• The Korean Journal of Financial Studies
• /
• v.12 no.1
• /
• pp.127-161
• /
• 2006

본 연구는 미국과 유럽의 채권 전자거래에 대한 제도를 분석한 후, 우리나라의 채권 전자거래에 대해 시사점을 제시하고자 한다. 본 연구의 결과는 다음과 같이 요약된다. 첫째, 미국과 유럽에선 채권 전자거래 시스템(Electronic Trading System, 이하 ETS)의 영업행위가 원칙적으로 증권 중개업의 관점에서 규제된다. 이러한 방향의 규제 체계는 다양한 형태의 채권 ETS가 등장할 수 있도록 하여 채권시장의 발전에 기여한다. 둘째, 우리나라의 $\ulcorner$한국증권선물거래소법$\lrcorner$ 15조 2항 및 $\ulcorner$증권거래법시행령$\lrcorner$ 84조의27 6항은 다양한 형태의 채권 ETS의 등장을 원천적으로 봉쇄함으로써 채권시장의 발전을 저해하고 있다. 셋째, 현행 $\ulcorner$한국증권선물거래소법$\lrcorner$ 15조 2항은 주식 및 선물거래에 대해서 계속 적용하되 채권거래에 대해서는 그 적용이 유보될 필요가 있다. 이를 통하여 $\ulcorner$한국증권선물거래소법$\lrcorner$은 주식시장을 활성화 시키는 순기능을 유지하면서 채권 ETS의 등장을 원천적으로 봉쇄하는 역기능을 피할 수 있다. 넷째, $\ulcorner$한국증권선물거래소법$\lrcorner$ 15조 2항이 채권거래에 대해서 적용되지 않는다면, $\ulcorner$증권거래법시행령$\lrcorner$ 84조의27 6항은 삭제되어야 하며, 대신에 증권거래법은 채권 ETS의 활동 범위와 요건을 정의해 주어야 한다. 채권 ETS의 활동은 원칙적으로 증권업자의 중개활동으로 간주되어야 한다. 채권 ETS의 중개 규모가 일정 수준을 넘어설 경우 거래소에 준하는 보고, 공시 및 감시 요건이 부과되는 것이 바람직하다. 다섯째, 채권시장의 효율성을 강화하기 위해서 채권 ETS에 대해서 적용되는 투명성 강화, 시장분할 방지, 공정거래 등에 대한 규제는 거래 대상의 특성에 따라서 탄력적으로 조정될 수 있어야 한다.

• Journal of the Korean Professional Engineers Association
• /
• v.24 no.6
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.720-730
• /
• 2016

Greenhouse-gas emission factors are widely used to estimate emissions arising from a defined unit of a specific activity. Such estimates are used both for international reporting to the United Nations Framework Convention on Climate Change (UNFCCC) and for myriad national and sub-national reporting purposes (for example, European Union Emissions Trading Scheme; EU ETS). As with the other so-called 'Kyoto protocol GHGs', the Intergovernmental Panel on Climate Change (IPCC) provides a methodology for national and sub-national estimation of $N_2O$ emissions, based on the sector from which the emissions arise. The objective of this study was to develop a integrated emission factor to estimate the direct $N_2O$ emission from an agricultural field cultivated with the red pepper, soy bean, spring cabbage, autumn cabbage and potato in 2010~2012. Emission factor of $N_2O$ calculated using accumulated $N_2O$ emission, N fertilization rate, and background $N_2O$ emission over three year experiment was $0.00596{\pm}0.001337kg$ $N_2O-N(N\;kg)^{-1}$. More extensive studies need to be conducted to develop $N_2O$ emission factors for other upland crops in the various regions of Korea because $N_2O$ emission is influenced by many factors including climate characteristics, soil properties, and agricultural practices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.9
• /
• pp.1115-1125
• /
• 1997

