• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.686-693
• /
• 2003

An intensive study was conducted for crashworthiness structural design of recently developed Korean High Speed Train. Two nam design concepts are setup to protect the both crews and passengers from serious injury at heavy collision accidents, and to reduce damages of the train itself at light collision accidents. For occupant protection a collision against a movable 15 tons rigid obstacle at 110 kph and a train-to-train collision at 30 kph were selected as accident scenarios for the heavy collisions based on the train accident investigations. A train-to-train collision at 8 kph was used for the light collisions. The crashworthiness behaviors of KHST have been evaluated numerically using the finite element method. Also, one-dimensional collision analyses show good crashworthy responses in a full rake consist and 3-dimensional shell element analyses do in the front-end structures of the power car. Occupant analyses and sled tests demonstrated that KHST performs well enough to protect occupants under the considered accident scenarios.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.526-533
• /
• 1999

Tn this study, the crashworthy design of the full rake of KHST (Korean High Speed Train under development in G7-project) is numerically evaluated using 2-dimensional crash dynamics. The results of KHST are compared with those of TGV-K (TGV for Seoul-Pusan line). KHST shows better crashworthy behaviors after impact. Specifically, impact forces, decelerations and overriding displacements are much reduced in KHST All the design guidelines under SNCF accident scenario (collision against a movable rigid mass of 15 ton at 110 km/h) are satisfied in KHST.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.724-729
• /
• 2003

The prototype of Korean high speed train (KHST), composed of two power cars, two motorized cars and three trailer cars, has been designed, fabricated and tested by the domestic researchers. In this paper, the body vibration has been reviewed from the viewpoint of the vehicle's safety and the vibration limits for components and sub-assemblies mounted on the car-body using by the experimental method. The on-line test of KHST has been carried out up to 260 km/h in the KTX line and proved that KHST has no problems in the vehicle's safety and the vibration limits at this speed. And the characteristics of body vibrations has been predicted at 300 km/h and 350 km/h by fitting curve about the measured acceleration signals.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.445-452
• /
• 1998

The dynamic performance design of catenary-pantograph system which collects current for the next generation Korean high speed train(KHST) was considered. Used was the same dynamic model of the catenary-pantograph system as that of TGV-K which will be introduced for Kyung-bu corridor. Using the model , sensitivity analysis fer design variables were made to improve dynamic performance of KHST system. The results of sensitivity analysis and performance improvement are as follows: (1) It was found that aerodynamic force, tension of contact wire, mass of contact strip, mass of supporting contact strip, mass of clamp, mass of steady arm, and stiffness of plunger were the design variables most influencing the dynamic performance of the system. (2) Pantograph with reductions of 20% aerodynamic force, 34% weight of supporting contact strip, 20% spring constant of plunger, and 34% equivalent mass of steady arm was very possible system for the KHST which will be running at maximum operating speed 350 km/h.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.142-149
• /
• 2000

It is required that the indoor-noise level of KHST (Korean high speed train) should be lower than 66 ㏈(A) at 350 km/h. In this study, the indoor-noise level of KHST has been predicted to determine the maximum allowable sound power levels of major noise sources. It is found that the indoor-noise requirement for KHST can be met by increasing the transmission losses of the floor and side-wall structures as well as by lowering the sound power levels of two major noise sources including the motor fans.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1093-1098
• /
• 2001

The interior sound pressure level of the Korean high speed train is predicted using ray acoustic method. The motor car, motorized car and passenger cabin are investigated under the environment of passing open countryside and inside tunnel Calculated sound levels of KHST are compared with the those of KTX prototype which vehicle shows similar acoustic behavior with KHST for the purpose of assuring the calculated data. In order to reduce the calculated SPL in systematic way, contribution analysis of sound sources and sensitivity analysis of concerning wall's transmission loss on the SPL of the designated receiving points are carried out. Finally, practical design suggestions are proposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1360-1366
• /
• 2000

KHST project plans to design and to build an high speed train. There are noise requirements in passenger room for the standing and running train, which should be reached. Noise prognosises are calculated for the standing and running TM5(Motorized car) and TT4(Trailer car) train (v=300km/h) to find out critical areas in or around the train. On those areas, actions of noise reduction are proposed to reach the requirements. Finally noise prognosises are calculated for the higher velocity of v=350km/h.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.138-143
• /
• 2003

KHST(Korean High-Speed Train, 350km/h), composed of 7 cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify hte design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. BRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of KHST. The traction measurement items are focused on the verification of motor block performances.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.580-585
• /
• 2003

Korean high speed train (KHST) has adopted a combined electric/ mechanic (friction) braking system. Electric brakes are consist of rheostatic brake, regenerative brake and eddy current brake and mechanical brakes are composed of disc brake, wheel disc brake and tread brake. In this paper, we introduce the braking performance test and the measuring method of mechanical brake. And disc brake performance has been reviewed by the experimental method. The on-line test of KHST has been carried out up to 260 km/h and proved that the disc braking capacity of KHST is sufficient.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.200-205
• /
• 2004

The pantograph for Korean High Speed Train was developed and had been evaluating by through 'G7-R&D project for home grown high speed train technology' In this study, in mechanical aspect, the variation trend of contact force between pantograph and catenary according to the train running speed and driving pattern is conducted. A measuring system for current collecting performance and mechanical characteristics is used for this study, developed and installed on the prototype Korean High Speed Train, and physical characteristics were measured while the KHST runs on the test track. Through this study, remarkable trends of variation are found and analyzed from measured acceleration and vertical contact force between the pan head in pantograph and contact wire in catenary system according to the driving pattern and the train raised a running speed up to 300km/h.