• 무역상무연구
• /
• 제55권
• /
• pp.265-290
• /
• 2012

CEPA (Comprehensive Economic Partnership Agreement) between India and Korea may vitalize Korean economy more and more. Currently most of Korean firms have entered into manufacturing industries like electronics and automobiles. But only a few Korean companies are trying to penetrate into Indian green industry so this paper suggest how to enter into Indian green industry, especially renewable energy sectors. First, Exporting main shaft, tower-flange and polysilicon products can be considered, as a first step of entry mode. Second, entry mode based on contract like technology licensing, strategic alliance and joint venture establishment can be also one of options. For example, Korean solar energy industry which show more competitiveness than that of Indians should try to make technological licensing on PV modules. In addition to this, they should also try to make joint ventures with right Indian partners and build up 'Solar City' nearby regions like Gurgaon in India where many Korean firms are located. Korean shipbuilding firms like Hyundai Engineering which keep on developing wind turbo engines can also try to make strategic alliance with Indian firms like Suzlon which has strong competitiveness. After that, they should explore Korean and Indian wind sector markets together. Third, brownfield investment can be last and final option as a entry mode as we consider the peculiar characteristics of renewable energy industry. Lastly, Korean government which are rush to indulge into green business should formulate more proper and realistic policies to give big incentives the concerned firms which are trying to open international green market so government should make Korean green firms not to lose good market opportunities related to green industry like renewable energy sectors. Renewable energy sectors are basically regarded as infrastructures so close contact to Indian central government as well as state government will be also required.

• 방사선산업학회지
• /
• 제5권2호
• /
• pp.107-112
• /
• 2011

Electron beam-induced crosslinking of polycaprolactone (PCL) films containing various crosslinking agents (CAs) was investigated in this study. PCL films containing various CAs prepared by a solution casting method were irradiated by electron beams at various absorption doses and the irradiated PCL films were investigated in terms of their crosslinking degree, thermal and mechanical properties, and biodegradability. Based on the results of the crosslinking degree measurement, triallyl isocyanurate was found to be most effective for the electron-beam induced crosslinking of PCL films. The results of the UTM, DMA, and TMA revealed that the thermal and mechanical properties of the crosslinked PCL films were greatly improved in comparison to those of the pure PCL. The results of the enzymatic degradation test revealed that the biodegradability of the crosslinked PCL films was reduced in comparison to that of the pure PCL.

• 방사선산업학회지
• /
• 제8권1호
• /
• pp.53-57
• /
• 2014

The kenaf is quickly developing as a renewable resource. Kenaf can be grown under a wide range of weather conditions. Modification of kenaf fiber by graft polymerization provides a significant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic group using electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. The wettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiber reinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cement composite.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.353-357
• /
• 2011

Degradation of p-nitrophenol has been carried out using only gamma irradiation or gamma irradiation with $H_2O_2$ or $Na_2S_2O_8$. Effects of different operating parameters such as initial concentration ($50mg\;l^{-1}$, $100mg\;l^{-1}$, $200mg\;l^{-1}$, $300mg\;l^{-1}$, $400mg\;l^{-1}$, $500mg\;l^{-1}$ and $600mg\;l^{-1}$) on the extent of degradation has been investigated. At 5 kGy, $50mg\;l^{-1}$ p-nitrophenol was completely degraded, and the radiolytic degradation of p-nitrophenol was described by the pseudo-first-order kinetic model. The combination of gamma irradiation with $H_2O_2$ or $Na_2S_2O_8$ leads to an enhanced effect, which remarkably increased the degradation efficiency of p-nitrophenol and TOC removal. However, at high $H_2O_2$ concentration, the efficacy of p-nitrophenol degradation is reduced because ${\cdot}OH$ radicals are scavenged by $H_2O_2$ and $Na_2S_2O_8$.

