• 방사선산업학회지
• /
• 제17권1호
• /
• pp.101-110
• /
• 2023

Radiation and radioisotopes have a high value in terms of utilization that can be used in convergence with various fields. However, due to the specificity of radiation, the use of radiation and radioisotopes is more difficult than in other industrial fields and also involves complex regulations. There are no clear industrial technology standards in these fields. Therefore, the growth of the radiation industry, especially including small companies, is being delayed. Since industrial technology standards play an important role in providing an institutional basis for the continuous development and settlement of domestic technology, the development of technical standards for the radiation and radioisotope industries can lead to systematic growth of the domestic radiation industry. To this end, the technology classification of the radiation industry was promoted and classified into 7 major categories, and detailed classification was divided according to the characteristics of each technology. In addition, a demand and perception survey on the need for industrial technology standards was conducted on RI licensed institutions and companies, and as a result, 61.4% responded that it was necessary, and in particular, they recognized the need for radiation safety(63.3%). In this paper, the technical classification for the radiation field is presented as the first step in the development of industrial technical standards for the radiation industry. In addition, the plan of the current status information and preparation of standard procedures of each category will be discussed.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1718-1725
• /
• 2008

본 연구는 해방이후 1980년대까지 국내 초등교육시설의 건축적 특성을 규정했던 표준설계도들 중 관련 연구가 부족했던 1964년과 1975년 서울시 교육위원회의 국민학교 건축 표준설계도를 대상으로 각 표준도의 구성, 평면 및 입면, 부대시설 계획 등의 항목으로 나누어 각 표준도가 가지는 특성을 고찰하였다. 두 표준도 모두 장방형 교실과 편복도형 블록플랜, 일체의 의장이 배제된 철저히 기능적인 외관 등 1980년대까지의 전형적인 국내 학교건축의 특성들으 보여주고 있다. 하지만 중복도형 블록플랜 그리고 지하교실, 교사동내에 계획된 적층형의 재래식 화장실 등 그동안 잘 알려져 있지 않았던 계획특성들과 개구부 및 외벽구성 방식 등 세부적인 부분들에서의 변화도 두 표준도를 통해 파악할 수 있었다.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.319-326
• /
• 2015

본 논문에서는 OPC 스택이 없는 제어기를 OPC DA 클라이언트와 통신하도록 하는 변환 소프트웨어 개발 기법을 제안한다. 제안된 기법은 OPC DA 표준 프로토콜에 기반을 둔 OPC 서버 구현, OPC 태그 및 포인트의 정보를 확인할 수 있는 GUI 개발, OPC 프로토콜에서 개방형 표준 프로토콜로 변환하는 변환모듈 개발 등의 3가지 과정으로 구성된다. OPC DA 표준 프로토콜에 기반을 둔 OPC 서버 구현 과정은 산업용 OPC DA 클라이언트와 OPC DA 프로토콜을 통하여 데이터를 주고받을 수 있도록 PC에 서버를 구현하는 단계이다. OPC 태그 및 포인트의 정보를 확인할 수 있는 GUI 개발 과정은 OPC 서버를 구동시키고 이를 윈도우 레지스트리에 등록하며 OPC 태그 및 포인트를 확인하고 직렬통신 데이터의 송수신 확인을 위한 GUI 개발 단계이다. OPC DA 프로토콜에서 개방형 표준 프로토콜로 변환하는 변환모듈 개발과정은 OPC DA 클라이언트로부터 수신된 OPC 태그의 데이터를 개방형 표준 프로토콜을 사용하는 산업용 제어기기와 직접적으로 통신을 할 수 있도록 프로토콜을 변환함으로써 데이터를 송수신 할 수 있는 변환모듈을 개발하는 단계이다. 개발된 소프트웨어의 효율성을 평가하기 위하여 본 논문에서 개발한 서버단의 소프트웨어와 OPC 클라이언트를 연결하고, 개방형 표준 프로토콜을 사용하는 5개의 샘플 제어기기와 연결하여 테스트 한 결과 전체 송수신 패킷 중에서 96.98%의 평균 통신 성공률을 나타내었다. 따라서 본 논문에서 제안한 OPC DA 변환 소프트웨어를 이용하여 Modbus 프로토콜을 지원하는 산업용 빌딩 제어 장치와 산업용 OPC DA 클라이언트 사이에 통신을 수행시킬 수 있음이 확인되었다.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.64-71
• /
• 1997

Floating aquatic plant system using water hyacinth was applied to examine feasibility as a wastewater treatment system for the industrial complex in rural area. The wastewater from the industrial complex does not likely contain toxic pollutants because the industries which generate wastewater with toxic compounds are not allowed to move in. Pilot plant was installed at Baeksuk Nongkong Danzi in Chunahn-City, Chunchungnam - Do , and field study was performed during summer and fall of 1996. Hydraulic loading rate was 0. $0.19m^3/m^2$.day. The effluent concentration of DO was higher than influent, and it implies that 0.6m depth reactor was reaerated enough to increase DO level. The influent concentration of BOD varied significantly from less than 30 to 120mg/${\ell}$ during the study period, however, effluent concentrations were generally lower than the water quality standard and removal efficiency was up to 85%. The influent concentration of COD also showed wide variation from less than 40 to 160mg/${\ell}$ and effluent concentration was higher than water quality standard when influent concentration was over l00mg/${\ell}$. The influent concentrations of T-N and T-P were lower than water quality standard and no further treatment was required, and these compounds were also removed in the system. Although some improvement and refinement are still required, overall* the floating aquatic plant system was proved to be feasible to apply to treat wastewater from industrial complex in rural area.

