C++ complier in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self diagnostic signals are verified to monitor both ECU and portable terminal state. At the same time, the information to fix the vehicle's problem can be shown on the developed software. The possibility for remote measurement of ECU self diagnostic signal is verified through the developed systems and algorithms.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3437-3442
• /
• 2014

A well-known carbazole-based precursor (probe 1) was used for the detection of cysteine/homocysteine and fluoride. Probe 1 shows a "turn-on" response to cysteine/homocysteine and fluoride via enhancement in emission intensity at 442 nm and 462 nm respectively, in solutions and living cells. Furthermore, probe 1 behaves as a fluorescent molecular switch between cysteine/homocysteine and fluoride as the chemical inputs, which have been used for the development of a combinatorial logic circuit and a molecular keypad lock.

• Journal of Sensor Science and Technology
• /
• v.13 no.1
• /
• pp.20-26
• /
• 2004

For the disabled persons who can't use their limbs, motorized wheelchair that is activated by voice recognition module employing speaker independent method, was implemented. The wireless voice transfer device was designed and employed for the user convenience. And the wheelchair was designed to operate using voice and keypad by selection of the user because they can manipulate it using keypad if necessary. The speaker independent method was used as the voice recognition module in order that anyone can manipulate the wheelchair in case of assistance. Using the implemented wheelchair, performance and motion of the system was examined and it has over than 97% of voice recognition rate and proper movements.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.6
• /
• pp.423-432
• /
• 2013

Smart phones have been technologically advanced in many ways from basic cellular phones. However, most of all smart phone users in Korea still have been using the traditional Korean character keypads used in the basic cellular phones. It would be required to develop new keypads on smart phones with touch screen. In this paper, we extended the three standard Korean character keypads - Cheonjiin, Naragul, and SKY-Hangul - by adding dragging function on touch screen, then we compared writing speeds of the keypads based on the number of touching buttons and moving distance of the finger while writing a sentence. In addition, we proposed two new Korean keypads - 's-Gana' and 's-Bada', which are more suitable on smart phones. s-Gana assigned 7 representative consonants and 5 representative vowels in order on the 4x3 keypad, and s-Bada assigned consonants and vowels by considering their frequency of use. s-Gana and s-Bada keypads showed 3~19% and 9~24% of performance improvement, respectively, compared with the standard Korean keypads. Finally, we set up 5 requisites of SELF-T in order to evaluate the usability of Korean character keypads in smart phones, then we compared the keypads using the requisites.