• 방사선산업학회지
• /
• 제6권4호
• /
• pp.317-322
• /
• 2012

In this study, the preparation of a temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-grafted surface was performed using an eco-friendly and biocompatible ion beam-induced surface graft polymerization. The surface of a perfluoroalkoxy (PFA) film was activated by ion implantation and N-isopropylacrylamide (NIPAAm) was then graft polymerized selectively onto the activated regions of the PFA surfaces. Based on the results of the peroxide concentration and grafting degree measurements, the amount of the peroxide groups formed on the implanted surface was dependant on the fluence, which affected the grafting degree. The results of the FT-IR-ATR, XPS, and SEM confirmed that the NIPAAm was successfully grafted onto the implanted PFA. Moreover, the contact angle measurement at different temperatures revealed that the surface of the PNIPAAm-grafted PFA film was temperature-responsive.

• 방사선산업학회지
• /
• 제12권4호
• /
• pp.349-353
• /
• 2018

Metronidazole (MD), which is used as an antibiotic, is largely used as an oral and skin application agent, and has inhibiting effect on the production of the fungus causing malodor. However, the maximum drug inclusion concentration is 0.75% of skin ointment in commercially available. In this study, hydrogels containing high concentration of metronidazole were prepared by using radiation crosslinking technique based on biocompatible polymers, and release characteristics and antimicrobial properties were evaluated. This study was preliminary carried out to investigate whether it could be used effectively as antibacterial dressing materials.

• 한국지열·수열에너지학회논문집
• /
• 제13권4호
• /
• pp.21-30
• /
• 2017

Recently, It has increased the importance of building energy saving. Pipe insulation as well as building envelope insulation is to improve energy efficiency and reduce the energy loss. However, there continues to use the old standard for pipe insulation that is one of the most important elements in energy savings in buildings. The purpose of this study is to propose suitable pipe insulation thickness for reducing building energy use. The study also reviews pipe insulation thickness standard in accordance to Korea standard, ASHRAE 90.1 and BS5422 and analyzed through thermal simulation. As a result, it is necessary to apply the performance design method of the pipe insulation thickness to reduce the energy loss of the piping.

• 에너지공학
• /
• 제25권4호
• /
• pp.37-52
• /
• 2016

석유제품은 한국 및 일본 모두에서 1차 에너지원 중 소비 비중이 가장 높다. 이에 본 논문에서는 산업연관분석을 이용하여 한국 및 일본 정유산업의 국민경제적 역할을 비교 분석해 보고자 한다. 먼저 수요유도형 모형을 이용하여 정유산업의 생산유발효과 및 부가가치 유발효과를 살펴본다. 다음으로 공급유도형 모형 및 레온티에프 가격모형을 적용하여 각각 정유산업의 공급지장효과 및 물가파급효과를 분석한다. 이 과정에서 정유산업을 내생부문이 아닌 외생부문으로 다룸으로써 정유산업을 중심으로 한 논의결과를 제시한다. 수요유도형 모형의 분석 결과, 정유산업에서의 1원 생산이 타 산업에 미치는 생산유발효과는 한국 0.2620원 및 일본 0.6537원으로 일본의 값이 더 크다. 하지만 타 산업 부가가치 유발효과를 분석한 결과 각각 0.0946원 및 0.0536원으로 한국의 값이 일본의 값보다 크다. 정유산업 산출물 1원 어치의 공급지장이 타 산업에 미치는 부정적 생산차질효과를 의미하는 공급지장효과를 살펴보면, 한국 0.9657원 및 일본 1.4476원으로 일본 정유산업의 공급지장효과가 더 큰 것으로 분석되었다. 정유산업의 산출물 가격 10% 인상으로 인한 물가파급효과는 한국 0.3819% 및 일본 0.3409%로 한국의 값이 더 큰 것으로 분석되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.678-681
• /
• 2007

Now Korea depends upon the imported resources for about 97% of total using energy. So from October, 2001 Korean government has supported renewable energy business owners by providing them with Electric Power Industry Basis Fund. Only plant-use electricity of the small hydro power plant is exactly managed, but other renewable energy plants is unprepared or not yet managed. Therefore, in this paper, we'll analyze the plant-use electricity management of the small hydro power and propose improvement plans for plant-use electricity of the photovoltaic power plant.