• 한국산업보건학회지
• /
• 제11권3호
• /
• pp.235-240
• /
• 2001

This study was performed to compare the lead levels of 20 quality control standard samples(KOSHA:18-2000) and 72 field samples in lead-acid battery manufacturing plant between ICP and portable-XRF methods. 1. While the proficiencies of 20 quality control standard samples by ICP were 100%, those of analytic result values by XRF were 75%. 2. The correlation coefficient(r) between the reference values for quality control (REF) and the analytic result values by ICP (ICP) was 1.0(p<0.05), and simple linear regression equation and the coefficient(R2) were REF = -0.0009 + 1.016 ICP and 0.9997, respectively. 3. The correlation coefficient(r) between the analytic result values of quality control standard samples by ICP (ICP) and by XRF (XRF) was 0.975(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -0.0003 + 1.002 XRF and 0.950, respectively. 4. The correlation coefficient(r) between the analytic result values for lead samples of a lead-acid battery manufacturing plant by ICP (ICP) and by XRF (XRF) was 0.993(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -2.058 + 0.996 XRF and 0.987, respectively. 5. While the frequency distributions of XRF /ICP(Ratio) for each ICP concentration levels in a lead-acid battery manufacturing plant revealed high proportion in ratio range of 0.876-1.125 than in ration range of 1.126-1.375. Also, ICP concentration level in ration range of 0.786-1.125 was increased with increase of frequency distribution of XRF/ICP. 6. The limit of detection of XRF on lead was determined to be $6.11{\mu}g$/filter The data presented in this study indicated that relationship for lead level of quality control samples and field samples in a lead -acid battery manufacturing plant by ICP and portable-XRF methods was proved. The practicing industrial hygienist can use portable-XRF to produce a rapid on-site determination of lead exposure that can immediately becommunicated to workers and help identify appropriate levels of personal protection.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.693-708
• /
• 2013

Purpose: This study is to develop an evaluation model for analysis of CMMS Implementation status and provide CMMS advancement methods to maximize implementation effect through the evaluation model. Methods: After extracting common modules from CMMS packages and establishing evaluation standard for each module, then the evaluation standard is applied to 33 Korean companies for evaluating their own current implementation status. Results: Preventive maintenance and analysis information modules were considered the most vulnerable in Korean companies which have introduced CMMS packages. And the reason why preventive maintenance is vulnerable is that there is poor build-up of their own preventive maintenance standards. Conclusion: Korean companies which will introduce CMMS need to make preventive maintenance standards, and data of the materials and the equipment to improve the effectiveness in advance.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.457-465
• /
• 2021

본 연구에서는 국방표준분류체계의 현실태 및 문제점을 분석하고 국내외 표준분류체계 사례 분석을 통해 규격관리 업무를 효율적으로 수행하기 위한 방안을 제안하였다. 국방기술자료의 군수품 품질 문제를 지속적으로 해소하기 위해 민간의 우수 기술을 적시에 반영하고 완성도 높은 국방규격의 관리를 위해 민간의 표준체계를 벤치마킹해야 한다. 먼저, 현실태 분석을 위해 국내 민간 KS 및 국외 ICS코드, 미국 국방표준시스템을 통해 나토 분류체계를 분석하였다. 우리군의 경우는 방위사업청에서 운영 중인 국방표준종합시스템을 통해 국방규격 분류체계의 현실태를 파악하였다. 각 경우를 우리 군의 국방규격 분류체계에 산업표준과 연계해 국방표준분류체계에 적용하였다. 국방부 무기체계/전력지원체계의 분류는 전순기 군수품에 대해 8대 무기체계와 6대 전력지원체계로 분류한 우리 군에 가장 적합한 분류체계이다. 대분류로 국방부 무기체계/전력지원체계의 분류를 채택하였고, 중분류와 소분류로는 나토 분류체계를 채택하였다. 구체적으로 대분류 12개 분야, 중분류 66개 분야, 소분류 352개 분야로 각각 분류하였다. 본 연구에서는 국방표준관리체계 확립으로 민간의 기술반영을 통한 신규 국방규격 분류체계 개선방안으로 활용될 수 있을 것으로 판단된다.

• 산업공학
• /
• 제16권spc호
• /
• pp.55-59
• /
• 2003

For the interoperability between workflow systems, we have proposed data exchange scenarios based on mobile agents. The scenarios include sequence diagrams and methods defined by UML. The mobile agents are designed based on the mobile agent standard MASIF developed by OMG.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2443-2445
• /
• 2000

In this paper, the Intergrated SCADA is used to computer systems designed to perform the following functions for power plant. - to collect data from industrial plant devices or transducers - to process and perform calculations on the collected data - to present collected and derived data on displays on MMI - to accept commands entered by human operators and act on them such as sending control commands to plant devices. This system is characterised by open architectured that is based on the internationally recognized industrial standard for industrial automation control language, the IEC 1131-3

• 산업융합연구
• /
• 제1권2호
• /
• pp.95-105
• /
• 2003

"All things possibly could be measured.", measurement is a essential part in all kinds of industry, especially in manufacturing. Korean Industrial Standard has been established and announced in September, 1961. Measurement has been emphasized. But until now, measurement hasn't been located to the core of manufacturing in domestic. So, this study suggests improvement guide line for the multilateral problems of measurement system based on the investigation of 146 small and medium-sized enterprises in April, 2002.