Experiments have been conducted to obtain local and average heat transfer coefficients associated with impingement of a row of circular, free surface-water jets on a constant heat flux surface. Nozzle arrays are a row of 3 jets (nozzle dia.=4.6 mm) and a row of 5 jets (nozzle dia.=3.6 mm), and the nozzle configuration is Reverse cone type revealed good performance in heat transfer. Nozzle-to-plate spacings ranging from 16 mm to 80 mm were investigated for two jet center to center spacings 25 mm and 37.5 mm in the jet velocity of 3 m/s (R $e_{D}$=27000) to 8 m/s (R $e_{D}$=70000). For a row of 3 jets and a row of 5 jets, the stagnation heat transfer of the central jet is lower than that of adjacent jets. In the wall jet region between jets, for small nozzle-to-plate spacing and large jet velocity, the local maximum in the Nusselt number was observed, however, for small jet velocity or large nozzle-to-plate spacing, the local maximum was not observed. Except for the condition of $V_{O}$=8 m/s and H/D=10, the average Nusselt number reveals the following ranking: a row of 5 jets, a row of 3 jets, single jet. For a row of 3 jet, the maximum average Nusselt number occurs at H/D=8 ~ 10, and for a row of 5 jets, it occurs at H/D=2 ~ 4. Compared with the single jet, enhancement of average heat transfer for a row of 3 jets is approximately 1.52 ~ 2.28 times, and 1.69 ~ 3.75 times for a row of 5 jets.ets.s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1563-1570
• /
• 1999

This paper relates to the soft decision method with erasure technique in digital terrestrial television broadcasting system. The proposed decoder use the CSI derived from using the pilots in receiver. The active real(I) and imaginary(Q) data are transferred to the branch metric calculation block that decides the Euclidean distance for the soft decision decoding and also the estimated CSI values are transferred to the same block. After calculating the Euclidean distance for the soft decision decoding, the Euclidean distance of branch metric is multiplied by CSI. To do so, new branch metric values that consider each carrier state information are obtained. We simulated this method in better performance of about 0.15dB to 0.17dB and 2.2dB to 2.9dB in Rayleigh channel than that of the conventional soft decision Viterbi decoding with or without bit interleaver where the constellation is QPSK, 16-QAM and 64-QAM.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.172-172
• /
• 2016

The International Maritime Organization(IMO) adopted the International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004 to prevent the transfer of aquatic organisms via ballast water. Forty ballast water treatment systems were granted final approval. A variety of techniques have been developed for ballast water treatment including UV treatment, indirect or direct electrolysis, ozone treatment, chemical compounds and plasma-arc method. In particular, using plasma and ozone nano-bubble treatments have been attracted in the fields. However, these treatment systems have a problem such as remained toxic substance, demand for high power source, low efficiency, ets. In this paper, we present our strilization results obtained from membrane type electrolytic-reduction treatment system The core of an electrolysis unit is an electrochemical cell, which is filled with pure water and has two electrodes connected with an external power supply. At a certain voltage, which is called critical voltage, between both electrodes, the electrodes start to produce hydrogen gas at the negatively biased electrode and oxygen gas at the positively biased electrode. The amount of gases produced per unit time is directly related to the current that passes through the electrochemical cell. From the results, we could confirm the sterilization effect of bacteria such as S. aureus, E. Coli and demonstrate the mechanism of sterilization phenomena by electrolytic-reduction treatment system.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2394-2398
• /
• 2013

Nicotine is the main component of environmental tobacco smoke, and its presence in indoor air is widely used as a secondhand-smoke indicator. Environmental tobacco smoke is a major source of indoor air pollution, but sufficient investigation of the uncertainty of its measurement, which mirrors the reliability of nicotine measurement, has not been performed. We calculated the uncertainty of measurement of indoor air nicotine concentration at low, medium, and high concentrations of 11.3798, 10.1977, $98.3768{\mu}g/m^3$, respectively, and we employed the Guide to the Expression of Uncertainty in Measurements (GUM), proposed by the International Organization for Standardization (ISO). The factors considered in determining the uncertainty were uncertainty of the calibration curve (calibration curve and repeated measurements), desorption efficiency, extraction volume, and sampling airflow (accuracy and acceptable limits of flowmeter). The measurement uncertainty was highest at low concentrations; the expanded measurement uncertainty is $0.9435{\mu}g/m^3$ and is represented as a relative uncertainty of 63.38%. At medium and high (concentrations, the relative uncertainty was 13.1% and 9.1%, respectively. The uncertainty of the calibration curve was largest for low indoor nicotine concentrations. To increase reliability of measurement in assessing the effect of secondhand smoke, measures such as increasing the sample injection rate ($1{\mu}L$ or more), increasing sampling volume to increase collected nicotine, and using gas chromatography-mass spectrometry (GC/MS) or GC/MS/MS, which has a lower quantitation threshold, rather than gas chromatography with nitrogen phosphorous detector, should be considered.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.111-127
• /
• 2003

Statement of problem : Resin cements were used widely on all ceramic crowns, but the influence of resin cements on biocells was not understood clearly. Purpose : This study was investigated to evaluate the biocompatibility of resin cements for all-ceramic crowns. Material and Method : The resin cements used in this study were Panavia F (Kuraray Co., Ltd. Japan), Variolink II (Vivadent Ets., Schann / Liechtenstein), and Bistite II (Bistite dual cure resin cement-clear Tokuyama Soda Co. Japan). The viability of normal human oral keratocytes, gingival fibroblast, and gingival fibroblast immortalized by Human Papilloma virus 16 was measured in vitro for evaluation of cytotoxicity on resin cements, and the response of pulp tissue was analyzed and evaluated with light microscope after application of cements at cutting edge of incisors. Results : The normal human oral keratocytes was the most sensitive to toxicity of resin cement, and toxicity of cements was higher in Bistite II than in Variolink II. The cell viability of immortalized gingival fibroblast did not affected by type of cement and cultivation period, but there was a tendency that cytotoxicity in Bistite II was higher than in Variolink II. The cell viability of gingival fibroblast was similar to that of immortalized gingival fibroblast regardless of cement type, but Bistite II showed more toxic than others after 5 days cultivation. The responses of pulp tissue according to cement type were similar after 2 days cultivation, but revealed high toxicity in Bistite II after 10 days cultivation. Conclusion : Variolink II was more biocompatible than any other resin cements used in this study.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.71-76
• /
• 2001

This study was conducted to determine the urinary nicotine and cotinine concentration in 126 smokers and 143 nonsmokers. While urine samples were being collected, personal characteristics related to smoking habit such as sex, age, number of years since a person has been a smoker, average number of cigarettes consumed per day, and number of smokers in the family were surveyed. Urinary nicotine and cotinine concentration were analyzed by GC/NPD. The smokers smoked an average 17.0 cigarettes per day and the average concentration of nicotine and cotinine was 3.88 $\mu\textrm{g}$/ml and 3.64 $\mu\textrm{g}$/ml, respectively. The average number of smokers in the family was 0.72 persons and the average concentration of nicotine and cotinine were 0.11 $\mu\textrm{g}$/ml and 0.02 $\mu\textrm{g}$/ml in the urine of non-smokers, respectively. The concentration of nicotine and cotnine in smoker\`s urine was dependent on the number of cigarettes smoked per day(p<0.01). The number of years since a person had been a smoker, and the number of smokers in the family were not associated with the concentration of nicotine and cotinine. Also there was no significant effects of passive smoking on the family of smokers by the level of nicotine and cotinine concentration. We describe the relationship between smoking habit as assessed by urinary nicotine and cotinine excretion. This study provides an evidence for the assessment of active and passive exposure to tobacco smoke.

• Korean Journal of Organic Agriculture
• /
• v.28 no.4
• /
• pp.535-553
• /
• 2020

In this study, the characteristics of the waste sector CDM project were analyzed through cluster analysis of the waste sector CDM project and the analysis of the CDM investment cost in waste sector using CDM project data registered with UNFCCC since 2008 when EU ETS phase 2 began. As of September 2020, 772 cases of CDM projects in waste disposal and disposal are registered. Biogas technology is the largest, followed by livestock manure processing and biomass production technology. The results of the cluster analysis are summarized as follows: First, on average, projects utilizing AWMS technology are small in size and relatively low in investment costs. This is judged to be relatively low investment costs due to previously attracted foreign investment capital. Second, the average investment cost of CDM projects considered along with waste (No.13), the energy industry (No.1) and agriculture (No.15) was higher than those involving only waste. The analysis of the factors determining the investment cost of the waste sector CDM project showed that, as with cluster analysis, the AWMS technology, which is a livestock manure treatment technology, was lower in the investment cost than those that use other technologies. As a result of multiple regression analysis, the investment cost of the CDM project was analyzed lower in the order of biomass, AWMS, LFG and biogas. Also, the higher the investment cost for CDM projects linked to waste, energy and agriculture, and the better the investment environment, the higher the investment cost. Although no statistical feasibility was obtained, the larger the annual emission reduction, the lower the CDM investment cost.